Date: Sat, 19 Feb 2005 23:22:27 +0100 From: Juergen Dankoweit <Juergen.Dankoweit@T-Online.de> To: FreeBSD-Stable <freebsd-stable@freebsd.org> Subject: Several problems with 5.3 STABLE Message-ID: <1108851747.2998.16.camel@primergy470.juergendankoweit.net>
next in thread | raw e-mail | index | archive | help
Hello and good evening. Today I made an update of my FreeBSD-System with cvs as discribed in the manual. After this procedure I made some ugly experiences: (*) Using my compact-flash-reader (Siemens-Fujtsu) shows strange results: # mount -t msdos /dev/da14s1 /dist Result: ======= Feb 19 22:56:01 primergy470 kernel: umass0: Get Max Lun not supported (STALLED) Feb 19 22:56:01 primergy470 kernel: da14 at umass-sim0 bus 0 target 0 lun 0 Feb 19 22:56:01 primergy470 kernel: da14: < > Removable Direct Access SCSI-2 device Feb 19 22:56:01 primergy470 kernel: da14: 1.000MB/s transfers Feb 19 22:56:01 primergy470 kernel: da14: 122MB (250369 512 byte sectors: 64H 32S/T 122C) # umount /dist Result: ======= Feb 19 22:57:55 primergy470 kernel: umass0: BBB reset failed, TIMEOUT Feb 19 22:57:55 primergy470 kernel: umass0: BBB bulk-in clear stall failed, STALLED Feb 19 22:57:55 primergy470 kernel: umass0: BBB bulk-out clear stall failed, STALLED This was shown in /var/log/messages about twenty times (*) Connecting my DigiKam (Canon Powershot G2) and identifying it is no problem: it is shown as ugen0-device. But when gphoto2 is started (gphoto2 --auto-detect -P) the system hangs and after two minutes it reboots. (*) X.ORG 6.8.1 needs about 20% of CPU-capacity, with only one(!!!!) open Gnome-Terminal. Before system update it was only 5% (under FreeBSD 4.10 it needs 1%, it is a P2-266MHz notebook!!!!) (*) mplayer core dumps with signal 11 (*) opening windows on Gnome-Desktop is very slow and needs about 10 seconds. Here is the output from uname -a FreeBSD primergy470.juergendankoweit.net 5.3-STABLE FreeBSD 5.3-STABLE #1: Sat Feb 19 18:19:23 CET 2005 juergen@primergy470.juergendankoweit.net:/usr/obj/usr/src/sys/PRIMERGY470 i386 It is a dual processor machine with 2 x 450MHz P3 and 2GB RAM. What is wrong with the new update? Is it better to change to FBSD 4.11? Many thanks for your advice. Best regards Jürgen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1108851747.2998.16.camel>