Date: Fri, 02 Mar 2012 22:26:54 +1000 From: Da Rock <freebsd-questions@herveybayaustralia.com.au> To: freebsd-questions@freebsd.org Subject: Re: USB Logitech QuickCam Ultra Vision Message-ID: <4F50BC8E.207@herveybayaustralia.com.au> In-Reply-To: <4F50BA9F.3040502@myfairpoint.net> References: <4F4FDB25.5020400@myfairpoint.net> <4F50139F.6050203@herveybayaustralia.com.au> <4F50BA9F.3040502@myfairpoint.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/02/12 22:18, sean wrote: > On 03/01/12 19:26, Da Rock wrote: >> Which mixer? Check `ls /dev/mixer*`, and use `mixer -f >> /dev/mixer<whatever numbers show up in previous cmd`. > > I did not realize there was more than one mixer. > Anyway, here are my results to the commands above. > tardis# ls /dev/mixer* > /dev/mixer0 /dev/mixer1 > tardis# mixer > Mixer vol is currently set to 91:91 > Mixer pcm is currently set to 97:97 > Mixer line is currently set to 75:75 > Mixer mic is currently set to 97:97 > Mixer cd is currently set to 91:91 > Mixer rec is currently set to 100:100 > Mixer igain is currently set to 0:0 > Mixer ogain is currently set to 50:50 > Mixer line1 is currently set to 75:75 > Mixer phin is currently set to 0:0 > Mixer phout is currently set to 0:0 > Recording source: mic > tardis# mixer1 > mixer1: Command not found. > tardis# mixer -f /dev/mixer > Mixer vol is currently set to 91:91 > Mixer pcm is currently set to 97:97 > Mixer line is currently set to 75:75 > Mixer mic is currently set to 97:97 > Mixer cd is currently set to 91:91 > Mixer rec is currently set to 100:100 > Mixer igain is currently set to 0:0 > Mixer ogain is currently set to 50:50 > Mixer line1 is currently set to 75:75 > Mixer phin is currently set to 0:0 > Mixer phout is currently set to 0:0 > Recording source: mic Somehow I think you've misunderstood what I said. Just post the output of `mixer -f /dev/mixer1`. I think you will find your answer there. The default mixer (/dev/mixer0) is your soundcard, and this will be the basis of `mixer` and `mixer -f /dev/mixer`; the other will probably be the webcam audio ports- to verify this, it will only show recording tunables. You can adjust the levels similarly, and you should be able to get a result from that.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F50BC8E.207>