Date: Fri, 2 Oct 2009 14:30:00 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-current@freebsd.org Cc: Marten Vijn <info@martenvijn.nl> Subject: Re: 8.0RC1: Can't mount usb stick Message-ID: <200910021430.01344.hselasky@c2i.net> In-Reply-To: <1254483586.14766.1.camel@polaris> References: <alpine.LRH.2.00.0910021023190.19560@afrodita.rcub.bg.ac.rs> <1254483586.14766.1.camel@polaris>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 02 October 2009 13:39:46 Marten Vijn wrote: > On Fri, 2009-10-02 at 10:25 +0200, Goran Gajic wrote: > > Same here: > > > > ugen2.2: <vendor 0x1005> at usbus2 (disconnected) > > umass0: at uhub2, port 5, addr 2 (disconnected) > > (da0:umass-sim0:0:0:0): lost device > > (da0:umass-sim0:0:0:0): removing device entry > > ugen2.2: <vendor 0x1005> at usbus2 > > umass0: <vendor 0x1005 USB FLASH DRIVE, class 0/0, rev 2.00/1.10, addr 2> > > on usbus2 > > umass0: SCSI over Bulk-Only; quirks = 0x0000 > > umass0:1:0:-1: Attached to scbus1 > > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > > (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have > > changed > > (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: < USB FLASH DRIVE PMAP> Removable Direct Access SCSI-0 device > > da0: 40.000MB/s transfers > > da0: 1968MB (4030464 512 byte sectors: 255H 63S/T 250C) > > > > # mount -t msdosfs /dev/da0 /mnt > > mount_msdosfs: /dev/da0: Invalid argument > > _and_ booting 8.0RC-1 from a ubs-stick results in a panic..... > Can you try this patch: http://perforce.freebsd.org/chv.cgi?CH=169085 --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200910021430.01344.hselasky>