Date: Mon, 12 Oct 2015 14:28:44 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 200993] camcontrol commands results in Periph destroyed on mrsas Message-ID: <bug-200993-8-S9JLKmTeT7@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-200993-8@https.bugs.freebsd.org/bugzilla/> References: <bug-200993-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200993 --- Comment #8 from informatique.src@gmail.com --- Hi, I'm having the same issue on a Dell r730xd machine with a PERC H330 Mini controller (It Mode) and FreeBSD 10.2p5 Is there any fix or workaround available please ? Thanks ! root@localhost:~ # MegaCli -AdpAllInfo -aAll Adapter #0 ============================================================================== Versions ================ Product Name : PERC H330 Mini Serial No : 58Q004F FW Package Build: 25.3.0.0016 Mfg. Data ================ Mfg. Date : 08/28/15 Rework Date : 08/28/15 Revision No : A01 Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 6.23.03.0_4.16.07.00_0x060C0200 Ctrl-R Version : 5.04-0012 FW Version : 4.250.01-4405 NVDATA Version : 3.1411.01-0015 Boot Block Version : 3.02.00.00-0001 Pending Images in Flash ================ None PCI Info ================ Controller Id : 0000 Vendor Id : 1000 Device Id : 005f SubVendorId : 1028 SubDeviceId : 1f4b Host Interface : PCIE ChipRevision : C0 Link Speed : 3 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 500056b3cc9fe2ff 1 0000000000000000 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 514187702f772200 BBU : Absent Alarm : Absent NVRAM : Present Serial Debugger : Present Memory : Absent Flash : Present Memory Size : 0MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Present ROC temperature : 51 degree Celsius Controller temperature : 51 degree Celcius Settings ================ Current Time : 16:21:39 10/12, 2015 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 4 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : 128MB Cluster Mode : Disabled Alarm : Disabled Auto Rebuild : Enabled Battery Warning : Disabled Ecc Bucket Size : 255 Ecc Bucket Leak Rate : 240 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Disabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : Yes Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0 Auto Enhanced Import : No Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No POST delay : 90 seconds BIOS Error Handling : Pause on Errors Current Boot Mode :Normal Capabilities ================ RAID Level Supported : RAID00 Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 0 Max Spans Per VD : 0 Max Arrays : 0 Max Number of VDs : 0 Max Parallel Commands : 256 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 20 Max LD per array : 16 Min Strip Size : 64 KB Max Strip Size : 64 KB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB Device Present ================ Virtual Drives : 0 Degraded : 0 Offline : 0 Physical Devices : 13 Disks : 12 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : No Dedicated Hot Spare : No Revertible Hot Spares : Yes Foreign Config Import : No Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : No Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : No Support PI : Yes Support Boot Time PFK Change : No Disable Online PFK Change : No Support LDPI Type1 : No Support LDPI Type2 : Yes Support LDPI Type3 : No Support Shield State : Yes Block SSD Write Disk Cache Change: No Support Online FW Update : Yes Supported VD Operations ================ Read Policy : No Write Policy : No IO Policy : No Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : Yes Support Breakmirror : Yes Power Savings : Yes Supported PD Operations ================ Force Online : No Force Offline : Yes Force Rebuild : No Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes NCQ : No Disable Copyback : No Enable JBOD : Yes Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : No Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : No Disable Spin Down of hot spares : Yes Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WT Read Policy : None Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : No Coercion Mode : 128MB ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : 1 Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : No Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 2 Disable Ctrl-R : No Enable Web BIOS : No Direct PD Mapping : Yes BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : No Disable Puncturing : No Zero Based Enclosure Enumeration : Yes PreBoot CLI Enabled : No LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : Yes Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : Yes Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : Yes Max LD per array : 16 Power Saving option : Don't spin down unconfigured drives Don't spin down Hot spares Don't Auto spin down Configured Drives Power settings apply to all drives - individual PD/LD power settings cannot be set Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Cached writes are not used for spun down VDs Can schedule disable power savings at controller level Default spin down time in minutes: 30 Enable JBOD : Yes TTY Log In Flash : Yes Auto Enhanced Import : No BreakMirror RAID Support : Yes Disable Join Mirror : Yes Enable Shield State : No Time taken to detect CME : 60s Exit Code: 0x00 -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-200993-8-S9JLKmTeT7>