Date: Thu, 06 Apr 2000 20:48:21 -0700 From: Manfred Antar <mantar@pacbell.net> To: "Matthew N. Dodd" <winter@jurai.net>, current@FreeBSD.ORG Subject: Re: All PCI DPT adapter users! Message-ID: <4.3.1.2.20000406203931.00b826b0@pozo.com> In-Reply-To: <Pine.BSF.4.21.0004062251420.50194-100000@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
At 10:53 PM 4/6/2000 -0400, Matthew N. Dodd wrote: >I've just updated the DPT PCI front end to be 'newbus' compliant but lack >the hardware to test my changes. It should work just fine but I'd >appriciate a quick 'it works!' from someone with hardware just to be sure. It hangs here :( the boot gets to: dpt0 <DPT Caching SCSI RAID Controller> port 0xff80-0xff9f irq 16 at device11.0 on pci0 and just stalls. The controller is a DPT PM2124 with 2 4gig seagate drives in a RAID 1 setup. The motherboard is an Intel PR440FX Dual pentium pro with 2 200mhz cpu's I can't get to the debugger it just freezes. I removed the line options COMPAT_OLDPCI from my config file before I built the kernel that doesn't work Here is what comes up an my old kernel: dpt0: <DPT Caching SCSI RAID Controller> port 0xff80-0xff9f irq 16 at device 11.0 on pci0 dpt0: DPT PM2124A/9X-R FW Rev. 07CK, 1 channel, 64 CCBs dpt0: driver is using old-style compatability shims Manfred ===================== || mantar@pacbell.net || || Ph. (415) 681-6235 || ===================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.1.2.20000406203931.00b826b0>