Date: Mon, 21 Sep 1998 19:02:02 -0700 From: Parag Patel <parag@cgt.com> To: current@FreeBSD.ORG Subject: CAM and Adaptec 7880 on motherboard problem Message-ID: <199809220202.TAA00429@pinhead.parag.codegen.com>
next in thread | raw e-mail | index | archive | help
This is a multipart MIME message.
--==_Exmh_18489535640
Content-Type: text/plain; charset=us-ascii
I'm having some minor problems with CAM as of early this morning (Sept
21). Firstly, it does appear to be working. Once it get past the
probing, things seem to be running just fine.
The problem is at probe time. It takes many minutes (5-7) to decide
there are no LUNs attached to SCSI ID 4, which is a Sony CDU-926S CD-R
drive. It eventally aborts out after issuing a bus reset. I was
getting these errors from a kernel a few days ago, but it went through
them a lot faster than it does now. Also, the Sony has no LUNs but CAM
seems to think it has.
Is there some BIOS setting I should now be using to prevent CAM from
getting into this timeout loop?
The dmesg output is appended below. I get the same output from the
GENERIC kernel built from the same sources.
Thanks in advance!
-- Parag
--==_Exmh_18489535640
Content-Type: text/plain ; name="dmesg.out"; charset=us-ascii
Content-Description: dmesg.out
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-BETA #9: Mon Sep 21 18:16:19 PDT 1998
root@pinhead.parag.codegen.com:/usr/src/sys/compile/PINHEAD
Timecounter "i8254" frequency 1193182 Hz cost 3031 ns
CPU: Pentium II (686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 268435456 (262144K bytes)
avail memory = 258211840 (252160K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 19 on pci0.4.2
chip4: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3
ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 19 on pci0.6.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
de0: <Digital 21140 Fast Ethernet> rev 0x12 int a irq 17 on pci0.11.0
de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:c0:7e:df:e4
de0: enabling 10baseT port
Probing for devices on PCI bus 1:
vga0: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 16 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x08de2f0a Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x08de2f0a) at 0x220-0x22f irq 10 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 not probed due to drq conflict with pcm1 at 1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 at 0x2e8-0x2ef irq 9 on isa
sio3: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x278-0x27f on isa
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (atapi): <TOSHIBA CD-ROM XM-6202B/1108>, removable, accel, ovlap, dma, iordis
wcd0: 5512Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
joy0 at 0x201 on isa
joy0: joystick
joy1 not probed due to I/O address conflict with joy0 at 0x201
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
ccd0-3: Concatenated disk drivers
SMP: AP CPU #1 Launched!
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe4:ahc0:0:4:1): SCB 0x4 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe4:ahc0:0:4:1): BDR message in message buffer
(probe4:ahc0:0:4:1): SCB 0x4 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe4:ahc0:0:4:1): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 5 SCBs aborted
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe4:ahc0:0:4:2): SCB 0x2 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe4:ahc0:0:4:2): BDR message in message buffer
(probe4:ahc0:0:4:2): SCB 0x2 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe4:ahc0:0:4:2): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe0:ahc0:0:4:3): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:3): BDR message in message buffer
(probe0:ahc0:0:4:3): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:3): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe0:ahc0:0:4:4): SCB 0x2 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:4): BDR message in message buffer
(probe0:ahc0:0:4:4): SCB 0x2 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:4): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe0:ahc0:0:4:5): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:5): BDR message in message buffer
(probe0:ahc0:0:4:5): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:5): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe0:ahc0:0:4:6): SCB 0x2 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:6): BDR message in message buffer
(probe0:ahc0:0:4:6): SCB 0x2 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0:A:4: no active SCB for reconnecting target - issuing BUS DEVICE RESET
SAVED_TCL == 0x40, ARG_1 == 0xff, SEQ_FLAGS == 0x0
(probe0:ahc0:0:4:7): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:7): BDR message in message buffer
(probe0:ahc0:0:4:7): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x153
SSTAT1 == 0x2
(probe0:ahc0:0:4:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
pass4 at ahc0 bus 0 target 6 lun 0
pass4: <UMAX Astra 600S V1.6> Fixed Scanner SCSI2 device
pass4: 3.300MB/s transfers
changing root device to da0s2a
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <SONY CD-R CDU926S 1.1e> Removable Worm SCSI2 device
cd0: 10.0MB/s transfers (10.0MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI2 device
da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI2 device
da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL_TM3200S 300N> Fixed Direct Access SCSI2 device
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 3067MB (6281856 512 byte sectors: 255H 63S/T 391C)
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
--==_Exmh_18489535640--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809220202.TAA00429>