Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 8 Dec 2021 19:33:22 +0000 (GMT)
From:      jenkins-admin@FreeBSD.org
To:        manu@FreeBSD.org, dev-ci@FreeBSD.org
Cc:        jenkins-admin@FreeBSD.org
Subject:   FreeBSD-main-amd64-test - Build #20037 - Still Failing
Message-ID:  <269020530.3077.1638992002855@jenkins.ci.freebsd.org>
In-Reply-To: <1774718578.3073.1638984917169@jenkins.ci.freebsd.org>
References:  <1774718578.3073.1638984917169@jenkins.ci.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
------=_Part_3076_1188050871.1638992002333
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

FreeBSD-main-amd64-test - Build #20037 (547fc67fecea51033a4b001d5b589f0e6cf=
8d820) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20037=
/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20037/c=
hanges
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20037/co=
nsole

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

547fc67fecea51033a4b001d5b589f0e6cf8d820 by manu:
tzsetup: Default to UTC



The end of the build log:

[...truncated 4.22 MB...]
#8 0xffffffff810bdc94 at amd64_syscall+0x6b4
#9 0xffffffff8108ed2b at fast_syscall_common+0xf8
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by 240 to 240 (pfsync bulk start)
epair122b: link state changed to DOWN
epair122a: link state changed to DOWN
epair123b: link state changed to DOWN
epair123a: link state changed to DOWN
passed  [2.399s]
sys/netpfil/pf/pfsync:basic_defer  ->  epair122a: Ethernet address: 02:19:3=
9:6d:26:0a
epair122b: Ethernet address: 02:19:39:6d:26:0b
epair122a: link state changed to UP
epair122b: link state changed to UP
epair123a: Ethernet address: 02:e3:5f:33:96:0a
epair123b: Ethernet address: 02:e3:5f:33:96:0b
epair123a: link state changed to UP
epair123b: link state changed to UP
epair124a: Ethernet address: 02:b3:6d:4c:70:0a
epair124b: Ethernet address: 02:b3:6d:4c:70:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by 240 to 240 (pfsync bulk start)
epair123b: link state changed to DOWN
epair123a: link state changed to DOWN
epair124b: link state changed to DOWN
epair124a: link state changed to DOWN
passed  [2.396s]
sys/netpfil/pf/pfsync:bulk  ->  epair123a: Ethernet address: 02:e1:71:ff:b9=
:0a
epair123b: Ethernet address: 02:e1:71:ff:b9:0b
epair123a: link state changed to UP
epair123b: link state changed to UP
epair124a: Ethernet address: 02:67:85:89:e8:0a
epair124b: Ethernet address: 02:67:85:89:e8:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair125a: Ethernet address: 02:e5:e9:b2:54:0a
epair125b: Ethernet address: 02:e5:e9:b2:54:0b
epair125a: link state changed to UP
epair125b: link state changed to UP
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
epair124b: link state changed to DOWN
epair124a: link state changed to DOWN
epair125b: link state changed to DOWN
epair125a: link state changed to DOWN
passed  [3.413s]
sys/netpfil/pf/pfsync:defer  ->  epair124a: Ethernet address: 02:f3:55:3f:f=
d:0a
epair124b: Ethernet address: 02:f3:55:3f:fd:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair125a: Ethernet address: 02:94:8b:62:ab:0a
epair125b: Ethernet address: 02:94:8b:62:ab:0b
epair125a: link state changed to UP
epair125b: link state changed to UP
epair126a: Ethernet address: 02:86:dd:eb:b1:0a
epair126b: Ethernet address: 02:86:dd:eb:b1:0b
epair126a: link state changed to UP
epair126b: link state changed to UP
carp: demoted by 240 to 240 (pfsync bulk start)
epair124b: promiscuous mode enabled
epair126b: promiscuous mode enabled
epair125b: promiscuous mode enabled
