Date: Wed, 28 Mar 2007 16:05:33 +0400 From: Yuri Pankov <y.pankov@irbis.net.ru> To: Pyun YongHyeon <pyunyh@gmail.com> Cc: freebsd-current@freebsd.org Subject: Re: [nfe] NVIDIA nForce4 CK804 MCP9 isn't working Message-ID: <20070328120531.GA732@darklight.abyss.local> In-Reply-To: <20070328040717.GA56450@cdnetworks.co.kr> References: <20070327221801.GA957@darklight.abyss.local> <20070328040717.GA56450@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
--J2SCkAp4GZ/dPZZf Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, Mar 28, 2007 at 01:07:17PM +0900, Pyun YongHyeon wrote: > On Wed, Mar 28, 2007 at 02:18:02AM +0400, Yuri Pankov wrote: > > Hi, > >=20 > > I've tried to use if_nfe with NVIDIA nForce4 CK804 MCP9 NIC (was > > using if_nve before without issues). > >=20 > > FreeBSD 7.0-CURRENT #3: Wed Mar 28 00:44:12 MSD 2007 amd64 > >=20 > > almost GENERIC kernel, only changes are SCHED_ULE and nodevice nve. > >=20 > > dmesg: > > nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xe800-0xe807 > > mem 0xf5102000-0xf5102fff irq 23 at device 10.0 on pci0 > > nfe0: using obsoleted if_watchdog interface > > nfe0: bpf attached > > nfe0: Ethernet address: 00:0f:ea:7d:f3:20 > > nfe0: [MPSAFE] > > nfe0: [ITHREAD] > > miibus1: <MII bus> on nfe0 > > ciphy0: <Cicada CS8201 10/100/1000TX PHY> PHY 7 on miibus1 > > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > > 1000baseT-FDX, auto > > nfe0: link state changed to DOWN > > nfe0: gigabit link up > > nfe0: link state changed to UP > >=20 > > pciconf: > > nfe0@pci0:10:0: class=3D0x068000 card=3D0xe0001458 chip=3D0x005710de r= ev=3D0xa3 > > hdr=3D0x00 > > vendor =3D 'Nvidia Corp' > > device =3D 'nForce4 Ultra NVidia Network Bus Enumerator' > > class =3D bridge > >=20 > > ifconfig: > > nfe0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > > 1500 > > options=3D2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU> > > ether 00:0f:ea:7d:f3:20 > > inet 10.10.10.1 netmask 0xffffff00 broadcast 10.10.10.255 > > media: Ethernet autoselect (1000baseTX <full-duplex>) > > status: active > >=20 > > ping 10.10.10.2 gives following tcpdump output: > > 01:45:37.304300 arp who-has 10.10.10.2 tell 10.10.10.1 > > 01:45:38.305363 arp who-has 10.10.10.2 tell 10.10.10.1 > > 01:45:39.306300 arp who-has 10.10.10.2 tell 10.10.10.1 > > and so on... > >=20 > > arp -a: > > ? (10.10.10.2) at (incomplete) on nfe0 [ethernet] > >=20 > > Manually changing media options, -rxcsum, -txcsum, adding static ARP > > entry for 10.10.10.2 doesn't help. > >=20 > > (and to mention once more, exactly the same setup, including ethernet > > media options, works with if_nve). > >=20 >=20 > How about new nfe(4) in the following URL? > http://people.freebsd.org/~yongari/nfe/if_nfe.c > http://people.freebsd.org/~yongari/nfe/if_nfereg.h > http://people.freebsd.org/~yongari/nfe/if_nfevar.h >=20 > I'm not sure but you may also need to apply attached ciphy(4) patch. >=20 > > --=20 > > Yuri >=20 >=20 >=20 > --=20 > Regards, > Pyun YongHyeon I've tried nfe driver from http://people.freebsd.org/~yongari/nfe/, with and without ciphy patch, still no joy. nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xe800-0xe807 mem 0xf5102000-0xf5102fff irq 23 at device 10.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf5102000 nfe0: bpf attached nfe0: Ethernet address: 00:0f:ea:7d:f3:20 nfe0: [MPSAFE] nfe0: [FILTER] miibus0: <MII bus> on nfe0 ciphy0: <Cicada CS8201 10/100/1000TX PHY> PHY 7 on miibus0 ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: link state changed to DOWN nfe0: link state changed to UP nfe0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D10b<RXCSUM,TXCSUM,VLAN_MTU,TSO4> ether 00:0f:ea:7d:f3:20 inet 10.10.10.1 netmask 0xffffff00 broadcast 10.10.10.255 media: Ethernet autoselect (1000baseTX <full-duplex>) status: active -- Yuri --J2SCkAp4GZ/dPZZf Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFGCloL8hBlB0qMSXYRAjJdAJ9nUZcqU7ssTtlX1an6ItOCJJ/qRgCgsS8b glHt9/j9JEEjzJVfyvkEcPA= =DzZ4 -----END PGP SIGNATURE----- --J2SCkAp4GZ/dPZZf--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070328120531.GA732>