Date: Mon, 18 Feb 2008 11:50:24 +0100 From: Josef Pojsl <jp@tns.cz> To: Eygene Ryabinkin <rea-fbsd@codelabs.ru> Cc: freebsd-net@freebsd.org, farrokhi@FreeBSD.org, Claudio Jeker <cjeker@diehard.n-r-g.com> Subject: Re: ospf cost and route selection (openospfd) Message-ID: <20080218105024.GA1080@bonifac.tns.cz> In-Reply-To: <5ZtxcL6cRo84tm1uYJcECu4DBCo@49l6neKHPg6j4SHeejH198Klzys> References: <jV/l2UkZT%2BCCNuE6npJv1SBs5CE@UCvaDHSF%2BGDEPQ7TSpdR%2BlgUSQM> <20080207074944.GA56085@bonifac.tns.cz> <Ntfg81bhcEB6BPmKzMb2iTN9oBA@ebJhc%2B9glC7W5vxxBJVH9quBZr0> <BeIqwBu0LkRXuGRr9c834oJe11M@mkgs2gFQr6GPddtmfyJSxMBvIxA> <20080208105357.GF1142@bonifac.tns.cz> <BT4TiDDxXXg%2BA3Hm/RZG4ajuso0@iW7JDlNxJglv8iYoJTWnPBJ0iaQ> <20080213203012.GB1157@bonifac.tns.cz> <mgxG59t6NyZOK/aOCUXqAa4UjwQ@nlDRp1tQLLdsXUKSIGNiprMk72M> <i/Lmkx/GjpxzqLdQCjJf243w/hg@7sDP7kkrk5jQp0SODPrr0/WdZZY> <5ZtxcL6cRo84tm1uYJcECu4DBCo@49l6neKHPg6j4SHeejH198Klzys>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Eygene, On Sun, Feb 17, 2008 at 08:11:04PM +0300, Eygene Ryabinkin wrote: > I should more carefully study current OpenBSD CVS: the fix for your > problem was committed 5 months ago. Claudio mentioned it (and he > is the author of the patch itself), but the fix didn't get into 4.2. > > The funny thing is that I had wrote simular (but lower quality) fix > for the problem today and decided to look at the current OpenOSPFD > code. And looking at the last revision of ospfd/rde_spf.c I had > found calls to calc_nexthop() that were very simular to mine ones ;)) > > OK, to the point: the inlined patch should go to the 'files' > directory, named 'patch-p2p_interfaces'. I assume that all my > previous patches to make 4.2 to compile and run were applied. Thaks a lot, I have applied that patch and it works! Ospfctl shows the right interface and routing table is correct as well. I have tried that for my simple config with two machines and two gre interfaces. The big picture of my test network includes six machines and about twelve interfaces, so I am about to spread that patch and start tests of the whole thing. Thanks again, -- Josef
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080218105024.GA1080>