Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Jun 2002 13:23:50 -0500
From:      John Prince <johnp@lodgenet.com>
To:        bmah@FreeBSD.ORG
Cc:        John Prince <johnp@lodgenet.com>, bmah@FreeBSD.ORG, Doug Barton <DougB@FreeBSD.ORG>, stable@FreeBSD.ORG
Subject:   Re: RFC: Errata on CDROM installs (was Re: ATA Atapi 4.6 Release) 
Message-ID:  <5.1.0.14.2.20020619131843.02430b00@popmail.ct.lodgenet.com>
In-Reply-To: <200206191615.g5JGFRxr044868@intruder.bmah.org>
References:  <5.1.0.14.2.20020619083035.024232f8@popmail.ct.lodgenet.com> <20020617213853.Y4899-100000@master.gorean.org> <20020617213853.Y4899-100000@master.gorean.org> <5.1.0.14.2.20020619083035.024232f8@popmail.ct.lodgenet.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Bruce..
your right..  bleah....
I just completed a make release, the iso works on the 40x.
The 50x and 52x both return the same error with dma enabled,
With DMA disabled, it hangs extracting the bin distribution.

I cvsup'ed at 9:30 this morning.
We are going to go "Digging..." ;)

Thanks for you help...
--john


At 09:15 AM 6/19/2002 -0700, Bruce A. Mah wrote:
>If memory serves me right, John Prince wrote:
> > Hello Bruce..
> > While this worked on a 40x
>
>OK, that's good.
>
> > I tried 4 different 52x cdroms and 2 50x cdroms that did not
> > work.  Both speeds were AOpen drives.
> > Error during Install:
> >          ACD0: READ_BIG - HARDWARE ERROR asc=0x08 asq=0x03 error=0x00
> > The cdrom works fine with same drive(s) on 4.5_release.
>
>That's not so good.  Bleah.
>
> > I will try a couple other drives that did not work (mitsumi and toshiba)
>
>I have one report by private email where a "Mitsumi Slim CRMC-SR242S"
>was able to be used for a CD-ROM install with this procedure.
>
>I'm tempted to tweak the errata just a little bit and commit it in
>essentially the form that it's in.  We can refine it later if needed.
>
>Thanks for testing this...much appreciated.
>
>Bruce.
>
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.2.20020619131843.02430b00>