epair126b: promiscuous mode disabled
carp: demoted by -240 to 0 (pfsync bulk done)
epair124b: promiscuous mode disabled
epair125b: promiscuous mode disabled
epair124b: link state changed to DOWN
epair124a: link state changed to DOWN
epair125b: link state changed to DOWN
epair125a: link state changed to DOWN
epair126b: link state changed to DOWN
epair126a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [4.762s]
sys/netpfil/pf/proxy:ftp  ->  skipped: Required program 'twistd' not found =
in PATH  [0.002s]
sys/netpfil/pf/rdr:basic  ->  epair124a: Ethernet address: 02:33:ee:83:1b:0=
a
epair124b: Ethernet address: 02:33:ee:83:1b:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair124a: link state changed to DOWN
epair124b: link state changed to DOWN
passed  [4.198s]
sys/netpfil/pf/ridentifier:basic  ->  epair124a: Ethernet address: 02:0b:5e=
:b4:94:0a
epair124b: Ethernet address: 02:0b:5e:b4:94:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
lo0: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
epair124a: link state changed to DOWN
epair124b: link state changed to DOWN
passed  [5.354s]
sys/netpfil/pf/route_to:icmp_nat  ->  epair124a: Ethernet address: 02:51:3a=
:3a:db:0a
epair124b: Ethernet address: 02:51:3a:3a:db:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair125a: Ethernet address: 02:4f:72:f8:38:0a
epair125b: Ethernet address: 02:4f:72:f8:38:0b
epair125a: link state changed to UP
epair125b: link state changed to UP
epair126a: Ethernet address: 02:1a:7e:93:92:0a
epair126b: Ethernet address: 02:1a:7e:93:92:0b
epair126a: link state changed to UP
epair126b: link state changed to UP
nd6_setmtu0: new link MTU on epair126a (500) is too small for IPv6
nd6_setmtu0: new link MTU on epair126b (500) is too small for IPv6
epair124a: promiscuous mode enabled
epair124a: promiscuous mode disabled
epair124a: link state changed to DOWN
epair124b: link state changed to DOWN
passed  [12.623s]
sys/netpfil/pf/route_to:multiwan  ->  epair124a: Ethernet address: 02:6f:f1=
:47:cc:0a
epair124b: Ethernet address: 02:6f:f1:47:cc:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair127a: Ethernet address: 02:35:2a:45:a8:0a
epair127b: Ethernet address: 02:35:2a:45:a8:0b
epair127a: link state changed to UP
epair127b: link state changed to UP
epair128a: Ethernet address: 02:0b:7b:ee:08:0a
epair128b: Ethernet address: 02:0b:7b:ee:08:0b
epair128a: link state changed to UP
epair128b: link state changed to UP
epair129a: Ethernet address: 02:c8:d2:37:59:0a
epair129b: Ethernet address: 02:c8:d2:37:59:0b
epair129a: link state changed to UP
epair129b: link state changed to UP
lo0: link state changed to UP
passed  [0.638s]
sys/netpfil/pf/route_to:multiwanlocal  ->  epair130a: Ethernet address: 02:=
33:68:43:3c:0a
epair130b: Ethernet address: 02:33:68:43:3c:0b
epair130a: link state changed to UP
epair130b: link state changed to UP
epair131a: Ethernet address: 02:87:36:9e:21:0a
epair131b: Ethernet address: 02:87:36:9e:21:0b
epair131a: link state changed to UP
epair131b: link state changed to UP
epair132a: Ethernet address: 02:bf:ff:66:64:0a
epair132b: Ethernet address: 02:bf:ff:66:64:0b
epair132a: link state changed to UP
epair132b: link state changed to UP
epair133a: Ethernet address: 02:58:9d:91:88:0a
epair133b: Ethernet address: 02:58:9d:91:88:0b
epair133a: link state changed to UP
epair133b: link state changed to UP
pid 752 (kyua), jid 0, uid 0, was killed: out of swap space
pid 691 (sh), jid 0, uid 0, was killed: out of swap space
pid 686 (sh), jid 0, uid 0, was killed: out of swap space
