Date: Tue, 21 Aug 2007 01:59:21 GMT From: Christopher Davis <loafier@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 125476 for review Message-ID: <200708210159.l7L1xL0G029581@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=125476 Change 125476 by loafier@chrisdsoc on 2007/08/21 01:58:53 integrate Affected files ... .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#5 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#3 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml#6 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/introduction/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml#3 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/hu_HU.ISO8859-2/articles/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/hu_HU.ISO8859-2/articles/explaining-bsd/Makefile#1 branch .. //depot/projects/soc2007/loafier_busalloc/doc/hu_HU.ISO8859-2/articles/explaining-bsd/article.sgml#1 branch .. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/bibliography/chapter.sgml#3 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/install/chapter.sgml#5 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/share/sgml/trademarks.ent#3 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/freebsd.ent#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/man-refs.ent#5 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/trademarks.ent#3 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/zh_TW.Big5/books/handbook/install/chapter.sgml#3 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/MOVED#6 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.sites.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Tools/scripts/README#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Tools/scripts/neededlibs.sh#1 branch .. //depot/projects/soc2007/loafier_busalloc/ports/Tools/scripts/resolveportsfromlibs.sh#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/BASE-VER#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/DATESTAMP#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/Makefile.in#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/calls.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/combine.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/arm/arm.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/arm/cirrus.md#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/i386.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/i386.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/i386.md#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/sse.md#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/mips/iris6.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/rs6000/predicates.md#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/rs6000/rs6000.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/double.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/extended.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatundidf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatundisf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatunsidf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatunsisf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/op-2.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/op-4.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/op-common.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/quad.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/sparc/sparc.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/call.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/class.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/cp-tree.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/decl.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/decl2.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/init.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/parser.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/pt.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/semantics.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/typeck.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/typeck2.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/doc/cpp.1#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/doc/gcc.1#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/doc/gcov.1#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/dwarf2out.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/except.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/fold-const.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/function.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/gimplify.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/gthr-posix.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/gthr-posix.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/loop-iv.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/objc/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/omp-low.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/pointer-set.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/pointer-set.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/reload.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-if-conv.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-ssa-loop-niter.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-ssa-operands.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-ssa-structalias.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-vrp.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/version.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/include/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libcpp/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libdecnumber/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libgomp/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libgomp/config/posix/lock.