Date: Mon, 21 Feb 2005 22:37:31 -0600 From: "Justin L. Boss" <justin@alt-network.com> To: freebsd-questions@freebsd.org Subject: Sound card on a Chaintech 7NJL6 Message-ID: <200502212237.31978.justin@alt-network.com>
next in thread | raw e-mail | index | archive | help
I just got a Chaintech 7NJL6 motherboard and two things are not working. SATA controller (works but only at 33 not 150) and AC'97 Sound. I knew the SATA would probably not work but the AC'97 Sound I expected to. I'm using the snd_ich.ko mod (the only one that works), and as soon as I log into KDE I get a high pitch sound. You can hear the normal sounds as well but the high pitch sound is very loud. I hope that someone else has ran into this before that might be able to shed some light on this. And as always Thanks in advance. Also here are the specs of the motherboard. Feature Highlights Form Factor ATX Form Factor 305mm x 210mm CPU Supports AMD Socket-A Athlon XP/Duron CPU System Clock supports 200/266/333/400MHz Chipset NVIDIA nForce2 Ultra 400 + MCPS Main Memory Three 184-pin DDR DIMMs up to 3GB Supports Dual-Channel DDR266/333/400 SDRAM modules Expansion Slots One AGP slot for 4X/8X AGP Five 32-Bit PCI slots (v2.2 compliant) Audio Subsystem With external high quality 5.1-Channel AC'97 Codec Complete software driver supports for Windows OS Optional S/PDIF out function UltraDMA IDE Ports Build-in nForce2 MCPS supports 2 UltraDMA-33/66/100/133 IDE ports Embedded USB Controller Build-in nForce2 MCPS supports total 8 USB 2.0/1.1 ports Supports USB 2.0 High-Speed Device @480 Mb/s Transfer Rates FDD Ports One FDD connector supports up to 2.88MB Boot-Block Flash ROM Award system BIOS support PnP, APM, DMI, ACPI, & Multi-device booting features Software Driver CD (Chipset Autodetect) Other Feature On-board LAN controller On-board LAN chip RTL8101L supports 10/100Mb Fast Ethernet Internal I/O connectors Three 3x1 pin fan connectors Three 5x2 pin USB connectors for additional 6 USB ports Optional 3x2 pin SPDIF connector for additional SPDIF-out adaptor 3x1 pin wake on LAN connector with housing 3x1 pin wake on Modem connector with housing Two 4x1 pin CD-in connectors 9x2 pin front panel connector 5x2 pin front side audio connector 20 pin ATX Power connector Rear Panel I/O ports One PS/2 Mouse and Keyboard port Two USB ports and one RJ45 connector Two 9-pin D-Sub male Serial ports One 25-pin D-Sub female Parallel port Three Audio I/O jacks (Line-in, Line-out and Mic-in) One 15-pin D-SUB female Game/MIDI port On-board SATA RAID controller Build-in nForce2 MCPS supports 2 serial ATA device for the highest data transfer rates(1.5Gbps burst) with RAID 0/1 solution
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200502212237.31978.justin>