Date: Wed, 3 May 2006 22:39:04 GMT From: Stefan Rink <paradise@ml75.nl> To: freebsd-gnats-submit@FreeBSD.org Subject: threads/96739: X11 crashes the whole system when switching to console. Message-ID: <200605032239.k43Md4rA045561@www.freebsd.org> Resent-Message-ID: <200605032240.k43MeJrM002776@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 96739
>Category: threads
>Synopsis: X11 crashes the whole system when switching to console.
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-threads
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed May 03 22:40:19 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Stefan Rink
>Release: 6.0
>Organization:
ML75.NL
>Environment:
FreeBSD LappieBSD 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386
>Description:
Most of the time when i to switch from X11 to the console my laptop completely crashes (ie screen goes black and my cooler goes awall) (Probably a CPU Loop). (using NVIDEA driver from the ports)
Also most of the time my keyboard doesn't work in X11 an i can only use CTRL-ALT-DELETE to safely reboot my laptop; even CTRL-ALT-BACKSPACE doesn't work somehow. (KDE not recieving keyboard events?) (or use the mouse to press shutdown)
It just took me 7 reboots to get my FreeBSD running. :(
This is on a Dell Inspiron 5150 with a P4 3.2Ghz HT CPU.
My other PC is a Dell Precision 530 with a dual Xeon 2.4. (removed/quit trying FreeBSD on it because it is to unstable, it crashes like every 10 minutes)
----- DMESG
dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <DELL CPi R >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz (3189.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
Hyperthreading: 2 logical CPUs
real memory = 536670208 (511 MB)
avail memory = 511639552 (487 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX Go5200> mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff irq 20 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 17 at device 1.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:0d:56:b2:92:b2
cbb0: <TI4510 PCI-CardBus Bridge> at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xfaffd800-0xfaffdfff,0xfaff8000-0xfaffbfff irq 16 at device 4.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 38:4f:c0:00:0f:d6:78:10
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 3a:4f:c0:d6:78:10
fwe0: Ethernet address: 3a:4f:c0:d6:78:10
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
speaker0: <PC speaker> port 0x61,0x63,0x65,0x67 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3189387804 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <NEC DVD+RW ND-5100A/10AC> at ata0-master UDMA33
ad2: 57231MB <IC25N060ATMR04 0 MO3OAD0A> at ata1-master UDMA100
Trying to mount root from ufs:/dev/ad2s2a
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ath0: <Atheros 5212> mem 0xf6010000-0xf601ffff irq 16 at device 0.0 on cardbus0
ath0: Ethernet address: 00:0e:6a:d6:ec:c3
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: link state changed to UP
>How-To-Repeat:
I'm still working on this;
The X11 crash could be thread related; it seems to happen often when the laptop is really busy (ie still booting KDE when i press CTRL-ALT-F1).
* Hyperthreading problem? I always seem to have these problems on HT CPU's and disable this most of the time. (because this laptop also runs Windows XP and i thought FreeBSD 6 finaly fixed the HT bugs i've enabled it again)
* ACPI? Dell seems to have a problem writing good APIC code; FreeBSD doesn't run on my Dell XEON for more then 10 minutes without crashing while Windows XP runs like a charm).
* Broadcom ethernet adaptor problem? FreeBSD 5 crashed more often when using the onboard network interface. (currently disabled)
More i don't know.. i get no panics so i don't get any info about the problem.
>Fix:
No idea.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200605032239.k43Md4rA045561>