Date: Thu, 12 Apr 2001 07:23:14 -0500 From: "David W. Chapman Jr." <dwcjr@inethouston.net> To: "Jeff Love" <jl@burghcom.com>, <freebsd-stable@freebsd.org> Subject: Re: Problems with 3c905B and 4.3-RC Message-ID: <045c01c0c34b$588d6980$931576d8@inethouston.net> References: <3AD4CBC3.F3E79AFC@rtci.com> <01041208131800.29806@merlin>
next in thread | previous in thread | raw e-mail | index | archive | help
No, he solved the problem already by setting pnp OS to off I believe. ----- Original Message ----- From: "Jeff Love" <jl@burghcom.com> To: <freebsd-stable@freebsd.org> Sent: Thursday, April 12, 2001 7:11 AM Subject: Re: Problems with 3c905B and 4.3-RC > Not sure if this is the problem in your case, but did you include 'device > miibus' to your kernel config? This was a fairly recent addition needed for > 3com nics. > -- > Jeff Love > jl@burghcom.com > ----------------- > Burgh-Com > > On Wed, 11 Apr 2001, Jeremy Hopkins wrote: > > I have just installed a FreeBSD 4.1.1-RELEASE box. I had to start there > > as my 3c905B card did not show in an ifconfig -a using newer floppies so > > I reverted to 4.1.1 I got the box up and running and did a cvsup to > > 4.3-RC, made/installed world and kernel just fine. However I notice I > > have no network interface at xl0 like I did before the reboot into > > 4.3-RC. > > > > xl0 shows up in dmesg but I get error messages along with it. > > > > xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 15.0 on pci0 > > xl0: couldn't map ports/memory > > device_probe_and_attach: xl0 attach returned 6 > > > > I had also had the same error messages about my sound card pcm0. I have > > removed the sound card to eliminate the possibility these are > > conflicting, and the dmesg below is without the sound card in the > > system. It appears there was some talk about this back in Sept. 2000 in > > the -current list, but I can't seem to find a resolution on it. > > > > Thanks in advance, > > > > Jeremy > > -- > > Jeremy Hopkins > > Systems Administrator > > www.icc.net www.rtci.com > > For those who like this sort of thing, this is the sort of thing they > > like. -- Abraham Lincoln > > > > > > > > below is copy of full dmesg output- > > ------------------------------ > > Copyright (c) 1992-2001 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights > > reserved. > > FreeBSD 4.3-RC #0: Wed Apr 11 18:50:15 GMT 2001 > > root@shadow.ghettoweb.net:/usr/obj/usr/src/sys/GUNSHOT > > Timecounter "i8254" frequency 1193182 Hz > > CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x673 Stepping = 3 > > > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR,SSE> > > real memory = 134217728 (131072K bytes) > > avail memory = 126545920 (123580K bytes) > > Preloaded elf kernel "kernel" at 0xc03e1000. > > Pentium Pro MTRR support enabled > > md0: Malloc disk > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > > pci0: <PCI bus> on pcib0 > > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on > > pci0 > > pci1: <PCI bus> on pcib1 > > pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11 > > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel PIIX4 ATA33 controller> port 0x1000-0x100f at device 7.1 > > on pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq > > 9 at device 7.2 on pci0 > > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at > > device 7.3 on pci0 > > xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 15.0 on pci0 > > xl0: couldn't map ports/memory > > device_probe_and_attach: xl0 attach returned 6 > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > > isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model IntelliMouse, device ID 3 > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > > isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/8 bytes threshold > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > IPsec: Initialized Security Association Processing. > > ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA33 > > ad1: 9787MB <WDC WD102AA> [19885/16/63] at ata0-slave UDMA33 > > acd0: CDROM <CRD-8483B> at ata1-master using PIO4 > > afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave using PIO3 > > Mounting root from ufs:/dev/ad0s1a > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > -- > Jeff Love > jl@burghcom.com > ----------------- > Burgh-Com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?045c01c0c34b$588d6980$931576d8>