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libgomp/sections.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libiberty/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libmudflap/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libssp/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/less/main.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libobjc/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/ChangeLog#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/acinclude.m4#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/config.h.in#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/configure#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/Makefile.am#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/Makefile.in#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/bits/ostream.tcc#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/bits/ostream_insert.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/ext/throw_allocator.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/std/std_fstream.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/libsupc++/exception#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/libsupc++/new#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/libsupc++/typeinfo#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/etc.arm/ttys#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/namedb/named.conf#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/lockd#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/nfslocking#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/statd#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/gnu/lib/libgcc/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/gnu/lib/libstdc++/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_read_support_format_tar.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_write_disk.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_read_format_gtar_sparse.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_write_disk_perms.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/article.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/artheader.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/hw.ent#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/intro.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/Makefile.inc#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/amd64/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/amd64/article.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/abstract.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/artheader.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/install.ent#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/install.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/layout.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/trouble.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/upgrade.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/i386/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/i386/article.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/ia64/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/ia64/article.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/pc98/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/pc98/article.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/powerpc/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/powerpc/article.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/sparc64/Makefile#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/sparc64/article.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/sparc64/install.sgml#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/readme/article.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/relnotes/article.sgml#6 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/share/examples/Makefile.relnotesng#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/share/misc/dev.archlist.txt#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/share/sgml/release.ent#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sbin/atacontrol/atacontrol.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sbin/reboot/boot_i386.8#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sbin/tunefs/tunefs.8#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man4/mfi.4#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man4/ng_fec.4#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man5/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man5/boot.config.5#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/share/mk/sys.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/amd64/conf/NOTES#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/amd64/include/specialreg.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/arm/arm/busdma_machdep.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/boot/arm/at91/boot2/boot2.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_proto.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_syscall.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_syscalls.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_sysent.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/syscalls.master#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/opensolaris/sys/proc.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/NOTES#5 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/files.amd64#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/files.i386#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ata/ata-raid.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/coretemp/coretemp.c#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_t3_hw.