Date: Mon, 07 Oct 2013 15:14:34 -0500 From: Jim Bryant <kc5vdj.freebsd@gmail.com> To: tzoi516 <tzoi516@gmail.com> Cc: freebsd-drivers@freebsd.org Subject: Re: Latitude E6400 Drivers Message-ID: <5253162A.80505@gmail.com> In-Reply-To: <5252F11E.8020404@gmail.com> References: <5251A405.1010304@gmail.com> <5252EB4D.1030604@gmail.com> <5252F11E.8020404@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It doesn't appear to.
3:12:24pm argus(2): pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x02631028 chip=0x2a408086
rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x02631028 chip=0x2a428086
rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset Integrated Graphics Controller'
class = display
subclass = VGA
vgapci1@pci0:0:2:1: class=0x038000 card=0x02631028 chip=0x2a438086
rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset Integrated Graphics Controller'
class = display
uhci0@pci0:0:26:0: class=0x0c0300 card=0x02631028 chip=0x29378086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x02631028 chip=0x29388086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:26:2: class=0x0c0300 card=0x02631028 chip=0x29398086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x02631028 chip=0x293c8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
hdac0@pci0:0:27:0: class=0x040300 card=0x02631028 chip=0x293e8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) HD Audio Controller'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x02631028 chip=0x29408086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:1: class=0x060400 card=0x02631028 chip=0x29428086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:4: class=0x060400 card=0x02631028 chip=0x29488086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 5'
class = bridge
subclass = PCI-PCI
uhci3@pci0:0:29:0: class=0x0c0300 card=0x02631028 chip=0x29348086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci4@pci0:0:29:1: class=0x0c0300 card=0x02631028 chip=0x29358086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci5@pci0:0:29:2: class=0x0c0300 card=0x02631028 chip=0x29368086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x02631028 chip=0x293a8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
pcib4@pci0:0:30:0: class=0x060401 card=0x02631028 chip=0x24488086
rev=0x92 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x02631028 chip=0x29198086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH9M LPC Interface Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x02631028 chip=0x29298086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH9M/M-E SATA AHCI Controller'
class = mass storage
subclass = SATA
ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x02631028 chip=0x29308086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) SMBus Controller'
class = serial bus
subclass = SMBus
iwn0@pci0:12:0:0: class=0x028000 card=0x13218086 chip=0x42328086
rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'WiFi Link 5100'
class = network
bge0@pci0:9:0:0: class=0x020000 card=0x02631028 chip=0x167414e4
rev=0x00 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5756ME Gigabit Ethernet PCI Express'
class = network
subclass = ethernet
cbb0@pci0:2:1:0: class=0x060700 card=0x02631028 chip=0x04761180
rev=0xba hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 II'
class = bridge
subclass = PCI-CardBus
fwohci0@pci0:2:1:1: class=0x0c0010 card=0x02631028 chip=0x08321180
rev=0x04 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C832 IEEE 1394 Controller'
class = serial bus
subclass = FireWire
sdhci0@pci0:2:1:2: class=0x080501 card=0x02631028 chip=0x08221180
rev=0x21 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'
class = base peripheral
subclass = SD host controller
none0@pci0:2:1:3: class=0x088000 card=0x02631028 chip=0x08431180
rev=0x11 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C843 MMC Host Controller'
class = base peripheral
tzoi516 wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Great, thanks. Does pciconf show you having the MEI controller? Is if
> it does, is it none or did you use something else?
>
> On 10/07/13 13:11, Jim Bryant wrote:
>
>> I'm running on an E5500, and it isn't too different.
>>
>> here's an example of my dmesg.
