Date: Fri, 10 Feb 2006 07:15:28 +0100 From: =?ISO-8859-1?Q?Johan_Str=F6m?= <johan@stromnet.org> To: freebsd-stable@freebsd.org Subject: gmirror/disk problems! Message-ID: <24ECF01E-9881-41F3-A1D9-4C258489D41F@stromnet.org>
next in thread | raw e-mail | index | archive | help
--Apple-Mail-4-183655063
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
delsp=yes;
format=flowed
Hi list!
I've been experiencing problems earlier with gmirror (thread "Page
fault, GEOM problem??"). My gmirror crashed, and the box compleatly
froze.
Now I got a new mobo, and it has been working great since (no
crashes, and i get decent 40-50mb/s read/write instead of ~10-20).
This morning i woke up to this:
subdisk4: detached
ad4: detached
unknown: TIMEOUT - READ_DMA retrying (1 retry left) LBA=187595536
unknown: timeout waiting to issue command
unknown: error issueing READ_DMA command
GEOM_MIRROR: Device gm0s1: provider ad4s1 disconnected.
GEOM_MIRROR: Request failed (error=6). ad4s1[WRITE(offset=134373376,
length=16384)]
GEOM_MIRROR: Request failed (error=6). ad4s1[WRITE(offset=134438912,
length=16384)]
GEOM_MIRROR: Request failed (error=6). ad4s1[WRITE(offset=268591104,
length=16384)]
GEOM_MIRROR: Request failed (error=6). ad4s1[WRITE(offset=268607488,
length=16384)]
GEOM_MIRROR: Request failed (error=6). ad4s1[WRITE(offset=268656640,
length=16384)]
GEOM_MIRROR: Request failed (error=6). ad4s1[WRITE(offset=5966399488,
length=2048)]
GEOM_MIRROR: Request failed (error=5). ad4s1[READ(offset=96048882176,
length=32768)]
Just like "old times"... However, no page faults! Yay.. But.. what is
going on here?? Why does the atacontroler or whatever think they
need to detach my disk?? And how do i reattach it? I have tried some
stuff with atacontrol:
$ atacontrol list
ATA channel 0:
Master: acd0 <CD-ROM CDU701-F/1.0q> ATA/ATAPI revision 0
Slave: no device present
ATA channel 1:
Master: no device present
Slave: no device present
ATA channel 2:
Master: no device present
Slave: no device present
ATA channel 3:
Master: ad6 <Maxtor 7L300S0/BANC1G10> Serial ATA v1.0
Slave: no device present
$ atacontrol attach ata2
atacontrol: ioctl(IOCATAATTACH): File exists
$ atacontrol reinit ata2
< here i get a long system wide block>
Master: no device present
Slave: no device present
$
Okay so no luck reiniting it.. I dont realy wanna reboot the box
(each time this might happen).. But im happy that it doesnt crash
totally anymore heh...
dmesg of current system:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #2: Thu Dec 1 20:18:30 CET 2005
johan@elfi.stromnet.org:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP (1200.01-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
real memory = 536674304 (511 MB)
avail memory = 515833856 (491 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LUS0> irq 5 on acpi0
pci_link6: <ACPI PCI Link LUS1> irq 5 on acpi0
pci_link7: <ACPI PCI Link LUS2> irq 3 on acpi0
pci_link8: <ACPI PCI Link LKLN> irq 5 on acpi0
pci_link9: <ACPI PCI Link LAPU> irq 0 on acpi0
pci_link10: <ACPI PCI Link LAUI> irq 11 on acpi0
pci_link11: <ACPI PCI Link LKMO> irq 0 on acpi0
pci_link12: <ACPI PCI Link LKSM> irq 5 on acpi0
pci_link13: <ACPI PCI Link LFWR> irq 0 on acpi0
pci_link14: <ACPI PCI Link LETH> irq 0 on acpi0
pci_link15: <ACPI PCI Link LATA> irq 10 on acpi0
pci_link16: <ACPI PCI Link LSHD> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xf8000000-0xfbffffff at
device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebfb000-0xfebfbfff irq
20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfc000-0xfebfcfff irq
21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfdc00-0xfebfdcff
irq 22 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
nve0: <NVIDIA nForce MCP5 Networking Adapter> port 0xdc00-0xdc07 mem
0xfebfe000-0xfebfefff irq 20 at device 4.0 on pci0
nve0: Ethernet address 00:13:d4:bf:5b:79
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: Ethernet address: 00:13:d4:bf:5b:79
nve0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci_link0: BIOS IRQ 22 for 0.11.INTA is invalid
pci_link2: BIOS IRQ 21 for 0.6.INTA is invalid
pci2: <ACPI PCI bus> on pcib1
pci2: <display, VGA> at device 6.0 (no driver attached)
atapci0: <Promise PDC40518 SATA150 controller> port 0xc880-0xc8ff,
0xb800-0xb8ff mem 0xfeafd000-0xfeafdfff,0xfea80000-0xfea9ffff irq 16
at device 8.0 on pci2
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
ata5: <ATA channel 3> on atapci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem
0xfeafec00-0xfeafec7f irq 17 at device 9.0 on pci2
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:ef:c6:36
atapci1: <nVidia nForce2 MCP UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 9.0 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
atapci2: <nVidia nForce2 MCP SATA150 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0x7f00-0x7f0f,
0x7c00-0x7c7f irq 22 at device 11.0 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on acpi0
fdc0: [FAST]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,
0xc8800-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 1200008615 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <CD-ROM CDU701-F/1.0q> at ata0-master PIO4
ad6: 286188MB <Maxtor 7L300S0 BANC1G10> at ata3-master SATA150
ad10: 286188MB <Maxtor 7L300S0 BANC1G10> at ata5-master SATA150
I could try to move the disks to my promise sata2 tx4 card i bought
for the old mobo (which didnt have sata)... But i'd rather find the
problem ;)
Hope someone can help.
Thanks
Johan
--Apple-Mail-4-183655063--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?24ECF01E-9881-41F3-A1D9-4C258489D41F>