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_adapter.h#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_ioctl.h#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_l2t.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_l2t.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_main.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_offload.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_offload.h#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_sge.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/dcons/dcons_os.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ichwd/ichwd.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ichwd/ichwd.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfi.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfi_disk.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfi_pci.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfireg.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfivar.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mpt/mpt.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mpt/mpt.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mpt/mpt_cam.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/re/if_re.c#5 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/usb/ehci.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/fs/msdosfs/msdosfs_vfsops.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/fs/tmpfs/tmpfs_vnops.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/gnu/fs/ext2fs/ext2_vfsops.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/gnu/fs/xfs/FreeBSD/xfs_mountops.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/i386/conf/NOTES#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/i386/include/specialreg.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/init_sysent.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_cpu.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_switch.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_thr.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/sched_ule.c#5 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/syscalls.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/syscalls.master#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/systrace_args.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_aio.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_mount.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_subr.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/Makefile#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/coretemp/Makefile#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/netgraph/bluetooth/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/net/bridgestp.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/TODO#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/ng_h4.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/ng_h4_prse.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/ng_h4_var.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/ng_base.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_asconf.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_input.c#5 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_output.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_pcb.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_timer.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_usrreq.c#5 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctputil.c#5 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/tcp_subr.c#4 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/include/intr_machdep.h#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/include/md_var.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/include/openpicvar.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powermac/hrowpic.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powermac/hrowpicvar.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powermac/openpic_macio.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/autoconf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/interrupt.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/intr_machdep.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/nexus.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/openpic.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/pic_if.m#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/psim/openpic_iobus.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/ata.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/syscall.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/syscall.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/sysproto.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/thr.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/device_pager.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/phys_pager.c#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_map.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_map.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_mmap.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/freebsd-update/freebsd-update.sh#3 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/rpc.statd/file.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/sysinstall/menus.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/en/gnome/news.xml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/en/relnotes.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/ru/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/share/sgml/commercial.consult.xml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/share/sgml/commercial.isp.xml#3 integrate .. //depot/projects/soc2007/loafier_busalloc/www/share/sgml/commercial.software.xml#2 integrate Differences ... ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#5 (text+ko) ==== @@ -1,4 +1,4 @@ -<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.720 2007/08/10 14:34:12 cognet Exp $ --> +<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.721 2007/08/19 14:58:36 gabor Exp $ --> <!-- NOTE TO COMMITTERS: Contributors lists are sorted in alphabetical order by first name. @@ -7623,6 +7623,11 @@ </listitem> <listitem> + <para>Pontus Stenetorp + <email>ninjin@kth.se</email></para> + </listitem> + + <listitem> <para>Powerdog Industries <email>kevin.ruddy@powerdog.com</email></para> </listitem> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml#2 (text+ko) ==== @@ -25,7 +25,7 @@ <holder>The FreeBSD Project</holder> </copyright> - <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml,v 1.10 2007/03/04 13:33:06 yar Exp $</pubdate> + <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml,v 1.13 2007/08/16 13:08:42 yar Exp $</pubdate> <legalnotice id="trademarks" role="trademarks"> &tm-attrib.freebsd; @@ -1096,8 +1096,21 @@ </callout> <callout arearefs="rcng-hookup-keyword"> - <para><anchor id="keywords">There are several keywords used - in &os;:</para> + <para><anchor id="keywords">As we remember from the above text, + &man.rcorder.8; keywords can be used to select or leave + out some scripts. Namely any &man.rcorder.8; consumer + can specify through <option>-k</option> and <option>-s</option> + options which keywords are on the <quote>keep list</quote> and + <quote>skip list</quote>, respectively. From all the + files to be dependency sorted, &man.rcorder.8; will pick + only those having a keyword from the keep list (unless empty) + and not having a keyword from the skip list.</para> + + <para>In &os;, &man.rcorder.8; is used by + <filename>/etc/rc</filename> and + <filename>/etc/rc.shutdown</filename>. These two scripts + define the standard list of &os; <filename>rc.d</filename> + keywords and their meanings as follows:</para> <variablelist> <varlistentry> @@ -1127,10 +1140,43 @@ <term><literal>shutdown</literal></term> <listitem> - <para>The script wants to be run during system - shutdown. Without the keyword listed, - <filename>/etc/rc.shutdown</filename> would ignore - it for faster shutdown.</para> + <para>This keyword is to be listed + <emphasis>explicitly</emphasis> if the service needs + to be stopped before system shutdown.</para> + + <note> + <para>When the system is going to shut down, + <filename>/etc/rc.shutdown</filename> runs. It + assumes that most <filename>rc.d</filename> scripts + have nothing to do at that time. Therefore + <filename>/etc/rc.shutdown</filename> + selectively invokes <filename>rc.d</filename> + scripts with the <literal>shutdown</literal> + keyword, effectively ignoring the + rest of the scripts. For even faster shutdown, + <filename>/etc/rc.shutdown</filename> passes + the <option>faststop</option> command to the scripts + it runs so that they skip preliminary checks, e.g., + the pidfile check. As dependent services should be + stopped before their prerequisites, + <filename>/etc/rc.shutdown</filename> runs the scripts + in reverse dependency order.</para> + + <para>If writing a real + <filename>rc.d</filename> script, you should + consider whether it is relevant at system shutdown + time. E.g., if your script does its work in + response to the <option>start</option> command + only, then you need not include this keyword. + However, if your script manages a service, it is + probably a good idea to stop it before the system + proceeds to the final stage of its shutdown + sequence described in &man.halt.8;. In particular, + a service should be stopped explicitly if it needs + considerable time or special actions to shut down + cleanly. A typical example of such a service is + a database engine.</para> + </note> </listitem> </varlistentry> </variablelist> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#3 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.398 2007/08/02 08:21:53 blackend Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.399 2007/08/19 18:33:27 blackend Exp $ --> <chapter id="advanced-networking"> @@ -2771,6 +2771,91 @@ the full <hostid role="netmask">/24</hostid> address range can be allocated without subnetting.</para> </sect3> + + <sect3> + <title>SNMP Monitoring</title> + + <para>The bridge interface and STP parameters can be monitored + via the SNMP daemon which is included in the &os; base + system. The exported bridge MIBs conform to the IETF + standards so any SNMP client or monitoring package can be + used to retrieve the data.</para> + + <para>On the bridge machine uncomment the + <literal>begemotSnmpdModulePath."bridge" = + "/usr/lib/snmp_bridge.so"</literal> line from + <filename>/etc/snmp.config</filename> and start the + <application>bsnmpd</application> daemon. Other + configuration such as community names and access lists may + need to be modified. See &man.bsnmpd.1; and + &man.snmp.bridge.3; for more information.