Date: Thu, 29 Sep 2005 18:32:52 +0900 From: Byung-Hee HWANG <bh@izb.knu.ac.kr> To: Ariff Abdullah <skywizard@MyBSD.org.my> Cc: freebsd-multimedia@FreeBSD.org Subject: Re: kern/86557: [sound] Sound Card Volume isn't adjustable -- Intel ICH2 (82801BA) Message-ID: <20050929181716.0yyXA8yo2q.bh@izb.knu.ac.kr> In-Reply-To: <20050929125904.261bab48.skywizard@MyBSD.org.my> References: <200509260100.j8Q10R2G043475@freefall.freebsd.org> <20050926125430.pr80ifY7LN.bh@izb.knu.ac.kr> <20050929040933.5usk11veMc.bh@izb.knu.ac.kr> <20050929051412.18aea80f.skywizard@MyBSD.org.my> <20050929072458.vEbjhojUfJ.bh@izb.knu.ac.kr> <20050929114857.bzvt84u1Gb.bh@izb.knu.ac.kr> <20050929125904.261bab48.skywizard@MyBSD.org.my>
next in thread | previous in thread | raw e-mail | index | archive | help
--82I3+IH0IqGh5yIs Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Thu, Sep 29, 2005 at 12:59:04PM +0800, Ariff Abdullah wrote: > On Thu, 29 Sep 2005 12:13:49 +0900 > Byung-Hee HWANG <bh@izb.knu.ac.kr> wrote: > > On Thu, Sep 29, 2005 at 07:39:20AM +0900, Byung-Hee HWANG wrote: > > > On Thu, Sep 29, 2005 at 05:14:12AM +0800, Ariff Abdullah wrote: > > > > On Thu, 29 Sep 2005 04:19:53 +0900 > > > > Byung-Hee HWANG <bh@izb.knu.ac.kr> wrote: > > > > > Oh My God! > > > > > After patch, I found some problems. > > > > > 1. The Sound volume is weaker than before patch. > > > > > 2. Left speaker is not working. > > > > > > > > > > Thus I came back to the old kernel. > > > > > > > > > > > > > Oh my.. are you sure it was not because of your hardware/speaker? > > > > Use the patched kernel, sysctl hw.snd.maxautovchans=10 , sysctl > > > > hw.snd.pcm0.vchans=10 , see if that make any differences. > > > > > > > > Note: Make sure you applying that patch to a *real clean* sources. > > > > rm -f /usr/src/sys/sys/soundcard.h > > > > rm -rf /usr/src/sys/modules/sound/sound > > > > /usr/src/sys/dev/sound cvsup > > > > apply the patch > > > > .. if you're not sure. > > > > > > My hardware/speaker is not bad. > > > And.. I could not detect difference incident to sysctl's change. > > > > I found the reason that left speaker is not working. > > Yesterday my brother turned off left sound volume of GNOME Sound > > Control Panel. I fixed it. And sound volume be back correctly. > > > > I feel at home now. Thanks! > > > > sigh... :) All is good. This is a final report. I attatched a file(sys.txt, 33Kbytes). And.. I hope that the patch(latest feeder_volume implementation) is committed to -STABLE. Cheer up! -- Byung-Hee --82I3+IH0IqGh5yIs Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="sys.txt" viola# uname -a FreeBSD viola.izb.knu.ac.kr 5.4-STABLE FreeBSD 5.4-STABLE #0: Mon Sep 26 16:45:09 KST 2005 bh@viola.izb.knu.ac.kr:/usr/src/sys/i386/compile/II82801BA i386 viola# cat /usr/src/sys/i386/conf/II82801BA # II82801BA and GENERIC are the same file. # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.13 2005/04/02 16:37:58 scottl Exp $ machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident II82801BA # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for options device hptmv # Highpoint RocketRAID 182x device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device mlx # Mylex DAC960 family device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit ethernet device nge # NatSemi DP83820 gigabit ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device lnc # NE2100, NE32-VL Lance Ethernet cards device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface #device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) viola# dmesg real memory = 268369920 (255 MB) avail memory = 252952576 (241 MB) ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL845> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xdfefff00-0xdfefffff irq 17 at device 10.0 on pci3 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:6a:56:96:9f uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 22 at device 11.0 on pci3 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 23 at device 11.1 on pci3 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci3: <serial bus, USB> at device 11.