Date: Thu, 07 Dec 2000 23:43:36 -0700 From: Janet Sullivan <eliyanah@redrivernet.com> To: Christopher Shumway <cshumway@bsdi.com>, freebsd-stable@freebsd.org Subject: Re: Intel PRO/100 (i82557) Server Adapter not seen by fxp. Message-ID: <3A308318.71A075E8@redrivernet.com> References: <Pine.BSF.4.21.0012072114310.40732-100000@pike.osd.bsdi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Christopher Shumway wrote:
> The Intelligent Server Adapter has a PCI ID of 0x5201. The driver code,
> /usr/src/sys/pci/if_fxpreg.h defines the device ID for the i82557 as
> 0x1030, which is of course not what this partitular card is.
>
> One idea would be to edit if_fxpreg.h and replace this line:
>
> #define FXP_DEVICEID_i82559 0x1030 /* New 82559 device id.. */
>
> With this line:
>
> #define FXP_DEVICEID_i82559 0x5201 /* New 82559 device id.. */
>
> and then recompile a kernel.
>
> It *may* Just Work[tm].
Unfortunately, it didn't. As soon as I tried to use ifconfig to give
the card an ip address, it locked the machine up solid. Upon reboot,
here is what ifconfig -a reports (fxp0 is the Intelligent Server
Adapter, fxp1 is an i82558).
ifconfig snippit:
fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
media: manual
supported media: manual
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.23.4 netmask 0xfffffff8 broadcast 192.168.23.7
ether 00:a0:c9:a0:ff:a4
media: 100baseTX <full-duplex> status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP
dmesg snippit:
fxp0: <Intel InBusiness 10/100 Ethernet> mem 0xe1000000-0xe11fffff irq 9
at devi
ce 18.1 on pci0
fxp0: Ethernet address 00:00:00:00:00:00
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xe800-0xe81f mem
0xe1200000-0xe12f
ffff,0xe1300000-0xe1300fff irq 3 at device 19.0 on pci0
fxp1: Ethernet address 00:a0:c9:a0:ff:a4
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A308318.71A075E8>