Date: Sat, 25 Dec 1999 08:52:45 -0500 (EST) From: patrick@whetstonelogic.com To: bleez@netaxs.com Cc: freebsd-current@FreeBSD.ORG, msmith@FreeBSD.ORG Subject: Re: pcm/sbc and Avance Logic ALS-120 Message-ID: <199912251352.IAA05520@p.wl.vg> In-Reply-To: <Pine.BSF.4.20.9912241226130.19515-100000@gravy.kishka.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On 24 Dec, Bryan Liesner wrote:
> On Fri, 24 Dec 1999 patrick@whetstonelogic.com wrote:
>
> <>unknown0: <PnP Sound Chip> at port 0x220-0x22f irq 5 drq 1,0 on isa0
> <>sbc0: <Avance Logic ALS120> at port 0x388-0x38f on isa0
> <>sbc0: alloc_resource
> <>device_probe_and_attach: sbc0 attach returned 6
> <>unknown1: <PnP Sound Chip> at port 0x208-0x20f on isa0
> <>unknown2: <PnP Sound Chip> at port 0x330-0x331 irq 9 on isa0
>
> Try this patch. I had the exact problem with my ALS 110, and I
> submitted a patch fixing an error in the device number. I suspect
> that all of the ALS devices end with 0, not 1. I didn't want to
> submit it with the ALS 120 fix because I couldn't test it.
>
> --- /usr/src/sys/dev/sound/isa/sbc.c Tue Dec 21 20:38:03 1999
> +++ sbc.c Fri Dec 24 12:24:59 1999
> @@ -200,13 +200,13 @@
> {0x42008c0e, "Creative SB AWE64"}, /* CTL0042 */
> {0x43008c0e, "Creative ViBRA16X"}, /* CTL0043 */
> {0x44008c0e, "Creative SB AWE64 Gold"}, /* CTL0044 */
> {0x45008c0e, "Creative SB AWE64"}, /* CTL0045 */
>
> {0x01100000, "Avance Asound 110"}, /* @@@1001 */
> - {0x01200001, "Avance Logic ALS120"}, /* @@@2001 */
> + {0x01200000, "Avance Logic ALS120"}, /* @@@2001 */
>
> {0x68187316, "ESS ES1868"}, /* ESS1868 */
> {0x69187316, "ESS ES1869"}, /* ESS1869 */
> {0xacb0110e, "ESS ES1869 (Compaq OEM)"}, /* CPQb0ac */
> {0x79187316, "ESS ES1879"}, /* ESS1879 */
> {0x88187316, "ESS ES1888"}, /* ESS1888 */
>
This patch works so that the kernel detects it properly.
sbc0: setting card to irq 5, drq 1, 0
pcm0: <SB DSP 4.02> on sbc0
unknown0: <PnP Sound Chip> at port 0x388-0x38f on isa0
unknown1: <PnP Sound Chip> at port 0x208-0x20f on isa0
unknown2: <PnP Sound Chip> at port 0x330-0x331 irq 9 on isa0
However any attempt to play a .wav file (using waveplay or splay), I
get:
p:patrick# waveplay /usr/local/share/sounds/KDE_Startup.wav
File name : /usr/local/share/sounds/KDE_Startup.wav
Sampling rate : 22050 Hz
Bits/Sample : 16 Bits
Channels : 1
Size : 362456 Bytes
openDSP: Device not configured
(I couldn't find the device to create in /dev except for /dev/snd0 and
/dev/snd1, so that is what I made.)
cat /dev/sndstat gives me:
p:root# cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Dec 24 1999 08:03:11
Installed devices:
pcm0: <SB DSP 4.02> at io 0x220 irq 5 drq 1:0 (1/1 channels duplex)
Patrick
The pnpinfo dump is attached.
[-- Attachment #2 --]
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ALS0120 (0x20019305), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 0
Device Description: PnP Sound Chip
Logical Device ID: @@@2001 0x01200000 #0
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x220 .. 0x220, alignment 0x10, len 0x10
[16-bit addr]
IRQ: 5 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 3
8-bit, not a bus master, count by byte, , Type F
TAG Start DF
Acceptable Configuration
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
IRQ: 5 7 9 10 11 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
TAG Start DF
Sub-optimal Configuration
I/O Range 0x100 .. 0x3f0, alignment 0x10, len 0x10
[16-bit addr]
IRQ: 5 7 9 10 11 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
TAG End DF
Logical Device ID: @H@2001 0x01200001 #1
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x300 .. 0x7ff, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: @P@2001 0x01200002 #2
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x200 .. 0x7ff, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: @X@2001 0x01200003 #3
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x330 .. 0x330, alignment 0x2, len 0x2
[16-bit addr]
IRQ: 9 - only one type (true/edge)
TAG Start DF
Acceptable Configuration
I/O Range 0x300 .. 0x3f0, alignment 0x10, len 0x2
[16-bit addr]
IRQ: 5 7 9 10 11 - only one type (true/edge)
TAG End DF
End Tag
Successfully got 38 resources, 4 logical fdevs
-- card select # 0x0001
CSN ALS0120 (0x20019305), Serial Number 0xffffffff
Logical device #0
IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220
IRQ 5 0
DMA 1 0
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 9 0
DMA 4 4
IO range check 0x00 activate 0x01
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912251352.IAA05520>