>>
>> Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979,
>> 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of
>> the University of California. All rights reserved. FreeBSD is a
>> registered trademark of The FreeBSD Foundation. FreeBSD
>> 9.2-PRERELEASE #0 r255757: Sat Sep 21 06:32:15 CDT 2013
>>
>> jbryant@argus.electron-tube.net:/usr/obj/usr/src/sys/LATITUDE-E5500-GM45
>>
>>
>>
> amd64
>
>> gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R)
>> Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.04-MHz K8-class CPU)
>> Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17
>> Stepping = 6
>>
>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>
>>
>>
>> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
>>
>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF>
>> TSC: P-state invariant, performance statistics real memory =
>> 4294967296 (4096 MB) avail memory = 4054933504 (3867 MB) Event
>> timer "LAPIC" quality 400 ACPI APIC Table: <DELL M09 >
>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1
>> package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID:
>> 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on
>> motherboard wlan: mac acl policy registered kbd1 at kbdmux0
>> smbios0: <System Management BIOS> at iomem 0xf6c20-0xf6c3e on
>> motherboard smbios0: Version: 2.4, BCD Revision: 2.4 cryptosoft0:
>> <software crypto> on motherboard acpi0: <DELL M09 > on
>> motherboard ACPI Warning: Incorrect checksum in table [TCPA] -
>> 0xC4, should be 0x68 (20110527/tbutils-282) hpet0: <High Precision
>> Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter
>> "HPET" frequency 14318180 Hz quality 950 Event timer "HPET"
>> frequency 14318180 Hz quality 450 Event timer "HPET1" frequency
>> 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz
>> quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440
>> acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of
>> e0000, 20000 (3) failed acpi0: reservation of 100000, dd28d400 (3)
>> failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 atrtc0:
>> <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 Event
>> timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port
>> 0x40-0x43,0x50-0x53 irq 2 on acpi0 Timecounter "i8254" frequency
>> 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz
>> quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality
>> 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b
>> on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934
>> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display>
>> port 0xefe8-0xefef mem 0xf6c00000-0xf6ffffff,0xe0000000-0xefffffff
>> irq 16 at device 2.0 on pci0 acpi_video0: <ACPI video extension> on
>> vgapci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0:
>> aperture size is 256M, detected 32764k stolen memory vgapci1:
>> <VGA-compatible display> mem 0xf6b00000-0xf6bfffff at device 2.1 on
>> pci0 acpi_video1: <ACPI video extension> on vgapci1 ACPI Warning:
>> For \134_SB_.PCI0.VID2._DOD: Return Package has no elements (empty)
>> (20110527/nspredef-500) evaluation of \134_SB_.PCI0.VID2._DOD makes
>> no sense uhci0: <Intel 82801I (ICH9) USB controller> port
>> 0x6f60-0x6f7f irq 20 at device 26.0 on pci0 usbus0 on uhci0 uhci1:
>> <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at
>> device 26.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801I (ICH9) USB
>> controller> port 0x6fa0-0x6fbf irq 22 at device 26.2 on pci0 usbus2
>> on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
>> 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 usbus3: EHCI
>> version 1.0 usbus3 on ehci0 hdac0: <Intel 82801I HDA Controller>
>> mem 0xf6afc000-0xf6afffff irq 21 at device 27.0 on pci0 pcib1:
>> <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci11: <ACPI PCI bus>
>> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci12:
>> <ACPI PCI bus> on pcib2 iwn0: <Intel WiFi Link 5100> mem
>> 0xf69fe000-0xf69fffff irq 17 at device 0.0 on pci12 pcib3: <ACPI
>> PCI-PCI bridge> at device 28.4 on pci0 pci9: <ACPI PCI bus> on
>> pcib3 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC
>> rev. 0x00a200> mem 0xf68f0000-0xf68fffff irq 16 at device 0.0 on
>> pci9 bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
>> miibus0: <MII bus> on bge0 brgphy0: <BCM5722 1000BASE-T media
>> interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX,
>> 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master,
>> 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet
>> address: nn:nn:nn:nn:nn:nn uhci3: <Intel 82801I (ICH9) USB
>> controller> port 0x6f00-0x6f1f irq 20 at device 29.0 on pci0 usbus4
>> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port
>> 0x6f20-0x6f3f irq 21 at device 29.1 on pci0 usbus5 on uhci4 uhci5:
>> <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at
