Date: Sat, 1 Oct 2005 22:57:53 -0700 (PDT) From: Donn Miller <hackr_d@yahoo.com> To: freebsd-current@freebsd.org Subject: ACPI irq routing problems on Averatec 5428hx Message-ID: <20051002055754.89962.qmail@web32914.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Now, I think the answer might be to ditch the Averatec. But, anyways,
if I don't disable ACPI on boot, I get a lot of errors like:
device]: couldn't map interrupt
device_attach: [device] attach returned 6
Attached is a non-verbose and a verbose dmesg output from a -current
build within a week or so. I've been having this problems for quite a
while. If I disable ACPI, everything works, but I can't use the cpu
frequency scaling feature, and the fans run like crazy.
Verbose dmesg -> dmesg_v.out
non-Verbose dmesg -> dmesg_n.out
I have the same issues with Linux, but I usually can get around this by
passing the "acpi=noirq" flag to the kernel to enable ACPI but to
disable acpi for irq routing. Can I do this with FreeBSD? I think the
bios in this laptop is crap.
Thanks.
Donn
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
[-- Attachment #2 --]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #0: Thu Sep 29 08:00:08 EDT 2005
dmmiller@:/usr/obj/usr/src/sys/AVERATEC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Athlon(tm) XP -M Processor 2800+ (1603.65-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xfc0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc0500800<SYSCALL,NX,MMX+,3DNow+,3DNow>
real memory = 502726656 (479 MB)
avail memory = 482590720 (460 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link ALKA> irq 9 on acpi0
pci_link1: <ACPI PCI Link ALKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link ALKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link ALKD> irq 7 on acpi0
pci_link4: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link5: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link7: <ACPI PCI Link LNKD> irq 7 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <ENE CB1410 PCI-CardBus Bridge> irq 17 at device 9.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb: Unable to map IRQ...
device_attach: cbb0 attach returned 12
ral0: <Ralink Technology RT2500> mem 0xe8000000-0xe8001fff irq 19 at device 11.0 on pci0
ral0: could not allocate interrupt resource
device_attach: ral0 attach returned 6
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 21 at device 16.0 on pci0
uhci0: Could not allocate irq
device_attach: uhci0 attach returned 6
uhci1: <VIA 83C572 USB controller> port 0x1820-0x183f irq 21 at device 16.1 on pci0
uhci1: Could not allocate irq
device_attach: uhci1 attach returned 6
uhci2: <VIA 83C572 USB controller> port 0x1840-0x185f irq 21 at device 16.2 on pci0
uhci2: Could not allocate irq
device_attach: uhci2 attach returned 6
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8002000-0xe80020ff irq 21 at device 16.3 on pci0
ehci0: Could not allocate irq
device_attach: ehci0 attach returned 6
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x1400-0x14ff mem 0xe8002400-0xe80024ff irq 23 at device 18.0 on pci0
vr0: couldn't map interrupt
device_attach: vr0 attach returned 6
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd8000-0xdffff,0xe3000-0xe3fff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1603646703 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <IC25N040ATMR04 0 MO2OAD4A> at ata0-master UDMA100
acd0: DVDR <Slimtype DVDRW SOSW-852S/PSF2> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s3a
[-- Attachment #3 --]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #0: Thu Sep 29 08:00:08 EDT 2005
dmmiller@:/usr/obj/usr/src/sys/AVERATEC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a17000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0a17194.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a17240.
