Date: Wed, 6 Apr 2005 15:09:09 +0200 From: Divacky Roman <xdivac02@stud.fit.vutbr.cz> To: current@freebsd.org Subject: slow kbd input on 6-current on amd64@nforce3 Message-ID: <20050406130909.GA90294@stud.fit.vutbr.cz>
next in thread | raw e-mail | index | archive | help
as I have mentioned on the list I have very slow keyboard input. it might be
related to kbd not having an IRQ assigned. I repeat once again that it worked
on 5.3R.
I include verbose dmesg + this piece which didnt get into dmesg (dont know why):
(with atkbd.flags=0)
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
dmesg itself:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #8: Wed Apr 6 10:31:12 UTC 2005
root@sprava:/usr/obj/usr/src/sys/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80538000.
Calibrating clock(s) ... i8254 clock: 1193231 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1808810761 Hz
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.81-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000635000 - 0x000000000f837fff, 253767680 bytes (61955 pages)
avail memory = 252043264 (240 MB)
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80004804
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00e110de)
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x10de, dev=0x00e1, revid=0xa1
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00e0, revid=0xa2
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e800, size 5, enabled
map[20]: type 4, range 32, base 00004c00, size 6, enabled
map[24]: type 4, range 32, base 00004c40, size 6, enabled
found-> vendor=0x10de, dev=0x00e4, revid=0xa1
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fc003000, size 12, enabled
found-> vendor=0x10de, dev=0x00e7, revid=0xa1
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc004000, size 12, enabled
found-> vendor=0x10de, dev=0x00e7, revid=0xa1
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc005000, size 8, enabled
found-> vendor=0x10de, dev=0x00e8, revid=0xa2
bus=0, slot=2, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc000000, size 12, enabled
map[14]: type 4, range 32, base 0000a400, size 3, enabled
found-> vendor=0x10de, dev=0x00df, revid=0xa2
bus=0, slot=5, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a800, size 8, enabled
map[14]: type 4, range 32, base 0000ac00, size 7, enabled
map[18]: type 1, range 32, base fc001000, size 12, enabled
found-> vendor=0x10de, dev=0x00ea, revid=0xa1
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x10de, dev=0x00e5, revid=0xa2
bus=0, slot=8, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000009e0, size 3, enabled
map[14]: type 4, range 32, base 00000be0, size 2, enabled
map[18]: type 4, range 32, base 00000960, size 3, enabled
map[1c]: type 4, range 32, base 00000b60, size 2, enabled
map[20]: type 4, range 32, base 0000c800, size 4, enabled
found-> vendor=0x10de, dev=0x00ee, revid=0xa2
bus=0, slot=9, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000009f0, size 3, enabled
map[14]: type 4, range 32, base 00000bf0, size 2, enabled
map[18]: type 4, range 32, base 00000970, size 3, enabled
map[1c]: type 4, range 32, base 00000b70, size 2, enabled
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x10de, dev=0x00e3, revid=0xa2
bus=0, slot=10, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10de, dev=0x00e2, revid=0xa2
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00ed, revid=0xa2
bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0:1:1: Transition from D0 to D3
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0:2:0: Transition from D0 to D3
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pci0:2:1: Transition from D0 to D3
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0:2:2: Transition from D0 to D3
pci0: <bridge> at device 5.0 (no driver attached)
pci0:5:0: Transition from D0 to D3
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pci0:6:0: Transition from D0 to D3
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=50
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=ff stat1=10 devices=0x8<ATAPI_SLAVE>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f irq 11 at device 9.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc800
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0xd0 err=0x00 lsb=0x86 msb=0x78
ata2: stat0=0xd0 err=0x00 lsb=0x86 msb=0x78
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
atapci2: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f irq 10 at device 10.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
atapci2: [MPSAFE]
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
ata4: reset tp1 mask=03 ostat0=7f ostat1=7f
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=ff devices=0x0
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
pcib1: <PCI-PCI bridge> at device 11.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x8000-0x8fff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e0000000, size 28, enabled
pcib1: (null) requested memory range 0xe0000000-0xefffffff: good
map[14]: type 4, range 32, base 00008000, size 8, enabled
pcib1: (null) requested I/O range 0x8000-0x80ff: in range
map[18]: type 1, range 32, base f9000000, size 16, enabled
pcib1: (null) requested memory range 0xf9000000-0xf900ffff: good
found-> vendor=0x1002, dev=0x5157, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 14.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x9000-0x9fff
pcib2: memory decode 0xfa000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base fb001000, size 11, enabled
pcib2: (null) requested memory range 0xfb001000-0xfb0017ff: good
map[14]: type 4, range 32, base 00009000, size 7, enabled
pcib2: (null) requested I/O range 0x9000-0x907f: in range
found-> vendor=0x1106, dev=0x3044, revid=0x46
bus=2, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 00009400, size 8, enabled
pcib2: (null) requested I/O range 0x9400-0x94ff: in range
map[14]: type 1, range 32, base fb000000, size 8, enabled
pcib2: (null) requested memory range 0xfb000000-0xfb0000ff: good
found-> vendor=0x10ec, dev=0x8169, revid=0x10
bus=2, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
pci2: <serial bus, FireWire> at device 12.0 (no driver attached)
pci2:12:0: Transition from D0 to D3
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400
pcib2: re0 requested I/O range 0x9400-0x94ff: in range
pcib2: re0 requested I/O range 0x9400-0x94ff: in range
pcib2: re0 requested I/O range 0x9400-0x94ff: in range
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x9400-0x94ff mem 0xfb000000-0xfb0000ff irq 5 at device 13.0 on pci2
pcib2: re0 requested I/O range 0x9400-0x94ff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:11:09:d9:b6:61
re0: [MPSAFE]
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff,0xd2000-0xd2fff on isa0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 1808810761 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nVidia nForce3 Pro chip
acd0: setting UDMA33 on nVidia nForce3 Pro chip
acd0: <ATAPI CDROM/V120N> CDROM drive at ata0 as slave
acd0: 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 76319MB <Seagate ST380013AS 3.18> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
Trying to mount root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050406130909.GA90294>