pid 679 (auditd), jid 0, uid 0, was killed: out of swap space
pid 565 (sh), jid 0, uid 0, was killed: out of swap space
pid 479 (devd), jid 0, uid 0, was killed: out of swap space
pid 751 (sh), jid 0, uid 0, was killed: out of swap space
pid 744 (sh), jid 0, uid 0, was killed: out of swap space
pid 738 (ifconfig), jid 0, uid 0, was killed: out of swap space
pid 733 (jail), jid 0, uid 0, was killed: out of swap space
pid 731 (sh), jid 0, uid 0, was killed: out of swap space
carp: demoted by -240 to 0 (pfsync bulk fail)
2021-12-08T19:33:14.097124+00:00 - init 1 - - some processes would not die;=
 ps axl advised
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...=20
Syncing disks, vnodes remaining... 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... do=
ne
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... do=
ne
All buffers synced.
swp_pager_getswapspace(3): failed
lock order reversal:
 1st 0xfffff80005878070 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_moun=
t.c:2122
 2nd 0xfffff80005a4a3f0 fdescfs (fdescfs, lockmgr) @ /usr/src/sys/kern/vfs_=
subr.c:2995
lock order devfs -> fdescfs attempted at:
#0 0xffffffff80c6e5bd at witness_checkorder+0xbdd
#1 0xffffffff80bccac2 at lockmgr_lock_flags+0x182
#2 0xffffffff80d04144 at _vn_lock+0x54
#3 0xffffffff80cec65f at vget_finish+0x4f
#4 0xffffffff82510242 at fdesc_root+0x22
#5 0xffffffff80ced7dc at vflush+0x4c
#6 0xffffffff825101f2 at fdesc_unmount+0x72
#7 0xffffffff80ce2923 at dounmount+0x7c3
#8 0xffffffff80ceeeea at vfs_unmountall+0x6a
#9 0xffffffff80cc048c at bufshutdown+0x31c
#10 0xffffffff80bfdb43 at kern_reboot+0x203
#11 0xffffffff80bfd8e8 at sys_reboot+0x3a8
#12 0xffffffff810bdc94 at amd64_syscall+0x6b4
#13 0xffffffff8108ed2b at fast_syscall_common+0xf8
pid 739 (jail), jid 0, uid 0: exited on signal 11
Uptime: 1h57m17s
lock order reversal:
 1st 0xffffffff81f9dba0 cc_list (cc_list, rw) @ /usr/src/sys/netinet/cc/cc.=
c:245
 2nd 0xffffffff81f9d420 vnet_rwlock (vnet_rwlock, rw) @ /usr/src/sys/netine=
t/cc/cc.c:208
lock order cc_list -> vnet_rwlock attempted at:
#0 0xffffffff80c6e5bd at witness_checkorder+0xbdd
#1 0xffffffff80bf9162 at __rw_rlock_int+0x82
#2 0xffffffff80dd3933 at cc_deregister_algo+0x113
#3 0xffffffff80dd3eea at cc_modevent+0x1a
#4 0xffffffff80bd8f5b at module_shutdown+0x6b
#5 0xffffffff80bfde1e at kern_reboot+0x4de
#6 0xffffffff80bfd8e8 at sys_reboot+0x3a8
#7 0xffffffff810bdc94 at amd64_syscall+0x6b4
#8 0xffffffff8108ed2b at fast_syscall_common+0xf8
acpi0: Powering system off
+ rc=3D0
+ echo 'bhyve return code =3D 0'
bhyve return code =3D 0
+ sudo /usr/sbin/bhyvectl '--vm=3Dtestvm-main-amd64-20037' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=3Dmeta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./run.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or direc=
tory
+ report=3Dtest-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report=
.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins5264416137161995084.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '547fc67fecea5=
1033a4b001d5b589f0e6cf8d820', 'branch': 'main', 'target': 'amd64', 'target_=
arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../547fc67fecea51033a4b=
001d5b589f0e6cf8d820/amd64/amd64\n"
Recording test results
ERROR: Step =E2=80=98Publish JUnit test result report=E2=80=99 failed: No t=
est report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address
------=_Part_3076_1188050871.1638992002333--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?269020530.3077.1638992002855>