Date: Wed, 7 Oct 1998 09:29:37 +0800 From: Craig Beasland <craig@hotmix.com.au> To: <freebsd-questions@FreeBSD.ORG> Subject: PPP Problems Message-ID: <000901bdf191$b4883820$0a1e21cb@superbruce.hotmix.com.au>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_000A_01BDF1D4.C2ACFEC0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi there, I am having a problem with connecting to my ISP using userland ppp. My story: I have been using a dialup modem connection 28.8 using userland ppp and scripted logins, no problem. I then upgraded to 64K ISDN using an external T/A (ISDN Modem) and at the same time converted over to CHAP authentication. After some fiddling I got that to work for about 4 months. Now I want to upgrade to 128K ISDN. My provider tells me that I need multilink PPP. No problem I upgraded my version from 0.94 1997/05/10 to the newest version 2.0 1998/08/29. My problem: Before I installed the new version of ppp I took a copy of the old ppp program so that I wouldn't get stuck. If I dial using the old copy origppp -ddial myisp - everything works fine (except fore rror messages for the new log commands. Using the new ppp and I cannot authenticate myself. ppp -ddial myisp dials, connects and fails to authenticate. I have included the relevant (I hope) bits of the log file. Also: My understanding was the the T/A would handle the multilink ppp part and userland ppp would deal with it. Apparently not, so any thoughts on multilink ppp using v2 of the ppp program and an external T/A. I am dialling into a cisco router and I am using a Crusader modem (the same as the bit surfer pro from what I understand). Thanks for any help Cheers Craig ------=_NextPart_000_000A_01BDF1D4.C2ACFEC0 Content-Type: application/octet-stream; name="ppp.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="ppp.log" Oct 7 09:16:55 kryten ppp[6309]: tun0: Command: /dev/tty: dial=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Phase: bundle: Establish=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Phase: deflink: closed -> = opening=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Phase: deflink: Connected!=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Phase: deflink: opening -> dial=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Phase: Phone: 0892655301=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: deflink: Dial attempt 1 of = 1=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: Send: ATZ0^M=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: Expect(4): OK=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: Received: ATZ0^M^M=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: Received: OK^M=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: Send: = AT*B0=3D1*B1=3D0*p5=3D230400D0892655301^M=20 Oct 7 09:16:55 kryten ppp[6309]: tun0: Chat: Expect(60): CONNECT=20 Oct 7 09:16:57 kryten ppp[6309]: tun0: Chat: Received: = AT*B0=3D1*B1=3D0*p5=3D230400D0892655301^M^M=20 Oct 7 09:16:57 kryten ppp[6309]: tun0: Chat: Received: CONNECT 230400^M = Oct 7 09:16:57 kryten ppp[6309]: tun0: Phase: deflink: dial -> login=20 Oct 7 09:16:57 kryten ppp[6309]: tun0: Phase: deflink: login -> lcp=20 Oct 7 09:16:57 kryten ppp[6309]: tun0: LCP: FSM: Using "deflink" as a = transport=20 Oct 7 09:16:57 kryten ppp[6309]: tun0: LCP: deflink: State change = Initial --> Closed=20 Oct 7 09:16:57 kryten ppp[6309]: tun0: LCP: deflink: State change = Closed --> Stopped=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: LayerStart=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: SendConfigReq(1) = state =3D Stopped=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ACFCOMP[2]=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: PROTOCOMP[2]=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ACCMAP[6] 0x00000000=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MRU[4] 1500=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MAGICNUM[6] 0x6c336420=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP = 0x05)=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: State change = Stopped --> Req-Sent=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: RecvConfigReq(10) = state =3D Req-Sent=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ACCMAP[6] 0x00000000=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP = 0x05)=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MAGICNUM[6] 0x1ac87d4b=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MRRU[4] 1524=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ENDDISC[11] Local Addr: = myauthkey=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: SendConfigRej(10) = state =3D Req-Sent=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MRRU[4] 1524=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: RecvConfigAck(1) = state =3D Req-Sent=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: State change = Req-Sent --> Ack-Rcvd=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: RecvConfigReq(11) = state =3D Ack-Rcvd=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ACCMAP[6] 0x00000000=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP = 0x05)=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MAGICNUM[6] 0x1ac87d4b=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ENDDISC[11] Local Addr: = myauthkey=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: SendConfigAck(11) = state =3D Ack-Rcvd=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ACCMAP[6] 0x00000000=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP = 0x05)=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: MAGICNUM[6] 0x1ac87d4b=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: ENDDISC[11] Local Addr: = myauthkey=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: State change = Ack-Rcvd --> Opened=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: LayerUp=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: bundle: Authenticate=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: deflink: his =3D CHAP, = mine =3D CHAP=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: Chap Output: CHALLENGE=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: Chap Input: CHALLENGE = (from myauthkey)=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: Chap Output: RESPONSE = (myauthname)=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: Chap Input: FAILURE=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: Chap Input: Giving up = after name/key FAILURE=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: LayerDown=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: = SendTerminateReq(2) state =3D Opened=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: State change = Opened --> Closing=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: = RecvTerminateReq(12) state =3D Closing=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: = SendTerminateAck(12) state =3D Closing=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: = RecvTerminateAck(2) state =3D Closing=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: LayerFinish=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: State change = Closing --> Closed=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: LCP: deflink: State change = Closed --> Initial=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: deflink: Disconnected!=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: deflink: lcp -> hangup=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: deflink: Connect time: 3 = secs: 290 octets in, 284 octets out=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: total 191 bytes/sec, = peak 0 bytes/sec on Wed Oct 7 09:16:58 1998=20 Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: deflink: hangup -> closed = Oct 7 09:16:58 kryten ppp[6309]: tun0: Phase: bundle: Dead=20 Oct 7 09:17:01 kryten ppp[6309]: tun0: Phase: Chap Output: CHALLENGE=20 Oct 7 09:17:03 kryten ppp[6309]: tun0: Command: /dev/tty: close=20 Oct 7 09:17:04 kryten ppp[6309]: tun0: Phase: Chap Output: CHALLENGE=20 Oct 7 09:17:05 kryten ppp[6309]: tun0: Command: /dev/tty: quit=20 Oct 7 09:17:05 kryten ppp[6309]: tun0: Phase: PPP Terminated (normal).=20 ------=_NextPart_000_000A_01BDF1D4.C2ACFEC0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000901bdf191$b4883820$0a1e21cb>