</para> + + <para>The following examples use the + <application>Net-SNMP</application> software (<filename + role="package">net-mgmt/net-snmp</filename>) to query a + bridge, the <filename + role="package">net-mgmt/bsnmptools</filename> port can also + be used. From the SNMP client host add to + <filename>$HOME/.snmp/snmp.conf</filename> the following + lines to import the bridge MIB definitions in to + <application>Net-SNMP</application>:</para> + + <programlisting>mibdirs +/usr/share/snmp/mibs +mibs +BRIDGE-MIB:RSTP-MIB:BEGEMOT-MIB:BEGEMOT-BRIDGE-MIB</programlisting> + + <para>To monitor a single bridge via the IETF BRIDGE-MIB + (RFC4188) do</para> + + <screen>&prompt.user; <userinput>snmpwalk -v 2c -c public bridge1.example.com mib-2.dot1dBridge</userinput> +BRIDGE-MIB::dot1dBaseBridgeAddress.0 = STRING: 66:fb:9b:6e:5c:44 +BRIDGE-MIB::dot1dBaseNumPorts.0 = INTEGER: 1 ports +BRIDGE-MIB::dot1dStpTimeSinceTopologyChange.0 = Timeticks: (189959) 0:31:39.59 centi-seconds +BRIDGE-MIB::dot1dStpTopChanges.0 = Counter32: 2 +BRIDGE-MIB::dot1dStpDesignatedRoot.0 = Hex-STRING: 80 00 00 01 02 4B D4 50 +... +BRIDGE-MIB::dot1dStpPortState.3 = INTEGER: forwarding(5) +BRIDGE-MIB::dot1dStpPortEnable.3 = INTEGER: enabled(1) +BRIDGE-MIB::dot1dStpPortPathCost.3 = INTEGER: 200000 +BRIDGE-MIB::dot1dStpPortDesignatedRoot.3 = Hex-STRING: 80 00 00 01 02 4B D4 50 +BRIDGE-MIB::dot1dStpPortDesignatedCost.3 = INTEGER: 0 +BRIDGE-MIB::dot1dStpPortDesignatedBridge.3 = Hex-STRING: 80 00 00 01 02 4B D4 50 +BRIDGE-MIB::dot1dStpPortDesignatedPort.3 = Hex-STRING: 03 80 +BRIDGE-MIB::dot1dStpPortForwardTransitions.3 = Counter32: 1 +RSTP-MIB::dot1dStpVersion.0 = INTEGER: rstp(2)</screen> + + <para>The <literal>dot1dStpTopChanges.0</literal> value is two + which means that the STP bridge topology has changed twice, + a topology change means that one or more links in the + network have changed or failed and a new tree has been + calculated. The + <literal>dot1dStpTimeSinceTopologyChange.0</literal> value + will show when this happened.</para> + + <para>To monitor multiple bridge interfaces one may use the + private BEGEMOT-BRIDGE-MIB:</para> + + <screen>&prompt.user; <userinput>snmpwalk -v 2c -c public bridge1.example.com</userinput> +enterprises.fokus.begemot.begemotBridge +BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge0" = STRING: bridge0 +BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge2" = STRING: bridge2 +BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge0" = STRING: e:ce:3b:5a:9e:13 +BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge2" = STRING: 12:5e:4d:74:d:fc +BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge0" = INTEGER: 1 +BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge2" = INTEGER: 1 +... +BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge0" = Timeticks: (116927) 0:19:29.27 centi-seconds +BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge2" = Timeticks: (82773) 0:13:47.73 centi-seconds +BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge0" = Counter32: 1 +BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge2" = Counter32: 1 +BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge0" = Hex-STRING: 80 00 00 40 95 30 5E 31 +BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge2" = Hex-STRING: 80 00 00 50 8B B8 C6 A9</screen> + + <para>To change the bridge interface being monitored via the + <literal>mib-2.dot1dBridge</literal> subtree do:</para> + + <screen>&prompt.user; <userinput>snmpset -v 2c -c private bridge1.example.com</userinput> +BEGEMOT-BRIDGE-MIB::begemotBridgeDefaultBridgeIf.0 s bridge2</screen> + </sect3> </sect2> </sect1> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml,v 1.226 2007/04/07 20:21:09 njl Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml,v 1.227 2007/08/17 12:54:31 blackend Exp $ --> <chapter id="config-tuning"> @@ -2391,13 +2391,13 @@ <para>To see the current number of vnodes in use:</para> - <programlisting>&prompt.root; sysctl vfs.numvnodes -vfs.numvnodes: 91349</programlisting> + <screen>&prompt.root; <userinput>sysctl vfs.numvnodes</userinput> +vfs.numvnodes: 91349</screen> <para>To see the maximum vnodes:</para> - <programlisting>&prompt.root; sysctl kern.maxvnodes -kern.maxvnodes: 100000</programlisting> + <screen>&prompt.root; <userinput>sysctl kern.maxvnodes</userinput> +kern.maxvnodes: 100000</screen> <para>If the current vnode usage is near the maximum, increasing <varname>kern.maxvnodes</varname> by a value of 1,000 is ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml,v 1.274 2007/06/15 12:41:54 den Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml,v 1.275 2007/08/20 16:48:01 blackend Exp $ --> <chapter id="disks"> @@ -3748,8 +3748,8 @@ provided. Arguments for this script can be passed via &man.rc.conf.5;, for example:</para> - <screen>gbde_autoattach_all="YES" -gbde_devices="ad4s1c"</screen> + <programlisting>gbde_autoattach_all="YES" +gbde_devices="ad4s1c"</programlisting> <para>This will require that the <application>gbde</application> passphrase be entered at boot time. After typing the correct @@ -3805,7 +3805,7 @@ <para>A new cryptographic GEOM class is available as of &os; 6.0 - <command>geli</command>. It is currently being developed by - &a.pjd;. <command>Geli</command> is different to + &a.pjd;. The <command>geli</command> utility is different to <command>gbde</command>; it offers different features and uses a different scheme for doing cryptographic work.</para> @@ -3851,9 +3851,7 @@ <para>The next steps will describe how to enable support for <command>geli</command> in the &os; kernel and will explain how - to create a new <command>geli</command> encryption provider. At - the end it will be demonstrated how to create an encrypted swap - partition using features provided by <command>geli</command>.</para> + to create and use a <command>geli</command> encryption provider.</para> <para>In order to use <command>geli</command>, you must be running &os; 6.0-RELEASE or later. Super-user privileges will be @@ -3861,14 +3859,13 @@ <procedure> <step> - <title>Adding <command>geli</command> Support to the Kernel - Configuration File</title> + <title>Adding <command>geli</command> Support to the Kernel</title> <para>Add the following lines to the kernel configuration file:</para> - <screen>options GEOM_ELI -device crypto</screen> + <programlisting>options GEOM_ELI +device crypto</programlisting> <para>Rebuild the kernel as described in <xref linkend="kernelconfig">.