Date: Tue, 05 Jul 2011 13:30:47 +0200 From: Bernt Hansson <bernt@bah.homeip.net> To: Achilleas Mantzios <achill@matrix.gatewaynet.com> Cc: freebsd-multimedia@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: FreeBSD and controlling an alarm via relay Message-ID: <4E12F5E7.3020905@bah.homeip.net> In-Reply-To: <201107051302.55404.achill@matrix.gatewaynet.com> References: <201107041339.22470.achill@matrix.gatewaynet.com> <4E12CE42.20305@bah.homeip.net> <201107051302.55404.achill@matrix.gatewaynet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
2011-07-05 12:02, Achilleas Mantzios skrev: > Στις Tuesday 05 July 2011 11:41:38 ο/η Bernt Hansson έγραψε: >> 2011-07-04 12:39, Achilleas Mantzios skrev: >>> Hello, sorry for the cross-post but i believe this question might seat in both lists. >>> I am the guy who had the done the old 1.23.3 zoneminder port some years ago, and i am thinking of installing/testing >>> the new 1.24.4 port, submitted by bsam@FreeBSD.org. >>> Besides the basic functions, i am thinking of re-using some old techniques by which i controlled >>> the home alarm via a NC/NO circuit (basically it was an enhanced door contact), >>> driven by an old zyXel modem, which in turn was driven by a small perl program driving the com port, and >>> which was called by a deamon reading zoneminder shared memory info directly. >>> That way i could trigger the alarm system getting into alarm state, whenever zoneminder detected motion, >>> in a fully controlled and programmatic way. >> >> Is this what you you are looking for >> >> http://www.telldus.se/products/tellstick >> > > Basically i am thinking of something like this: > http://www.ebay.co.uk/itm/USB-Eight-Channel-Relay-Board-RS232-Serial-Controlled-/110710829016?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item19c6e12fd8 > a USB controlled 8-channel relay board, rs232 serial controlled OK. Velleman has 8 & 16 channel relay boards, K8056, K6714 (8channels) and K6714-16 (16Channels). I have an schematic from elektor/elektuur with which you can control 64+ outputs from the printerport. > What would be my chances with this on FreeBSD 8.2? >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E12F5E7.3020905>