Date: Sat, 01 Oct 2011 18:49:33 +1000 From: Mattia Rossi <mrossi@swin.edu.au> To: Naoyuki Tai <ntai@smartfruit.com> Cc: freebsd-arm@freebsd.org Subject: Re: GlobalScale DreamPlug + FreeBSD 8.2 release Message-ID: <4E86D41D.1070908@swin.edu.au> In-Reply-To: <4E85D39F.1010606@smartfruit.com> References: <4E782686.6070500@smartfruit.com> <20110920160544.b8d6d969.ray@dlink.ua> <op.v131qha6i1oka3@luxor.smartfruit.com> <20110920173523.4043c0be.ray@dlink.ua> <op.v1324co3i1oka3@luxor.smartfruit.com> <4E85949F.1000004@swin.edu.au> <4E85D39F.1010606@smartfruit.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>> >> I don't know.. it just doesn't work for me. >> >> U-Boot 2011.06-02334-g8f495d9-dirty (Mar 28 2011 - 05:21:06) >> Marvell-DreamPlug >> >> SoC: Kirkwood 88F6281_A0 >> DRAM: 512 MiB >> SF: Detected MX25L1606 with page size 256, total 1 MiB >> In: serial >> Out: serial >> Err: serial >> Net: egiga0, egiga1 >> 88E1121 Initialized on egiga0 >> 88E1121 Initialized on egiga1 >> Hit any key to stop autoboot: 0 >> Marvell>> set ipaddr 192.168.12.80 >> Marvell>> set serverip 192.168.12.81 >> Marvell>> tftpboot 0x900000 kernel.bin >> No link on egiga0 >> Using egiga1 device >> TFTP from server 192.168.12.81; our IP address is 192.168.12.80 >> Filename 'kernel.bin'. >> Load address: 0x900000 >> Loading: >> ################################################################# >> ################################################################# >> ################################################################# >> ################################### >> done >> Bytes transferred = 3366392 (335df8 hex) >> Marvell>> go 0x900000 >> ## Starting application at 0x00900000 ... >> >> >> And there it just hangs. >> Kernel compiled with: >> KERNCONF=DB-88F6XXX >> TARGET=arm >> TARGET_ARCH=arm >> >> Help? >> >> Mat >> > > I have luck with SheevaPlug based kernel config. > Here is the kernel config file I'm using. It's based on SheevaPlug. > You probably need to adjust the root FS, network protocol. > > Good luck. > Thanks Naoyuki, I've tried the KERNCONF you sent me, but still no luck. I had to add the following line to get it to compile though: options FDT Hope that didn't kill it. The kernel still hangs after i tell uboot to go to 0x900000 This is weird. Mat
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E86D41D.1070908>