Date: Fri, 5 Mar 1999 14:24:23 -0600 (CST) From: Steve Price <sprice@hiwaay.net> To: =?X-UNKNOWN?Q?S=F8ren_Schmidt?= <sos@freebsd.dk> Cc: current@FreeBSD.ORG Subject: Re: UPDATE2: ATA/ATAPI driver new version available. Message-ID: <Pine.OSF.4.02.9903051421330.21431-100000@fly.HiWAAY.net> In-Reply-To: <199903051913.UAA92478@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 5 Mar 1999, S=F8ren Schmidt wrote:
# It seems Steve Price wrote:
#=20
# >This works a little better on my machine. It doesn't panic
# >anymore more. It just hangs where it used to panic. Should
# >I turn on the DEBUG output, hand scribe the output, and send
# >it to you?
#=20
# That would be very helpfull yes...
Ok here goes. This is with ACD_DEBUG, AD_DEBUG, ATA_DEBUG,
and ATAPI_DEBUG defined.
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
=09The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #84: Fri Mar 5 12:04:49 CST 1999
steve@zeus.hiwaay.net:/usr/src/sys/compile/zeus
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (300.00-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x652 Stepping=3D2
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 134217728 (131072K bytes)
avail memory =3D 127909888 (124912K bytes)
Preloaded elf kernel "kernel" at 0xf029f000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <PCI to CardBus bridge (vendor=3D104c device=3Dac17)> rev 0x02 int a=
irq 255 on pci0.4.0
chip3: <PCI to CardBus bridge (vendor=3D104c device=3Dac17)> rev 0x02 int b=
irq 255 on pci0.4.1
chip4: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ata-pci0: <Intel PIIX4 IDE controller> rev 0x01 on pci0.7.1
ata: type=3D7118086 class=3D01018001 cmd=3D02800005
ata0: iobase=3D0x01f0 altiobase=3D0x03f6
ata0: mask=3D03 status0=3D50 status1=3D00
ata0: mask=3D03 status0=3D50 status1=3D00
ata0: devices =3D 0x1
ata0 at 0x01f0 irq 14 on ata-pci0
ata1: iobase=3D0x0170 altiobase=3D0x0376
ata1: mask=3D03 status0=3D50 status1=3D00
ata1: mask=3D03 status0=3D50 status1=3D00
ata1: devices =3D 0xc
ata1 at 0x0170 irq 15 on ata-pci0
chip5: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
Probing for devices on PCI bus 1:
vga0: <ATI model 4c42 graphics accelerator> rev 0xdc int a irq 11 on pci1.0=
=2E0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=3D0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ata-isa1: already registered as ata0
ata1 not found at 0x1f0
ata-isa2: already registered as ata1
ata2 not found at 0x170
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ep0 not found at 0x300
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
pcic: controller irq 3
Initializing PC-card drivers: ep
ataintr: entered unit=3D0
ataintr: entered unit=3D0
ad0: <IBM-DYLA-28100/YSA0A22H> ATA-3 disk at ata0 as master
ad0: 7815MB (16007040 sectors), 15880 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/in, 0 depth queue
ataintr: entered unit=3D1
atapi: queued MODE_SENSE cmd
ata_start: entered
atapi: trying to start MODE_SENSE cmd
ataintr: entered unit=3D1
atapi_interrupt: enter
atapi_interrupt: length=3D28 reason=3D0x0a
ataintr: entered unit=3D1
atapi_interrupt: enter
atapi_interrupt: length=3D28 reason=3D0x03
atapi_interrupt: error=3D0x00
ata_start: entered
atapi: phew, got back from tsleep
atapi: acd: mode sense 0-20-70-00-00-00-00-00-2a-18-1b-00-71-77-29-23-0d-c=
8-00-10-00-80-0d-c8-00-18-00-00
acd0: <TOSHIBA DVD-ROM SD-C2102/1029> CDROM drive at ata1 as master
acd0: drive speed 3445KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Card inserted, slot 0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.4.02.9903051421330.21431-100000>