Date: Wed, 3 Aug 2005 11:12:27 +0200 (CEST) From: "Christophe Yayon" <lists@nbux.com> To: "rmkml" <rmkml@free.fr> Cc: freebsd-bugs@freebsd.org Subject: Re: freebsd 4.11-stable strange problem dl360g4 partial freeze Message-ID: <44243.194.51.215.62.1123060347.squirrel@webmail.nbux.com> In-Reply-To: <Pine.LNX.4.63.0508031040110.1312@npre.npre.pbz> References: <19152.194.51.215.62.1123056087.squirrel@webmail.nbux.com> <Pine.LNX.4.63.0508031005050.1312@npre.npre.pbz> <31061.194.51.215.62.1123058050.squirrel@webmail.nbux.com> <Pine.LNX.4.63.0508031040110.1312@npre.npre.pbz>
next in thread | previous in thread | raw e-mail | index | archive | help
Hum, very strange, This morning the problem have disappeared ! no more pb with any 'find /' or dmesg or recursive ls ... I have tried to reboot or cold boot the server to see if it appears again, but no luck, the problem have magically disappeared ... If it appears again, i will try to disable htt ... Thanks. > ok, > same pb if you disable htt/second proc ? > Regards > Rmkml > > > On Wed, 3 Aug 2005, Christophe Yayon wrote: > >> Date: Wed, 3 Aug 2005 10:34:10 +0200 (CEST) >> From: Christophe Yayon <lists@nbux.com> >> To: rmkml <rmkml@free.fr> >> Cc: freebsd-bugs@freebsd.org >> Subject: Re: freebsd 4.11-stable strange problem dl360g4 partial freeze >> >> Hi, >> >> I use a ciss 6i (which appears to be supported in man page of ciss) >> >> dmesg : >> Copyright (c) 1992-2005 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD 4.11-STABLE #0: Tue Aug 2 16:48:11 CEST 2005 >> root@pm1b.sofinco.fr:/mnt/freebsd/src/sys/compile/PM >> Timecounter "i8254" frequency 1193182 Hz >> CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.14-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI, >> MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Hyperthreading: 2 logical CPUs >> real memory = 2147430400 (2097100K bytes) >> avail memory = 2088095744 (2039156K bytes) >> Changing APIC ID for IO APIC #1 from 0 to 9 on chip >> Programming 24 pins in IOAPIC #0 >> IOAPIC #0 intpin 2 -> irq 0 >> Programming 24 pins in IOAPIC #1 >> Programming 24 pins in IOAPIC #2 >> Programming 24 pins in IOAPIC #3 >> FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs >> cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 >> cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 >> io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec00000 >> io1 (APIC): apic id: 9, version: 0x00178020, at 0xfec10000 >> io2 (APIC): apic id: 10, version: 0x00178020, at 0xfec82000 >> io3 (APIC): apic id: 11, version: 0x00178020, at 0xfec82100 >> Preloaded elf kernel "kernel" at 0xc035d000. >> Warning: Pentium 4 CPU: PSE disabled >> Pentium Pro MTRR support enabled >> md0: Malloc disk >> npx0: <math processor> on motherboard >> npx0: INT 16 interface >> pcib0: <Host to PCI bridge> on motherboard >> IOAPIC #0 intpin 16 -> irq 2 >> IOAPIC #0 intpin 19 -> irq 16 >> IOAPIC #0 intpin 23 -> irq 17 >> pci0: <PCI bus> on pcib0 >> pcib1: <PCI to PCI bridge (vendor=8086 device=3595)> irq 2 at device 2.0 >> on pci0 >> pci13: <PCI bus> on pcib1 >> pcib2: <PCI to PCI bridge (vendor=8086 device=3597)> irq 2 at device 4.0 >> on pci0 >> pci6: <PCI bus> on pcib2 >> pcib3: <PCI to PCI bridge (vendor=8086 device=0329)> at device 0.0 on >> pci6 >> pci7: <PCI bus> on pcib3 >> pcib4: <PCI to PCI bridge (vendor=8086 device=032a)> at device 0.2 on >> pci6 >> pci10: <PCI bus> on pcib4 >> pcib5: <PCI to PCI bridge (vendor=8086 device=3599)> irq 2 at device 6.0 >> on pci0 >> pci3: <PCI bus> on pcib5 >> pcib6: <PCI to PCI bridge (vendor=8086 device=25ae)> at device 28.0 on >> pci0 >> IOAPIC #1 intpin 0 -> irq 19 >> IOAPIC #1 intpin 1 -> irq 20 >> IOAPIC #1 intpin 2 -> irq 21 >> pci2: <PCI bus> on pcib6 >> ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem >> 0xfdf80000-0xfdfbffff,0xfdff0000-0xfdff1fff irq 19 at device >> 1.0 on pci2 >> bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem >> 0xfdf70000-0xfdf7ffff irq 20 at device 2. >> 0 on pci2 >> bge0: Ethernet address: 00:12:79:91:ab:bd >> miibus0: <MII bus> on bge0 >> brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >> 1000baseTX-FDX, auto >> bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem >> 0xfdf60000-0xfdf6ffff irq 21 at device 2. >> 1 on pci2 >> bge1: Ethernet address: 00:12:79:91:ab:bc >> miibus1: <MII bus> on bge1 >> brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 >> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >> 1000baseTX-FDX, auto >> uhci0: <UHCI (generic) USB controller> port 0x2000-0x201f irq 2 at >> device >> 29.0 on pci0 >> usb0: <UHCI (generic) USB controller> on uhci0 >> usb0: USB revision 1.0 >> uhub0: 2 ports with 2 removable, self powered >> uhci1: <UHCI (generic) USB controller> port 0x2020-0x203f irq 16 at >> device >> 29.1 on pci0 >> usb1: <UHCI (generic) USB controller> on uhci1 >> usb1: USB revision 1.0 >> uhub1: 2 ports with 2 removable, self powered >> pci0: <unknown card> (vendor=0x8086, dev=0x25ab) at 29.4 >> pci0: <unknown card> (vendor=0x8086, dev=0x25ac) at 29.5 >> pci0: <USB controller> at 29.7 irq 17 >> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on >> pci0 >> IOAPIC #0 intpin 21 -> irq 22 >> IOAPIC #0 intpin 22 -> irq 23 >> pci1: <PCI bus> on pcib7 >> pci1: <ATI Mach64-GR graphics accelerator> at 3.0 >> pci1: <unknown card> (vendor=0x0e11, dev=0xb203) at 4.0 irq 22 >> pci1: <unknown card> (vendor=0x0e11, dev=0xb204) at 4.2 irq 23 >> isab0: <PCI to ISA bridge (vendor=8086 device=25a1)> at device 31.0 on >> pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel 6300ESB ATA100 controller> port >> 0x500-0x50f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq >> 18 at device 31.1 on pci0 >> ata0: at 0x1f0 irq 14 on atapci0 >> ata1: at 0x170 irq 15 on atapci0 >> eisa0: <EISA bus> on motherboard >> mainboard0: <CPQ0741 (System Board)> on eisa0 slot 0 >> orm0: <Option ROMs> at iomem >> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0 >> pmtimer0 on isa0 >> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on >> isa0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >> kbd0 at atkbd0 >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> psm0: model Generic PS/2 mouse, device ID 0 >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >> isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >> sio0: type 16550A >> sio1 at port 0x2f8-0x2ff irq 3 on isa0 >> sio1: type 16550A >> APIC_IO: Testing 8254 interrupt delivery >> APIC_IO: routing 8254 via IOAPIC #0 intpin 2 >> ata0-slave: ATA identify retries exceeded >> SMP: AP CPU #1 Launched! >> acd0: CDROM <COMPAQ CD-ROM SN-124> at ata0-master PIO4 >> Mounting root from ufs:/dev/da0s1a >> da0 at ciss0 bus 0 target 0 lun 0 >> da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device >> da0: 135.168MB/s transfers >> da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C) >> >> >> and no syslog event ... >> >> Thanks >> >>> what scsi/sata/ide use ? >>> send dmesg ? >>> send last syslog event ? >>> Regards >>> Rmkml >>> >>> >>> On Wed, 3 Aug 2005, Christophe Yayon wrote: >>> >>>> Date: Wed, 3 Aug 2005 10:01:27 +0200 (CEST) >>>> From: Christophe Yayon <lists@nbux.com> >>>> To: freebsd-bugs@freebsd.org, freebsd-hackers@freebsd.org >>>> Subject: freebsd 4.11-stable strange problem dl360g4 partial freeze >>>> >>>> Hi all, >>>> >>>> I have just installed a new (but good old) freebsd 4.11-stable on a HP >>>> DL360G4 and i have a very strange issue : when i do a simple command >>>> like >>>> 'find /' or 'dmesg' or a 'ls' in a directory with lot of files ; the >>>> command is pausing ... >>>> I explain, the result of the command begin and afer few result lines, >>>> it >>>> pausing (like a partial freeze of 1 or 2 seconds) and continue, and >>>> pausing again, and then continue... >>>> >>>> I have tried to recompile a new kernel and world (from stable of >>>> yesterday) but i have the same woes. I also try to truss, but no >>>> strange >>>> messages, no log no kernel messages... >>>> >>>> I have tried on the same server the 5.4-STABLE (with other disks) and >>>> i >>>> have not this problem... But i have to install a 4.11 version, because >>>> of >>>> commercial software... Is it a specific issue with freebsd 4 ? >>>> How can i do to debug it ? Do you have any informations about this ? >>>> >>>> >>>> >>>> Thanks in advance. >>>> >>>> >>>> _______________________________________________ >>>> freebsd-hackers@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >>>> To unsubscribe, send any mail to >>>> "freebsd-hackers-unsubscribe@freebsd.org" >>>> >>> >> >> >> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44243.194.51.215.62.1123060347.squirrel>