</para> @@ -3877,7 +3874,7 @@ be loaded at boot time. Add the following line to the <filename>/boot/loader.conf</filename>:</para> - <para><literal>geom_eli_load="YES"</literal></para> + <programlisting>geom_eli_load="YES"</programlisting> <para>&man.geli.8; should now be supported by the kernel.</para> </step> @@ -3943,7 +3940,7 @@ &prompt.root; <userinput>mount /dev/da2.eli /private</userinput></screen> <para>The encrypted file system should be visible to &man.df.1; - and be available for use now.</para> + and be available for use now:</para> <screen>&prompt.root; <userinput>df -H</userinput> Filesystem Size Used Avail Capacity Mounted on @@ -3981,8 +3978,8 @@ An example of configuring <command>geli</command> through &man.rc.conf.5; follows:</para> - <screen>geli_devices="da2" -geli_da2_flags="-p -k /root/da2.key"</screen> + <programlisting>geli_devices="da2" +geli_da2_flags="-p -k /root/da2.key"</programlisting> <para>This will configure <filename>/dev/da2</filename> as a <command>geli</command> provider of which the Master Key file @@ -4067,10 +4064,10 @@ <literal>.bde</literal> suffix should be added to the device in the respective <filename>/etc/fstab</filename> swap line:</para> - <screen> + <programlisting> # Device Mountpoint FStype Options Dump Pass# /dev/ad0s1b.bde none swap sw 0 0 - </screen> + </programlisting> <para>For systems prior to &os; 6.0-RELEASE, the following line in <filename>/etc/rc.conf</filename> is also needed:</para> @@ -4086,10 +4083,10 @@ <literal>.eli</literal> suffix should be added to the device in the respective <filename>/etc/fstab</filename> swap line:</para> - <screen> + <programlisting> # Device Mountpoint FStype Options Dump Pass# /dev/ad0s1b.eli none swap sw 0 0 - </screen> + </programlisting> <para>&man.geli.8; uses the <acronym>AES</acronym> algorithm with a key length of 256 bit by default.</para> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml#6 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.375 2007/08/11 13:59:20 blackend Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.380 2007/08/12 13:09:23 blackend Exp $ --> <chapter id="install"> @@ -104,9 +104,9 @@ linkend="install-floppies">.</para> <sect3> - <title>&i386; and pc98 Architectures</title> + <title>&os;/&arch.i386; and &os;/&arch.pc98;</title> - <para>Both &os;/&i386 and &os;/pc98 versions require a 486 or + <para>Both &os;/&arch.i386; and &os;/&arch.pc98; require a 486 or better processor and at least 24 MB of RAM. You will need at least 150 MB of free hard drive space for the most minimal installation.</para> @@ -119,11 +119,11 @@ </sect3> <sect3> - <title>Alpha Architecture</title> + <title>&os;/&arch.alpha;</title> <indexterm><primary>Alpha</primary></indexterm> - <para>To install &os;/alpha, you will need a supported + <para>To install &os;/&arch.alpha;, you will need a supported platform (see <xref linkend="install-hardware-supported">) and a dedicated disk for &os;. It is not possible to share a disk with another operating system at this time. This @@ -140,14 +140,32 @@ AlphaBIOS (or ARC) firmware and SRM. In others it will be necessary to download new firmware from the vendor's Web site.</para> + + <note> + <para>Support for the Alpha was removed beginning with + &os; 7.0. The + &os; 6.<replaceable>X</replaceable> series of + releases is the last containing support for this + architecture.</para> + </note> + </sect3> <sect3> - <title>amd64 Architecture</title> + <title>&os;/&arch.amd64; Architecture</title> + + <para>There are two classes of processors capable of running + &os;/&arch.amd64;. The first are AMD64 processors, + including the &amd.athlon;64, + &amd.athlon;64-FX, &amd.opteron; or better + processors.</para> - <para>&os;/amd64 requires an &amd.athlon;64, - &amd.athlon;64-FX, &amd.opteron; or better processor to - run.</para> + <para>The second class of processors that can use + &os;/&arch.amd64; includes those using the &intel; EM64T + architecture. Examples of these processors include the + &intel; &core; 2 Duo, Quad, and Extreme processor + families and the &intel; &xeon; 3000, 5000, and 7000 + sequences of processors.</para> <para>If you have a machine based on an nVidia nForce3 Pro-150, you <emphasis>must</emphasis> use the BIOS setup to @@ -158,13 +176,13 @@ </sect3> <sect3> - <title>&sparc64; Architecture</title> + <title>&os;/&arch.sparc64;</title> - <para>To install &os;/&sparc64;, you will need a supported + <para>To install &os;/&arch.sparc64;, you will need a supported platform (see <xref linkend="install-hardware-supported">).</para> - <para>You will need a dedicated disk for &os;/&sparc64;. It + <para>You will need a dedicated disk for &os;/&arch.sparc64;. It is not possible to share a disk with another operating system at this time.</para> </sect3> @@ -330,7 +348,7 @@ laid out on the disk, and how this affects you.</para> <sect3 id="install-where-i386"> - <title>Disk Layouts for the &i386;</title> + <title>Disk Layouts for &os;/&arch.i386;</title> <para>A PC disk can be divided into discrete chunks. These chunks are called <firstterm>partitions</firstterm>. Since @@ -686,7 +704,7 @@ with the architecture and the version number which you want to install, respectively. For example, the boot floppy images for - &os; &rel.current;-RELEASE for &i386; are available + &os;/&arch.i386; &rel.current;-RELEASE are available from <ulink url="ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/i386/&rel.current;-RELEASE/floppies/"></ulink>.</para> <para>The floppy images have a <filename>.flp</filename> extension. @@ -3143,264 +3161,6 @@ post-installation configuration.