Date: Mon, 13 Aug 2007 21:29:21 GMT From: Andriy Podanenko <andriy@whitebox.color-pro.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/115479: ASUS P5K SE need more support Message-ID: <200708132129.l7DLTLqF002333@www.freebsd.org> Resent-Message-ID: <200708132130.l7DLU2Xv088949@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 115479
>Category: kern
>Synopsis: ASUS P5K SE need more support
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Aug 13 21:30:01 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Andriy Podanenko
>Release: FreeBSD 6.2-RELEASE and STABLE
>Organization:
Color Pro
>Environment:
FreeBSD podarok.voliacable.com 6.2-RELEASE-p7 FreeBSD 6.2-RELEASE-p7 #1: Mon Aug 13 21:03:26 UTC 2007 root@podarok.servebeer.com:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
Unsupported Intel p35 chipset PATA controller (only SATA with generic driver)
>How-To-Repeat:
Try it
It mostly works with SATA drives not on Marvell
>Fix:
need drivers support for
ICH9
Marvell 88SE6111
Onboard LAN
>Release-Note:
>Audit-Trail:
>Unformatted:
>>>>>>
atapci0@pci3:0:0: class=0x01018f card=0x82a21043 chip=0x612111ab rev=0xb1 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
class = mass storage
subclass = ATA
<<<<<<
Bad support for ICH9 (multiple USB bugs)
Marvell 88SE6111 PATA+SATA On-the-Go controller bug
Unsupported onboard PCIe Gigabit LAN AI NET2
On Marvell PATA I can`t see any HDD or ATAPI DVD 8(
!Good support for ALC883 audio!
******
dmesg
******
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #1: Mon Aug 13 21:03:26 UTC 2007
root@podarok.servebeer.com:/usr/obj/usr/src/sys/GENERIC
can't re-use a leaf (mddebug)!
link_elf_obj: symbol mix_setparentchild undefined
KLD file snd_hda.ko - could not finalize loading
module_register: module g_md already exists!
Module g_md failed to register: 17
module_register: module g_bsd already exists!
Module g_bsd failed to register: 17
module_register: module g_mbrext already exists!
Module g_mbrext failed to register: 17
module_register: module g_mbr already exists!
Module g_mbr failed to register: 17
ACPI APIC Table: <A_M_I_ OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2336.08-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,<b6>,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2146959360 (2047 MB)
avail memory = 2061086720 (1965 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ichwd module loaded
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <NEC > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbfffc00-0xfbffffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <GENERIC ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbfff800-0xfbfffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
umass0: Generic Mass Storage Device, rev 2.00/1.27, addr 2
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci5
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:c0:49:b3:8a:81
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <GENERIC ATA controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.2 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f mem 0xfbfff400-0xfbfff4ff irq 18 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
atapci2: <GENERIC ATA controller> port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 22 at device 31.5 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2336083190 Hz quality 800
Timecounters tick every 1.000 msec
The GEOM class MD is already loaded.
The GEOM class MBREXT is already loaded.
The GEOM class MBR is already loaded.
The GEOM class BSD is already loaded.
ad8: 114473MB <Seagate ST3120813AS 2AAA> at ata4-master UDMA33
ad10: 190782MB <Seagate ST3200820AS 3.AAD> at ata5-master UDMA33
ad12: 114473MB <Seagate ST3120813AS 2AAA> at ata6-master UDMA33
ad14: 152627MB <Seagate ST3160815AS 3.AAD> at ata7-master UDMA33
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
******
pciconf -l -v
hostb0@pci0:0:0: class=0x060000 card=0x82761043 chip=0x29c08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000088 chip=0x29c18086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci0@pci0:26:0: class=0x0c0300 card=0x82771043 chip=0x29378086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci1@pci0:26:1: class=0x0c0300 card=0x82771043 chip=0x29388086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci2@pci0:26:2: class=0x0c0300 card=0x82771043 chip=0x29398086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci0@pci0:26:7: class=0x0c0320 card=0x82771043 chip=0x293c8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
none0@pci0:27:0: class=0x040300 card=0x829f1043 chip=0x293e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
pcib2@pci0:28:0: class=0x060400 card=0x00000040 chip=0x29408086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib3@pci0:28:4: class=0x060400 card=0x00000040 chip=0x29488086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib4@pci0:28:5: class=0x060400 card=0x00000040 chip=0x294a8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci3@pci0:29:0: class=0x0c0300 card=0x82771043 chip=0x29348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci4@pci0:29:1: class=0x0c0300 card=0x82771043 chip=0x29358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci5@pci0:29:2: class=0x0c0300 card=0x82771043 chip=0x29368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci1@pci0:29:7: class=0x0c0320 card=0x82771043 chip=0x293a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib5@pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086 rev=0x92 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x82771043 chip=0x29188086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atapci1@pci0:31:2: class=0x01018f card=0x82771043 chip=0x29218086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
ichsmb0@pci0:31:3: class=0x0c0500 card=0x82771043 chip=0x29308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
atapci2@pci0:31:5: class=0x010185 card=0x82771043 chip=0x29268086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
none1@pci1:0:0: class=0x030000 card=0x81ec1043 chip=0x016110de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GeForce 6200 TurboCache(TM)'
class = display
subclass = VGA
atapci0@pci3:0:0: class=0x01018f card=0x82a21043 chip=0x612111ab rev=0xb1 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
class = mass storage
subclass = ATA
none2@pci2:0:0: class=0x020000 card=0x82261043 chip=0x10481969 rev=0xb0 hdr=0x00
class = network
subclass = ethernet
******
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200708132129.l7DLTLqF002333>