Date: Thu, 10 Oct 2002 06:24:31 -0400 From: "Gerald A. Speak" <gaspeak@va.prestige.net> To: "leegold" <leegold@fastmail.fm>, freebsd-hardware@FreeBSD.ORG Subject: Re: sound card problems Message-ID: <200210100624.31748.gaspeak@va.prestige.net> In-Reply-To: <20021009043602.A3CF21AEC222@server5.fastmail.fm>
index | next in thread | previous in thread | raw e-mail
On Wednesday 09 October 2002 12:36 am, leegold wrote: > card is Creative AWE64 16-but Audio (SB 16 compatible) > In an ISA slot. > I compiled the kernel w/added lines at the end: > ...... > # Added by user ljg 10/2002 Should be: device snd rather than device pcm > device pcm > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 > > all went well - I rebooted and did: # cd /dev and # ./MAKEDEV snd0 > I noticed in /dev new devices created after this, and I can post an ls > -l > of /dev if needed. > But no sound, KDE can't find the card and dmesg has no mention of it. > Any help appreciated. > Note: in my bios I have plug and play OS disabled. > ------------------- > my dmesg shows no sound device (posted below warts and all): > su-2.05$ dmesg > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.4-RELEASE #0: Tue Oct 8 23:35:11 EDT 2002 > ljg@:/usr/src/sys/compile/CUSTOM > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium II/Pentium II Xeon/Celeron (233.29-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x634 Stepping = 4 > > Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, >MMX> real memory = 134217728 (131072K bytes) > config> di sn0 > config> di ie0 > config> di fe0 > config> di cs0 > config> di bt0 > config> di aic0 > config> di aha0 > config> di adv0 > config> q > avail memory = 126091264 (123136K bytes) > Preloaded elf kernel "kernel" at 0xc047e000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc047e09c. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 8 entries at 0xc00fdf40 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on > pci0 > pci1: <PCI bus> on pcib1 > pci1: <ATI Rage128-RL graphics accelerator> at 0.0 irq 11 > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> port 0x1420-0x142f at device 7.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1400-0x141f irq 9 > at device 7.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ugen0: Hewlett Packard HP USB CD-Writer Plus, rev 1.00/0.01, addr 2 > chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at > device 7.3 on pci0 > rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem > 0xf0000000-0xf00000ff irq 10 at device 13.0 on pci0 > rl0: Ethernet address: 00:00:e8:9d:02:aa > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > orm0: <Option ROMs> at iomem > 0xc0000-0xc7fff,0xe0000-0xe3fff,0xe4000-0xeffff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio4: <U.S. Robotics 56K Voice INT> at port 0x2f8-0x307 irq 3 on isa0 > sio4: type 16550A > ad0: 6533MB <SAMSUNG SV0682D> [14160/15/63] at ata0-master UDMA33 > acd0: CDROM <NEC CD-ROM DRIVE:28B> at ata1-master using PIO4 > afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave using PIO0 > Mounting root from ufs:/dev/ad0s3a > ad0s6: slice starts beyond end of the disk: rejecting it > ad0s2: raw partition size != slice size > ad0s2: start 4192965, end 8385929, size 4192965 > ad0s2c: start 4192965, end 13366079, size 9173115 > ad0s2: truncating raw partition > ad0s2: rejecting partition in BSD label: it isn't entirely within the > slice > ad0s2: start 4192965, end 8385929, size 4192965 > ad0s2g: start 6048453, end 11317956, size 5269504 > ad0s2: rejecting partition in BSD label: it isn't entirely within the > slice > ad0s2h: start 11317957, end 13366079, size 2048123 > su-2.05$ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the messagehome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210100624.31748.gaspeak>