Date: Thu, 06 Nov 2008 10:39:45 -0700 (MST) From: "M. Warner Losh" <imp@bsdimp.com> To: lme@FreeBSD.org Cc: freebsd-arm@FreeBSD.org, mav@FreeBSD.org, freebsd-current@FreeBSD.org, lars.engels@0x20.net, freebsd-mobile@FreeBSD.org Subject: Re: RFC: PCI SD host controller driver & mmc/mmcsd modules improvements Message-ID: <20081106.103945.660268105.imp@bsdimp.com> In-Reply-To: <20081106172850.GG8256@e.0x20.net> References: <49131109.2020601@FreeBSD.org> <20081106.101047.163264510.imp@bsdimp.com> <20081106172850.GG8256@e.0x20.net>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <20081106172850.GG8256@e.0x20.net>
Lars Engels <lme@FreeBSD.org> writes:
: On Thu, Nov 06, 2008 at 10:10:47AM -0700, M. Warner Losh wrote:
: > In message: <49131109.2020601@FreeBSD.org>
: > Alexander Motin <mav@FreeBSD.org> writes:
: > : Lars Engels wrote:
: > : > 1. How can I tune the PCI configuration? With pciconf -w or so?
: > :
: > : Yes. `pciconf -r -b device addr` to read and `pciconf -w -b device addr
: > : value` to write.
: >
: > I have changes that almost make my TI card do it.
:
: So you're still working on this?
TI changes are different than Richo changes
: > : > 2. Unfortunately the sysctl did not change a thing with regard to the
: > : > Card reader.
: > :
: > : Have you added it to the loader.conf and rebooted?
: > :
: > : > 3. I added the chip ID and the second device is now recognized as a
: > : > sdhci device but still does not see any card inserted:
: > : >
: > : > Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't specify base
: > : > clock frequency.
: > : > Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't specify
: > : > timeout clock frequency.
: > : > Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't report any
: > : > support voltages.
: > :
: > : Looks like it is not enough compatible, or even not compatible.
: >
: > Chances are good that you need to the workaround to turn on these
: > things.
:
: Tell me where I can get the workaround when you have a working version
: or something to test. :)
I'll look at the linux workaround...
Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081106.103945.660268105.imp>