>> device 29.2 on pci0 usbus6 on uhci5 ehci1: <Intel 82801I (ICH9) USB
>> 2.0 controller> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on
>> pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib4: <ACPI PCI-PCI
>> bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib4 cbb0:
>> <RF5C476 PCI-CardBus Bridge> irq 19 at device 1.0 on pci2 cardbus0:
>> <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0:
>> <1394 Open Host Controller Interface> mem 0xf67ff800-0xf67fffff irq
>> 17 at device 1.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0)
>> fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64
>> 38:4f:c0:00:1f:32:1d:e1 fwohci0: Phy 1394a available S400, 1
>> ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0:
>> <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset
>> fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core:
>> node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sdhci0: <RICOH
>> R5C822 SD> mem 0xf67ff600-0xf67ff6ff irq 18 at device 1.2 on pci2
>> sdhci0: 1 slot(s) allocated pci2: <base peripheral> at device 1.3
>> (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on
>> pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9M AHCI SATA
>> controller> port
>> 0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf
>>
>>
>>
> mem 0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0
>
>> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not
>> supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1:
>> <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at
>> channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0
>> ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1100-0x111f
>> mem 0xf6afbf00-0xf6afbfff irq 19 at device 31.3 on pci0 smbus0:
>> <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on
>> smbus0 acpi_lid0: <Control Method Lid Switch> on acpi0
>> acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button>
>> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control
>> Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0:
>> <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on
>> acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0:
>> [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4
>> flags 0x10 on acpi0 tpm0: <Trusted Platform Module> port
>> 0xcb0-0xcbb iomem 0xfed40000-0xfed44fff on acpi0 tpm: Broadcom
>> BCM0102 rev 0x20 ichwd0 on isa0 orm0: <ISA Option ROM> at iomem
>> 0xc0000-0xcffff on isa0 sc0: <System console> at flags 0x100 on
>> isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA
>> VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: <ATA
>> channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: <ATA
>> channel> at port 0x170-0x177,0x376 irq 15 on isa0 coretemp0: <CPU
>> On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency
>> Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced
>> SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal
>> Control> on cpu1 SGI XFS with large block numbers, tracing, no
>> debug enabled Timecounters tick every 1.000 msec bge0f0: Ethernet
>> address: nn:nn:nn:nn:nn:nn bge0f1: Ethernet address:
>> nn:nn:nn:nn:nn:nn bge0f2: Ethernet address: nn:nn:nn:nn:nn:nn
>> bge0f3: Ethernet address: nn:nn:nn:nn:nn:nn IPsec: Initialized
>> Security Association Processing. ncp_load: loaded ipfw2 (+ipv6)
>> initialized, divert enabled, nat enabled, default to accept,
>> logging disabled DUMMYNET 0 with IPv6 initialized (100409)
>> firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0:
>> bus manager 0 load_dn_sched dn_sched FIFO loaded load_dn_sched
>> dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded
>> load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+
>> loaded hdacc0: <IDT 92HD71B7 HDA CODEC> at cad 0 on hdac0 hdaa0:
>> <IDT 92HD71B7 Audio Function Group> at nid 1 on hdacc0 pcm0: <IDT
>> 92HD71B7 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,14 on hdaa0 pcm1:
>> <IDT 92HD71B7 (Ext-Left Analog Line-out)> at nid 15 on hdaa0 pcm2:
>> <IDT 92HD71B7 (Left Digital)> at nid 30 on hdaa0 hdacc1: <Intel
>> Cantiga HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Cantiga Audio
>> Function Group> at nid 1 on hdacc1 pcm3: <Intel Cantiga (HDMI 8ch)>
>> at nid 3 on hdaa1 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps
>> Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3:
>> 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0
>> usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB
>> v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at
>> usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr
>> 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root
>> HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel>
>> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00,
>> addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI
