Date: Wed, 21 Jun 2000 17:45:37 +0900 From: ynishimura@home.nimc.go.jp To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: freebsd-alpha@freebsd.org Subject: Re: SRM of Digital personal workstation can only works just with matrox ? Message-ID: <49256905.0030244B.00@cmnotesx.nimc.go.jp>
index | next in thread | raw e-mail
Dear Gallatin-san and sirs
>Remove the card & use a serial console.
I did and could enteredto SRM.
I did set pci_device_override -1
>>>
>>>ea.e9.e8.e7.e6.e5.e4.
Digital Personal WorkStation 600au Console V6.5-145
built on Aug 28 1997 at 15:40:03
>>>set pci_device_override -1
>>>show pci*
pci_device_override ffffffff
pci_parity off
>>>
After then, I rebooted the system, but the situation did not changed.
>You can also try putting the card into one of the 32-bit slots (those
>are the 3 narrow slots).
I moved the display card(Powerstorm) to 32bit slots.
The system booted succesfuly. But, In booting second floppy(mfsroot.flp), it
became panic.
I changed Displaycard from pstorm to matrox and did set pci_device_override 0,
and move displaycard to 64bits.
The system booted successfuly and became installed with FreeBSD4.0/Alpha.
It is very strange for me. After installation, I will try Pstorm,again.
Thank you very much.
Sincerely
Y.NISHIMURA
P.S.
Test result of boot to SRM(pci_device_override=-1)
Display Card Slot4(64bits PCI) Slot3(32bits)
PStorm NG OK
Matrox OK OK
Test result of boot of freebsd
Display Card pci_device_override=0 pci_device_override=-1
PStorm(Slot3) NG NG
Matrox (slot4) OK OK
Now, I am using the system with matrox and pci_device_override=0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49256905.0030244B.00>