Date: Mon, 17 Apr 2023 07:38:56 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 268229] Logical drives regression with mpr(4) driver Message-ID: <bug-268229-227-RWuk4HWUjX@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-268229-227@https.bugs.freebsd.org/bugzilla/> References: <bug-268229-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D268229 cin_nev@mail.ru changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |cin_nev@mail.ru --- Comment #4 from cin_nev@mail.ru --- RELENG-12.3 not support, but I can not upgrade to RELENG-12.4, because I ha= ve got same issue after upgrade to RELENG-12.4. What can I do to solve this is= sue? Information about hardware (commands ran on RELENG-12.3): root@host:~ # mprutil show all Adapter: mpr0 Adapter: Board Name: Asus SAS3008 Board Assembly: Chip Name: LSISAS3008 Chip Revision: ALL BIOS Revision: 8.35.00.00 Firmware Revision: 15.00.04.00 Integrated RAID: yes SATA NCQ: ENABLED PCIe Width/Speed: x8 (8.0 GB/sec) IOC Speed: Full Temperature: 53 C PhyNum CtlrHandle DevHandle Disabled Speed Min Max Device 0 0001 0009 N 6.0 3.0 12 SAS Initiator 1 0002 000a N 6.0 3.0 12 SAS Initiator 2 0003 000b N 6.0 3.0 12 SAS Initiator 3 0004 000c N 6.0 3.0 12 SAS Initiator 4 N 3.0 12 SAS Initiator 5 N 3.0 12 SAS Initiator 6 N 3.0 12 SAS Initiator 7 N 3.0 12 SAS Initiator Devices: B____T SAS Address Handle Parent Device Speed Enc Slot = Wdt 00 02 4433221100000000 0009 0001 SATA Target 6.0 0001 00 = 1 00 03 4433221101000000 000a 0002 SATA Target 6.0 0001 01 = 1 00 04 4433221102000000 000b 0003 SATA Target 6.0 0001 02 = 1 00 05 4433221103000000 000c 0004 SATA Target 6.0 0001 03 = 1 Enclosures: Slots Logical ID SEPHandle EncHandle Type 08 500112f950000f70 0001 Direct Attached SGPIO Expanders: NumPhys SAS Address DevHandle Parent EncHandle SAS Level root@host:~ # dmesg | grep mpr0 mpr0: <Avago Technologies (LSI) SAS3008> port 0x6000-0x60ff mem 0x94240000-0x9424ffff,0x94200000-0x9423ffff irq 16 at device 0.0 on pci1 mpr0: Firmware: 15.00.04.00, Driver: 23.00.00.00-fbsd mpr0: IOCCapabilities: 6985c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR,MSIXIndex,FastPath,= RDPQArray> mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 0 mpr0: At enclosure level 0 and connector name ( ) mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 1 mpr0: At enclosure level 0 and connector name ( ) mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b> enclosureHandle<0x0001> slot 2 mpr0: At enclosure level 0 and connector name ( ) mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c> enclosureHandle<0x0001> slot 3 mpr0: At enclosure level 0 and connector name ( ) da0 at mpr0 bus 0 scbus0 target 0 lun 0 da1 at mpr0 bus 0 scbus0 target 1 lun 0 root@host:~ # dmesg | grep da0 Trying to mount root from ufs:/dev/da0p2 [rw]... da0 at mpr0 bus 0 scbus0 target 0 lun 0 da0: <LSI Logical Volume 3000> Fixed Direct Access SPC-4 SCSI device da0: Serial Number 3978164406233064500 da0: 150.000MB/s transfers da0: Command Queueing enabled da0: 456809MB (935544832 512 byte sectors) --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-268229-227-RWuk4HWUjX>