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xe400-0xe41f irq 19 at device 31.2 on pci0 usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcm0: <Intel ICH2 (82801BA)> port 0xe800-0xe83f,0xec00-0xecff irq 17 at device 31.5 on pci0 pcm0: <Unknown AC97 Codec (id = 0x434d4983)> fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2423088304 Hz quality 800 Timecounters tick every 10.000 msec ad0: 5006MB <FUJITSU MPA3052ATU/9517> [10850/15/63] at ata0-master UDMA33 ad1: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: 28629MB <QUANTUM FIREBALLlct20 30/APL.0900> [58168/16/63] at ata0-slave UDMA100 acd0: CDROM <SAMSUNG CD-ROM SC-152G/C400> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a drm0: <ATI Radeon If R250 9000> port 0xc800-0xc8ff mem 0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 32MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 info: [drm] Loading R200 Microcode Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 done No buffers busy after final sync Uptime: 3m49s Shutting down ACPI Rebooting... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #0: Mon Sep 26 16:45:09 KST 2005 bh@viola.izb.knu.ac.kr:/usr/src/sys/i386/compile/II82801BA Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2423.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 268369920 (255 MB) avail memory = 252952576 (241 MB) ACPI APIC Table: <AMIINT INTEL845> ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL845> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xdfefff00-0xdfefffff irq 17 at device 10.0 on pci3 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:6a:56:96:9f uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 22 at device 11.0 on pci3 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 23 at device 11.1 on pci3 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci3: <serial bus, USB> at device 11.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xe400-0xe41f irq 19 at device 31.2 on pci0 usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcm0: <Intel ICH2 (82801BA)> port 0xe800-0xe83f,0xec00-0xecff irq 17 at device 31.5 on pci0 pcm0: <C-Media Electronics CMI9761 AC97 Codec> fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2423094368 Hz quality 800 Timecounters tick every 10.000 msec ad0: 5006MB <FUJITSU MPA3052ATU/9517> [10850/15/63] at ata0-master UDMA33 ad1: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: 28629MB <QUANTUM FIREBALLlct20 30/APL.0900> [58168/16/63] at ata0-slave UDMA100 acd0: CDROM <SAMSUNG CD-ROM SC-152G/C400> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a drm0: <ATI Radeon If R250 9000> port 0xc800-0xc8ff mem 0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 32MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 info: [drm] Loading R200 Microcode pid 870 (gnome-volume-contro), uid 1001: exited on signal 11 (core dumped) pid 504 (Xorg), uid 0: exited on signal 6 (core dumped) info: [drm] Loading R200 Microcode Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 done No buffers busy after final sync Uptime: 5h56m36s Shutting down ACPI Rebooting... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #0: Thu Sep 29 10:41:30 KST 2005 bh@viola.izb.knu.ac.kr:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <AMIINT INTEL845> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2423.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 268369920 (255 MB) avail memory = 252952576 (241 MB) ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL845> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xdfefff00-0xdfefffff irq 17 at device 10.0 on pci3 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:6a:56:96:9f uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 22 at device 11.0 on pci3 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 23 at device 11.1 on pci3 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci3: <serial bus, USB> at device 11.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xe400-0xe41f irq 19 at device 31.2 on pci0 usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcm0: <Intel ICH2 (82801BA)> port 0xe800-0xe83f,0xec00-0xecff irq 17 at device 31.5 on pci0 pcm0: <Unknown AC97 Codec (id = 0x434d4983)> fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2423090364 Hz quality 800 Timecounters tick every 10.000 msec ad0: 5006MB <FUJITSU MPA3052ATU/9517> [10850/15/63] at ata0-master UDMA33 ad1: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: 28629MB <QUANTUM FIREBALLlct20 30/APL.0900> [58168/16/63] at ata0-slave UDMA100 acd0: CDROM <SAMSUNG CD-ROM SC-152G/C400> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a drm0: <ATI Radeon If R250 9000> port 0xc800-0xc8ff mem 0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 32MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 info: [drm] Loading R200 Microcode Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 done No buffers busy after final sync Uptime: 2m57s Shutting down ACPI Rebooting... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #0: Mon Sep 26 16:45:09 KST 2005 bh@viola.izb.knu.ac.kr:/usr/src/sys/i386/compile/II82801BA Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2423.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 268369920 (255 MB) avail memory = 252952576 (241 MB) ACPI APIC Table: <AMIINT INTEL845> ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL845> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xdfefff00-0xdfefffff irq 17 at device 10.0 on pci3 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:6a:56:96:9f uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 22 at device 11.0 on pci3 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 23 at device 11.1 on pci3 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci3: <serial bus, USB> at device 11.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xe400-0xe41f irq 19 at device 31.2 on pci0 usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcm0: <Intel ICH2 (82801BA)> port 0xe800-0xe83f,0xec00-0xecff irq 17 at device 31.5 on pci0 pcm0: <C-Media Electronics CMI9761 AC97 Codec> fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2423089956 Hz quality 800 Timecounters tick every 10.000 msec ad0: 5006MB <FUJITSU MPA3052ATU/9517> [10850/15/63] at ata0-master UDMA33 ad1: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: 28629MB <QUANTUM FIREBALLlct20 30/APL.0900> [58168/16/63] at ata0-slave UDMA100 acd0: CDROM <SAMSUNG CD-ROM SC-152G/C400> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a drm0: <ATI Radeon If R250 9000> port 0xc800-0xc8ff mem 0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 32MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 info: [drm] Loading R200 Microcode viola# pciconf -lv agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24408086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA (ICH2) LPC Interface Controller' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x010180 card=0x24408086 chip=0x244b8086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA (ICH2) UltraATA/100 IDE Controller' class = mass storage subclass = ATA uhci2@pci0:31:2: class=0x0c0300 card=0x24408086 chip=0x24428086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller' class = serial bus subclass = USB pcm0@pci0:31:5: class=0x040100 card=0x97391849 chip=0x24458086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA/BAM (ICH2/ICH2-M) AC'97 Audio Controller' class = multimedia subclass = audio drm0@pci1:0:0: class=0x030000 card=0x00021002 chip=0x49661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RV250 Radeon 9000/9000 Pro' class = display subclass = VGA none0@pci1:0:1: class=0x038000 card=0x00031002 chip=0x496e1002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RV250 Radeon 9000/9000 Pro - Secondary' class = display rl0@pci3:10:0: class=0x020000 card=0x81391849 chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' class = network subclass = ethernet uhci0@pci3:11:0: class=0x0c0300 card=0x30381849 chip=0x30381106 rev=0x61 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB uhci1@pci3:11:1: class=0x0c0300 card=0x30381849 chip=0x30381106 rev=0x61 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB none1@pci3:11:2: class=0x0c0320 card=0x31041849 chip=0x31041106 rev=0x63 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6202 USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB viola# kldstat Id Refs Address Size Name 1 18 0xc0400000 5e56d0 kernel 3 1 0xc09ea000 587c vesa.ko 4 1 0xc0ab0000 59c4 snd_ich.ko 5 2 0xc0ab6000 236a4 sound.ko 6 15 0xc0ada000 58034 acpi.ko 7 1 0xc17ea000 6000 linprocfs.ko 8 1 0xc17f2000 16000 linux.ko 9 1 0xc185f000 3000 daemon_saver.ko 10 1 0xc1b12000 17000 radeon.ko viola# cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <Intel ICH2 (82801BA)> at io 0xec00, 0xe800 irq 17 bufsz 16384 kld snd_ich (1p/1s/1r/0v channels duplex default) --82I3+IH0IqGh5yIs--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050929181716.0yyXA8yo2q.bh>