Date: Fri, 1 Jun 2001 08:24:38 -0500 From: "Richard J. Kuhns" <rjk@grauel.com> To: freebsd-stable@freebsd.org Subject: Problem with pcn driver on laptop, fresh -stable Message-ID: <15127.38806.45702.167471@moriarity.grauel.com>
next in thread | raw e-mail | index | archive | help
I've just done a buildworld/installworld on my laptop for the first time
since approx last November, with sources as of May 29.
The builtin ethernet card (AMD PCnet/PCI 10/100BaseTX) now works only after
a power cycle.
Here's a dmesg after a power cycle (when it works):
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #3: Tue May 29 11:33:46 EST 2001
rjk@molap.grauel.com:/usr/src/sys/compile/MOLAP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 127225856 (124244K bytes)
Preloaded elf kernel "kernel" at 0xc035a000.
Preloaded elf module "nfs.ko" at 0xc035a09c.
Preloaded elf module "linux.ko" at 0xc035a138.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c42 graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
pcm0: <Yamaha DS-1E (YMF744)> port 0x1400-0x1403,0x1080-0x10bf mem 0xfc010000-0xfc017fff irq 5 at device 9.0 on pci0
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0x10e0-0x10ff mem 0xfc018000-0xfc01801f irq 9 at device 11.0 on pci0
pcn0: Ethernet address: 00:90:f5:05:02:34
miibus0: <MII bus> on pcn0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
chip2: <PCI to CardBus bridge (vendor=1180 device=0475)> irq 3 at device 12.0 on pci0
pci0: <unknown card> (vendor=0x127a, dev=0x2015) at 13.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TORiSAN DVD-ROM DRD-U824> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
and here's the relevant portion after a reboot:
...
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
pcm0: <Yamaha DS-1E (YMF744)> port 0x1400-0x1403,0x1080-0x10bf mem 0xfc010000-0xfc017fff irq 5 at device 9.0 on pci0
pci0: <unknown card> (vendor=0x1022, dev=0x2000) at 11.0 irq 9
chip2: <PCI to CardBus bridge (vendor=1180 device=0475)> irq 3 at device 12.0 on pci0
pci0: <unknown card> (vendor=0x127a, dev=0x2015) at 13.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
...
Thanks for any help...
--
Richard Kuhns rjk@grauel.com
PO Box 6249 Tel: (765)477-6000 \
100 Sawmill Road x319
Lafayette, IN 47903 (800)489-4891 /
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15127.38806.45702.167471>