>> root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1:
>> <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev
>> 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5:
>> <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>> ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0,
>> rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7:
>> <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
>> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC
>> WD5000BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device ada0:
>> 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0:
>> Command Queueing enabled ada0: 476940MB (976773168 512 byte
>> sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP:
>> AP CPU #1 Launched! hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
>> TSC/1/64/0x20<REA>
>> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC>
>> IAF/3/40/0x67<INT,USR,SYS,REA,WRI> cd0 at ahcich1 bus 0 scbus1
>> target 0 lun 0 cd0: <HL-DT-ST CDRW/DVD GCCT20N A106> Removable
>> CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA2,
>> ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size
>> failed: NOT READY, Medium not present uhub0: 2 ports with 2
>> removable, self powered uhub1: 2 ports with 2 removable, self
>> powered uhub2: 2 ports with 2 removable, self powered uhub4: 2
>> ports with 2 removable, self powered uhub5: 2 ports with 2
>> removable, self powered uhub6: 2 ports with 2 removable, self
>> powered Root mount waiting for: usbus7 usbus3 Root mount waiting
>> for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered
>> uhub7: 6 ports with 6 removable, self powered Root mount waiting
>> for: usbus7 usbus3 Root mount waiting for: usbus7 ugen2.2: <vendor
>> 0x08ff> at usbus2 Root mount waiting for: usbus7 Root mount waiting
>> for: usbus7 Root mount waiting for: usbus7 ugen7.2: <KMicron> at
>> usbus7 umass0: <MSC Bulk-Only Transfer> on usbus7
>> (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00
>> 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status
>> Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
>> (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0
>> (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error
>> 22, Unretryable error da0 at umass-sim0 bus 0 scbus6 target 0 lun
>> 0 da0: <WDC WD30 EZRX-00DC0B0 > Fixed Direct Access SCSI-5 device
>> da0: 40.000MB/s transfers da0: 2861588MB (5860533168 512 byte
>> sectors: 255H 63S/T 364801C) da0: quirks=0xa<NO_6_BYTE,4K> Root
>> mount waiting for: usbus7 ugen7.3: <JMicron> at usbus7 umass1: <MSC
>> Bulk-Only Transport> on usbus7 (probe0:umass-sim1:1:0:0): REPORT
>> LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
>> (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
>> (probe0:umass-sim1:1:0:0): SCSI status: Check Condition
>> (probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0
>> (Invalid command operation code) (probe0:umass-sim1:1:0:0): Error
>> 22, Unretryable error da1 at umass-sim1 bus 1 scbus7 target 0 lun
>> 0 da1: <WDC WD30 EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6
>> device da1: 40.000MB/s transfers da1: 2861588MB (5860533168 512
>> byte sectors: 255H 63S/T 364801C) da1: quirks=0xa<NO_6_BYTE,4K> da2
>> at umass-sim1 bus 1 scbus7 target 0 lun 1 da2: <WDC WD30
>> EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6 device da2:
>> 40.000MB/s transfers da2: 2861588MB (5860533168 512 byte sectors:
>> 255H 63S/T 364801C) da2: quirks=0xa<NO_6_BYTE,4K> Root mount
>> waiting for: usbus7 ugen7.4: <vendor 0x05e3> at usbus7 uhub8:
>> <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> on
>> usbus7 ugen5.2: <Logitech> at usbus5 ums0: <Logitech USB Receiver,
>> class 0/0, rev 2.00/57.01, addr 2> on usbus5 ums0: 16 buttons and
>> [XYZT] coordinates ID=0 Root mount waiting for: usbus7 uhid0:
>> <Logitech USB Receiver, class 0/0, rev 2.00/57.01, addr 2> on
>> usbus5 uhub8: 4 ports with 3 removable, self powered Root mount
>> waiting for: usbus7 ugen7.5: <Sunplus Technology Inc.> at usbus7
>> umass2: <Bulk Only Interface> on usbus7 da3 at umass-sim2 bus 2
>> scbus8 target 0 lun 0 da3: <WDC WD20 EADS-11R6B1 > Fixed Direct
>> Access SCSI-2 device da3: 40.000MB/s transfers da3: 1907729MB
>> (3907029168 512 byte sectors: 255H 63S/T 243201C) da3:
>> quirks=0x2<NO_6_BYTE> ugen7.6: <vendor 0x05e3> at usbus7 uhub9:
>> <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 6> on
>> usbus7 uhub9: 4 ports with 4 removable, self powered ugen7.7:
>> <vendor 0x1130> at usbus7 ukbd0: <vendor 0x1130 PCsensor Temper,
>> class 0/0, rev 1.10/1.50, addr 7> on usbus7 kbd2 at ukbd0 uhid1:
>> <vendor 0x1130 PCsensor Temper, class 0/0, rev 1.10/1.50, addr 7>
>> on usbus7 Trying to mount root from ufs:/dev/ada0s4a [rw]...
>> interface oldnfs.1 already present in the KLD 'kernel'!