</para> </sect2> - <sect2 id="network-services"> - <sect2info> - <authorgroup> - <author> - <firstname>Tom</firstname> - <surname>Rhodes</surname> - <contrib>Contributed by </contrib> - </author> - </authorgroup> - </sect2info> - <title>Configure Additional Network Services</title> - - <para>Configuring network services can be a daunting - task for new users if they lack previous - knowledge in this area. Networking, including the Internet, - is critical to all modern operating systems including &os;; - as a result, it is very useful to have some understanding - &os;'s extensive networking capabilities. Doing this - during the installation will ensure users have some - understanding of the various services available to them.</para> - - <para>Network services are programs that accept input from - anywhere on the network. Every effort is made to make sure - these programs will not do anything <quote>harmful</quote>. - Unfortunately, programmers are not perfect and through time - there have been cases where bugs in network services have been - exploited by attackers to do bad things. It is important that - you only enable the network services you know that you need. If - in doubt it is best if you do not enable a network service until - you find out that you do need it. You can always enable it - later by re-running <application>sysinstall</application> or by - using the features provided by the - <filename>/etc/rc.conf</filename> file.</para> - - <para>Selecting the <guimenu>Networking</guimenu> option will display - a menu similar to the one below:</para> - - <figure id="network-configuration"> - <title>Network Configuration Upper-level</title> - - <mediaobject> - <imageobject> - <imagedata fileref="install/net-config-menu1" format="PNG"> - </imageobject> - </mediaobject> - </figure> - - <para>The first option, <guimenuitem>Interfaces</guimenuitem>, was previously covered during - the <xref linkend="inst-network-dev">, thus this option can - safely be ignored.</para> - - <para>Selecting the <guimenuitem>AMD</guimenuitem> option adds - support for the <acronym>BSD</acronym> automatic mount utility. - This is usually used in conjunction with the - <acronym>NFS</acronym> protocol (see below) - for automatically mounting remote file systems. - No special configuration is required here.</para> - - <para>Next in line is the <guimenuitem>AMD Flags</guimenuitem> - option. When selected, a menu will pop up for you - to enter specific <acronym>AMD</acronym> flags. - The menu already contains a set of default options:</para> - - <screen>-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map</screen> - - <para>The <option>-a</option> option sets the default mount - location which is specified here as - <filename>/.amd_mnt</filename>. The <option>-l</option> - option specifies the default <filename>log</filename> file; - however, when <literal>syslogd</literal> is used all log - activity will be sent to the system log daemon. The - <filename class="directory">/host</filename> directory is used - to mount an exported file system from a remote - host, while <filename class="directory">/net</filename> - directory is used to mount an exported file system from an - <acronym>IP</acronym> address. The - <filename>/etc/amd.map</filename> file defines the default - options for <acronym>AMD</acronym> exports.</para> - - <indexterm> - <primary>FTP</primary> - <secondary>anonymous</secondary> - </indexterm> - - <para>The <guimenuitem>Anon FTP</guimenuitem> option permits anonymous - <acronym>FTP</acronym> connections. Select this option to - make this machine an anonymous <acronym>FTP</acronym> server. - Be aware of the security risks involved with this option. - Another menu will be displayed to explain the security risks - and configuration in depth.</para> - - <para>The <guimenuitem>Gateway</guimenuitem> configuration menu will set - the machine up to be a gateway as explained previously. This - can be used to unset the <guimenuitem>Gateway</guimenuitem> option if you accidentally - selected it during the installation process.</para> - - <para>The <guimenuitem>Inetd</guimenuitem> option can be used to configure - or completely disable the &man.inetd.8; daemon as discussed - above.</para> - - <para>The <guimenuitem>Mail</guimenuitem> option is used to configure the system's - default <acronym>MTA</acronym> or Mail Transfer Agent. - Selecting this option will bring up the following menu:</para> - - <figure id="mta-selection"> - <title>Select a default MTA</title> - - <mediaobject> - <imageobject> - <imagedata fileref="install/mta-main" format="PNG"> - </imageobject> - </mediaobject> - </figure> - - <para>Here you are offered a choice as to which - <acronym>MTA</acronym> to install - and set as the default. An <acronym>MTA</acronym> is nothing - more than a mail server which delivers email to users on the - system or the Internet.</para> - - <para>Selecting <guimenuitem>Sendmail</guimenuitem> will install - the popular <application>sendmail</application> server which - is the &os; default. The <guimenuitem>Sendmail local</guimenuitem> option - will set <application>sendmail</application> to be the default - <acronym>MTA</acronym>, but disable its ability to receive - incoming email from the Internet. The other options here, - <guimenuitem>Postfix</guimenuitem> and - <guimenuitem>Exim</guimenuitem> act similar to - <guimenuitem>Sendmail</guimenuitem>. They both deliver - email; however, some users prefer these alternatives to the - <application>sendmail</application> - <acronym>MTA</acronym>.</para> - - <para>After selecting an <acronym>MTA</acronym>, or choosing - not to select an MTA, the network configuration menu will appear - with the next option being <guimenuitem>NFS client</guimenuitem>.