Date: Mon, 31 Dec 2007 10:39:47 -0500 (EST) From: "Tuc at T-B-O-H.NET" <ml@t-b-o-h.net> To: smithi@nimnet.asn.au (Ian Smith) Cc: freebsd-mobile@freebsd.org Subject: Re: Toshiba 2805-S301 + >5.4-STABLE Message-ID: <200712311539.lBVFdlOY027546@himinbjorg.tucs-beachin-obx-house.com> In-Reply-To: <Pine.BSF.3.96.1080101012655.1303A-100000@gaia.nimnet.asn.au>
next in thread | previous in thread | raw e-mail | index | archive | help
>
> On Mon, 31 Dec 2007, Tuc at T-B-O-H.NET wrote:
>
> > Has anyone found any tricks to getting a Toshiba
> > 2805-S301 to run anything later than 5.4-STABLE? It seems
> > that Xorg needs hal, which needs >= 5.5-RELEASE .
>
> Since I first cvsup'd my 5.4-R system to RELENG_5 over a year ago it's
> reckoned to be 5.5-STABLE. sysinstall thinks so too, just checked.
>
> FreeBSD paqi.nimnet.asn.au 5.5-STABLE FreeBSD 5.5-STABLE #0: Sat Mar 3
> 03:14:13 EST 2007 root@paqi.nimnet.asn.au:/usr/obj/usr/src/sys/PAQI5S_3 i386
>
> I haven't tried upgrading from Xorg 6.9 though, can't comment on hal.
>
> cheers, Ian
>
I boot 5.4, and the kernel continues fine. With 5.5, it stops..
Dec 30 12:12:18 gevjon kernel: atapci0: <Intel PIIX4 UDMA33 controller> port 0xf
ff0-0xffff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x10 bytes for rid 0x20 type 4
at 0xfff0
Dec 30 12:12:18 gevjon kernel: ata0: channel #0 on atapci0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x8 bytes for rid 0x10 type 4 a
t 0x1f0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x1 bytes for rid 0x14 type 4 a
t 0x3f6
Dec 30 12:12:18 gevjon kernel: ata0: reset tp1 mask=03 ostat0=50 ostat1=00
Dec 30 12:12:18 gevjon kernel: ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
Dec 30 12:12:18 gevjon kernel: ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
Dec 30 12:12:18 gevjon kernel: ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA
_MASTER>
Dec 30 12:12:18 gevjon kernel: ata0: [MPSAFE]
Dec 30 12:12:18 gevjon kernel: ata1: channel #1 on atapci0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x8 bytes for rid 0x18 type 4 a
t 0x170
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x1 bytes for rid 0x1c type 4 a
t 0x376
(5.5 FREEZES HERE)
Dec 30 12:12:18 gevjon kernel: ata1: reset tp1 mask=03 ostat0=50 ostat1=00
Dec 30 12:12:18 gevjon kernel: ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
Dec 30 12:12:18 gevjon kernel: ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
Dec 30 12:12:18 gevjon kernel: ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATA
PI_SLAVE,ATAPI_MASTER>
Dec 30 12:12:18 gevjon kernel: ata1: [MPSAFE]
Did you put anything special in any boot.loader, or config file?
Thanks, Tuc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200712311539.lBVFdlOY027546>