Date: Thu, 28 Sep 2000 21:51:31 -0700 From: Bill Fenner <fenner@research.att.com> To: stable@freebsd.org Subject: 4.1.1 breakage: GUS, spash screen, CD writing Message-ID: <200009290451.VAA10122@windsor.research.att.com>
next in thread | raw e-mail | index | archive | help
Hi, I upgraded from a middle-aged 4.0-STABLE (exact age unknown) to 4.1.1-STABLE, and the following things broke: - My Gravis Ultrasound, which previously never probed, started panicing the system on attach. I had to remove (the non-working) pcm frommy kernel. - My splash screen doesn't work any more; it just provides a blank screen. I have a 320x200x8 .BMP file, with the following in loader.conf: splash_bmp_load="YES" bitmap_load="YES" bitmap_name="/boot/dogs.bmp" I used the "make buildkernel" and "make installkernel" targets,so I assume my splash_bmp.ko is up to date. - Burning CD's no longer works with my ATAPI CD-R. My first attempt reset the system with no visible messages (I was in X at the time); further attempts go like: fenestro% burncd -f /dev/acd1c -s 4 -e data d2.iso eject acd1: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=00 acd1: READ_TRACK_INFO command timeout - resetting ata1: resetting devices .. ata1-master: timeout waiting for command=ef s=10 e=50 done next writeable LBA 0 writing from file d2.iso size 579020 KB acd1: WRITE_BIG command timeout - resetting ata1: resetting devices .. ata1-master: timeout waiting for command=ef s=10 e=50 done only wrote 0 of 32768 bytes burncd: open(eject): No such file or directory fenestro% cdcontrol -f /dev/acd1c eject acd1: READ_TOC - NO SENSE asc=00 ascq=00 error=00 fenestro% (I haven't gotten the system to reset again). I tried rolling atapi-cd.c and atapi-cd.h back to RELENG_4_1_0_RELEASE but it didn't seem to help. I'll try rolling them back further to see if I can track this down. All of these things worked just peachy pre-upgrade. It was kind of a shock to have so much break on what should be such a minor upgrade. Has anyone experienced these or does anyone have any suggestions on debugging? Bill To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200009290451.VAA10122>