Calibrating clock(s) ... i8254 clock: 1193191 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1603648214 Hz
CPU: Mobile AMD Athlon(tm) XP -M Processor 2800+ (1603.65-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xfc0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc0500800<SYSCALL,NX,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 502726656 (479 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001d6c9fff, 480923648 bytes (117413 pages)
avail memory = 482590720 (460 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7f60
bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd750+0x16c
pnpbios: Found PnP BIOS data at 0xc00f7ff0
pnpbios: Entry = f0000:c52c Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
mem: <memory>
Pentium Pro MTRR support enabled
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 03 d9 ba 00 c0 01 00 00 00 7a 3b
00 c0 00 02 00 01 16 63 00 c0 17 63 00 c0 18 63
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 32 mode(s) found
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c3b7a (c0003b7a)
VESA: VIA K8N800
VESA:
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02041106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdf00
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 18 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 18 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 18 C 0x03 3 4 6 9 10 11 12 14 15
embedded 0 18 D 0x05 3 4 6 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 9 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 3
pci_link0: <ACPI PCI Link ALKA> irq 9 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 16 17 18 19 20 21 22 23
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link1: <ACPI PCI Link ALKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 16 17 18 19 20 21 22 23
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link2: <ACPI PCI Link ALKC> irq 10 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 22
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link3: <ACPI PCI Link ALKD> irq 7 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 21
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link4: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 12 14 15
pci_link5: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 10 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 12 14 15
pci_link6: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 11 12 14 15
pci_link7: <ACPI PCI Link LNKD> irq 7 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0204, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x1106, dev=0x1204, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2204, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3204, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4204, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7204, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb188, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1524, dev=0x1410, revid=0x01
bus=0, slot=9, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 17
found-> vendor=0x1814, dev=0x0201, revid=0x01
bus=0, slot=11, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8000000, size 13, enabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 19
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8002000, size 8, enabled
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001860, size 4, enabled
found-> vendor=0x1106, dev=0x3059, revid=0x50
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001000, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.PIB_.ALKC:0)
pci_link2: Picked IRQ 22 with weight 0
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.PIB_.ALKC
found-> vendor=0x1106, dev=0x3068, revid=0x80
bus=0, slot=17, func=6
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00000000, size 8, port disabled
found-> vendor=0x1106, dev=0x3065, revid=0x74
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 1, range 32, base e8002400, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <VIA 8380 host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: Aperture Base[0]: 0x00000078
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe9000000-0xe9ffffff
pcib1: prefetched decode 0xf8000000-0xfbffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PPB_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3108, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f8000000, size 26, enabled
pcib1: (null) requested memory range 0xf8000000-0xfbffffff: good
map[14]: type 1, range 32, base e9000000, size 24, enabled
pcib1: (null) requested memory range 0xe9000000-0xe9ffffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <ENE CB1410 PCI-CardBus Bridge> irq 17 at device 9.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb: Unable to map IRQ...
device_attach: cbb0 attach returned 12
ral0: <Ralink Technology RT2500> mem 0xe8000000-0xe8001fff irq 19 at device 11.0 on pci0
ral0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xe8000000
ral0: could not allocate interrupt resource
device_attach: ral0 attach returned 6
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 21 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: Could not allocate irq
device_attach: uhci0 attach returned 6
uhci1: <VIA 83C572 USB controller> port 0x1820-0x183f irq 21 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci1: Could not allocate irq
device_attach: uhci1 attach returned 6
uhci2: <VIA 83C572 USB controller> port 0x1840-0x185f irq 21 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci2: Could not allocate irq
device_attach: uhci2 attach returned 6
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8002000-0xe80020ff irq 21 at device 16.3 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8002000
ehci0: Could not allocate irq
device_attach: ehci0 attach returned 6
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x1400-0x14ff mem 0xe8002400-0xe80024ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400
vr0: couldn't map interrupt
device_attach: vr0 attach returned 6
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd8000-0xdffff,0xe3000-0xe3fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1603648214 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
acpi_tz0: _AC2: temperature 58.8 >= setpoint 34.8
acpi_tz0: _AC1: temperature 58.8 >= setpoint 54.8
acpi_tz0: switched from NONE to _AC1: 58.8C
acpi_tz0: _AC2: temperature 58.8 >= setpoint 34.8
acpi_tz0: _AC2: temperature 58.8 >= setpoint 34.8
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
acpi_tz0: _AC2: temperature 58.8 >= setpoint 34.8
acpi_tz0: _AC2: temperature 58.8 >= setpoint 34.8
ad0: setting PIO4 on VIA 8235 chip
ad0: setting UDMA100 on VIA 8235 chip
ad0: 38154MB <IC25N040ATMR04 0 MO2OAD4A> at ata0-master UDMA100
ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on VIA 8235 chip
acd0: setting UDMA33 on VIA 8235 chip
acd0: <Slimtype DVDRW SOSW-852S/PSF2> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
acpi_tz0: _AC2: temperature 60.8 >= setpoint 34.8
acpi_tz0: _AC2: temperature 58.8 >= setpoint 34.8
acpi_tz0: _AC2: temperature 59.8 >= setpoint 34.8
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051002055754.89962.qmail>