</para> - - <para>The <guimenuitem>NFS client</guimenuitem> option will - configure the system to communicate with a server via - <acronym>NFS</acronym>. An <acronym>NFS</acronym> server - makes file systems available to other machines on the - network via the <acronym>NFS</acronym> protocol. If this is - a stand-alone machine, this option can remain unselected. - The system may require more configuration later; see - <xref linkend="network-nfs"> for more - information about client and server configuration.</para> - - <para>Below that option is the <guimenuitem>NFS server</guimenuitem> - option, permitting you to set the system up as an - <acronym>NFS</acronym> server. This adds the required - information to start up the <acronym>RPC</acronym> remote - procedure call services. <acronym>RPC</acronym> is used to - coordinate connections between hosts and programs.</para> - - <para>Next in line is the <guimenuitem>Ntpdate</guimenuitem> option, - which deals with time synchronization. When selected, a menu - like the one below shows up:</para> - - <figure id="Ntpdate-config"> - <title>Ntpdate Configuration</title> - - <mediaobject> - <imageobject> - <imagedata fileref="install/ntp-config" format="PNG"> - </imageobject> - </mediaobject> - </figure> - - <para>From this menu, select the server which is the closest - to your location. Selecting a close one will make the time - synchronization more accurate as a server further from your - location may have more connection latency.</para> - - <para>The next option is the <acronym>PCNFSD</acronym> selection. - This option will install the - <filename role="package">net/pcnfsd</filename> package from - the Ports Collection. This is a useful utility which provides - <acronym>NFS</acronym> authentication services for systems which - are unable to provide their own, such as Microsoft's - &ms-dos; operating system.</para> - - <para>Now you must scroll down a bit to see the other - options:</para> - - <figure id="Network-configuration-cont"> - <title>Network Configuration Lower-level</title> - - <mediaobject> - <imageobject> - <imagedata fileref="install/net-config-menu2" format="PNG"> - </imageobject> - </mediaobject> - </figure> - - <para>The &man.rpcbind.8;, &man.rpc.statd.8;, and - &man.rpc.lockd.8; utilities are all used for Remote Procedure - Calls (<acronym>RPC</acronym>). - The <command>rpcbind</command> utility manages communication - between <acronym>NFS</acronym> servers and clients, and is - required for <acronym>NFS</acronym> servers to operate - correctly. The <application>rpc.statd</application> daemon interacts - with the <application>rpc.statd</application> daemon on other hosts to - provide status monitoring. The reported status is usually held - in the <filename>/var/db/statd.status</filename> file. The - next option listed here is the <guimenuitem>rpc.lockd</guimenuitem> - option, which, when selected, will provide file locking - services. This is usually used with - <application>rpc.statd</application> to monitor what hosts are - requesting locks and how frequently they request them. - While these last two options are marvelous for debugging, they - are not required for <acronym>NFS</acronym> servers and clients - to operate correctly.</para> - - <para>As you progress down the list the next item here is - <guimenuitem>Routed</guimenuitem>, which is the routing daemon. The - &man.routed.8; utility manages network routing tables, - discovers multicast routers, and supplies a copy of the routing - tables to any physically connected host on the network upon - request. This is mainly used for machines which act as a - gateway for the local network. When selected, a menu will be - presented requesting the default location of the utility. - The default location is already defined for you and can be - selected with the <keycap>Enter</keycap> key. You will then - be presented with yet another menu, this time asking for the - flags you wish to pass on to <application>routed</application>. The - default is <option>-q</option> and it should already appear - on the screen.</para> - - <para>Next in line is the <guimenuitem>Rwhod</guimenuitem> option which, - when selected, will start the &man.rwhod.8; daemon - during system initialization. The <command>rwhod</command> - utility broadcasts system messages across the network - periodically, or collects them when in <quote>consumer</quote> - mode. More information can be found in the &man.ruptime.1; and - &man.rwho.1; manual pages.</para> - - <para>The next to the last option in the list is for the - &man.sshd.8; daemon. This is the secure shell server for - <application>OpenSSH</application> and it is highly recommended - over the standard <application>telnet</application> and - <acronym>FTP</acronym> servers. The <application>sshd</application> - server is used to create a secure connection from one host to - another by using encrypted connections.</para> - - <para>Finally there is the <guimenuitem>TCP Extensions</guimenuitem> - option. This enables the <acronym>TCP</acronym> Extensions - defined in <acronym>RFC</acronym> 1323 and - <acronym>RFC</acronym> 1644. While on many hosts this can - speed up connections, it can also cause some connections to be - dropped. It is not recommended for servers, but may be - beneficial for stand alone machines.</para> - - <para>Now that you have configured the network services, you can - scroll up to the very top item which is <guimenuitem>Exit</guimenuitem> - and continue on to the next configuration section.</para> - - </sect2> - >>> TRUNCATED FOR MAIL (1000 lines) <<<
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200708210159.l7L1xL0G029581>