>> linker_load_file: Unsupported file type nfsd: can't register svc
>> name fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 g_dev_taste:
>> make_dev_p() failed (gp->name=md0s4, error=17) drm0: <Mobile
>> Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI
>> enabled 1 message(s) info: [drm] AGP at 0xe0000000 256MB info:
>> [drm] Initialized i915 1.6.0 20080730 ugen7.8: <Samsung
>> Electronics> at usbus7 umass3: <Mass Storage> on usbus7 da4 at
>> umass-sim3 bus 3 scbus9 target 0 lun 0 da4: <Android UMS Composite
>> 0001> Removable Direct Access SCSI-2 device da4: 40.000MB/s
>> transfers da4: Attempt to query device size failed: NOT READY,
>> Medium not present da4: quirks=0x2<NO_6_BYTE> da5 at umass-sim3 bus
>> 3 scbus9 target 0 lun 1 da5: <Android UMS Composite 0001> Removable
>> Direct Access SCSI-2 device da5: 40.000MB/s transfers da5: Attempt
>> to query device size failed: NOT READY, Medium not present da5:
>> quirks=0x2<NO_6_BYTE>
>>
>> tzoi516 wrote: Hi,
>>
>> I'm able to find solutions to most drivers, but I'm having trouble
>> determining what to load for these:
>>
>> none0@pci0:0:3:0: class=0x078000 card=0x02331028
>> chip=0x2a448086 rev=0x07 hdr=0x00 vendor = 'Intel Corporation'
>> device = 'Mobile 4 Series Chipset MEI Controller' class =
>> simple comms bar [10] = type Memory, range 64, base 0xf6fd9ef0,
>> size 16, enabled cap 01[50] = powerspec 3 supports D0 D3 current
>> D0 cap 05[8c] = MSI supports 1 message, 64 bit
>>
>> none1@pci0:0:3:3: class=0x070002 card=0x02331028
>> chip=0x2a478086 rev=0x07 hdr=0x00 vendor = 'Intel Corporation'
>> device = 'Mobile 4 Series Chipset AMT SOL Redirection' class
>> = simple comms subclass = UART bar [10] = type I/O Port, range
>> 32, base 0xef88, size 8, enabled bar [14] = type Memory, range
>> 32, base 0xf6fda000, size 4096, enabled cap 01[c8] = powerspec 3
>> supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64
>> bit
>>
>> none2@pci0:0:31:3: class=0x0c0500 card=0x02331028
>> chip=0x29308086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation'
>> device = '82801I (ICH9 Family) SMBus Controller' class =
>> serial bus subclass = SMBus bar [10] = type Memory, range 64,
>> base 0xf6fd9f00, size 256, enabled bar [20] = type I/O Port,
>> range 32, base 0x1100, size 32, enabled
>>
>>
>> none3@pci0:3:1:1: class=0x080501 card=0x02331028
>> chip=0x08221180 rev=0x21 hdr=0x00 vendor = 'Ricoh Co Ltd'
>> device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' class
>> = base peripheral subclass = SD host controller bar [10] = type
>> Memory, range 32, base 0xf1bff600, size 256, enabled cap 01[80] =
>> powerspec 2 supports D0 D1 D2 D3 current D0
>>
>> none4@pci0:3:1:2: class=0x088000 card=0x02331028
>> chip=0x08431180 rev=0x11 hdr=0x00 vendor = 'Ricoh Co Ltd'
>> device = 'R5C843 MMC Host Controller' class = base
>> peripheral bar [10] = type Memory, range 32, base 0xf1bff700,
>> size 256, enabled cap 01[80] = powerspec 2 supports D0 D1 D2 D3
>> current D0
>>
>> I know people are busy, but any links or references to help find
>> drivers or modules would be appreciated. I've used man and PCI
>> driver sites to help narrow down, but nothing helped. mmc and mmcsd
>> modules don't work with the Ricoh devices, per pciconf. Thanks.
>>
>>
>>> _______________________________________________
>>> freebsd-drivers@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-drivers To
>>> unsubscribe, send any mail to
>>> "freebsd-drivers-unsubscribe@freebsd.org" .
>>>
>>>
>>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.19 (FreeBSD)
> Comment: Using GnuPG with undefined - http://www.enigmail.net/
>
> iQEcBAEBAgAGBQJSUvEeAAoJEDHcsSNRIRfJ/2oH/RnMhzThoHrIf9X7XdYYD1/S
> kRNAOe7yF7+Mh9YW/uPuKoPjmgNUxOLK8iHXtSuMcXQkDYvsPRPxtHSjgbk8Y8cC
> +HKTZA7LTLhQ60DNUXHY7hl3dgqhuqFfZLdXQoi1vmXLNDL97hMnHlp5825S0jHf
> ZhFdg+BIgCOYpydScYCSmcCnzn2lL5wsl0kbiPATkhl3YfvDKvwMwoopiGcK9bPf
> Q3KVyGYE1hvg9JJMMMamMnMDVJrJLmrVJ3wqX7F5Ay3DsxR1bFU1k8/xww6Hgcwq
> 8KqZywCQN1W9zqOM/r6CWcZkheC0rg+zG+GV+UYKcVVK3kO9dK2uvTm00kMnAvE=
> =JOcC
> -----END PGP SIGNATURE-----
>
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5253162A.80505>