Date: Tue, 26 Apr 2005 14:46:51 +0000 From: "john pa" <auwooo@hotmail.com> To: freebsd-questions@freebsd.org Subject: Freebsdi386 4.11 release failed to mountroot after make buildworld && make kerne Message-ID: <BAY21-F105EE247520C59B68B74D5C3210@phx.gbl>
next in thread | raw e-mail | index | archive | help
Error after upgrade from fresh install 4.11-release to 4.-stable It fail to mountroot : ufs:/dev/ad4s2a Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rightsreserved. FreeBSD 4.11-STABLE #0: Tue Apr 26 22:14:24 SGT 2005 palem@palem.localdomain:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3198.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1072889856 (1047744K bytes) avail memory = 1038413824 (1014076K bytes) Preloaded elf kernel "kernel" at 0xc05bb000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 12 entries at 0xc00f4df0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=8086 device=2579)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia model 0322 graphics accelerator> at 0.0 irq 10 pcib2: <PCI to PCI bridge (vendor=8086 device=257b)> at device 3.0 on pci0 pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xcf80-0xcf9f mem 0xfe9e0000-0xfe9fffff irq 5 at device 1.0 on pci2 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 10 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: vendor 0x1267 PS/2+USB Mouse, rev 1.10/0.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 5 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 5 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 10 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <USB controller> at 29.7 irq 11 pcib3: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci3: <PCI bus> on pcib3 fwohci0: <VIA VT6306> port 0xdc00-0xdc7f mem 0xfeaff800-0xfeafffff irq 11 at device 3.0 on pci3 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:77:6b:85 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:77:6b:85 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise SATA150 TX2 controller> port 0xd880-0xd8ff,0xdfa0-0xdfaf,0xdf00-0xdf3f mem 0xfeac0000-0xfeadffff,0xfeafe000-0xfeafefff irq 11 at device 4.0 on pci3 atapci0: channels 3 ata2: at 0xfeafe000 on atapci0 ata3: at 0xfeafe000 on atapci0 ata4: at 0xfeafe000 on atapci0 ata4: IDE port pci3: <unknown card> (vendor=0x163c, dev=0x3052) at 11.0 irq 11 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xfeaff400-0xfeaff47f irq 11 at device 12.0 on pci3 xl0: Ethernet address: 00:50:04:18:2c:86 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 ATA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 atapci2: <Intel ICH5 SATA150 controller> port 0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 5 at device 31.2 on pci0 ata5: at 0xefe0 on atapci2 ata6: at 0xefa0 on atapci2 pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 5 pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 5 at device 31.5 on pci0 pcm0: <Analog Devices AD1985 AC97 Codec> orm0: <Option ROM> at iomem 0xc0000-0xcf7ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata1-slave: ATAPI identify retries exceeded ad10: DMA limited to UDMA33, non-ATA66 cable or device ad10: 76319MB <WDC WD800JD-00HKA0> [155061/16/63] at ata5-master UDMA33 acd0: CD-RW <AOPEN COM5232/AAH> at ata1-master PIO4 Fail to Mount root from ufs:/dev/ad4s2a Helpppp _________________________________________________________________ Keep track of Singapore & Malaysia stock prices. http://www.msn.com.sg/money/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY21-F105EE247520C59B68B74D5C3210>