Date: Thu, 27 Jan 2000 10:27:02 -0800 From: Mike Smith <msmith@freebsd.org> To: Soren Schmidt <sos@freebsd.dk> Cc: ak@freenet.co.uk (Alex), current@FreeBSD.ORG Subject: Re: My ATAPI CD not come ready Message-ID: <200001271827.KAA02470@mass.cdrom.com> In-Reply-To: Your message of "Thu, 27 Jan 2000 08:36:06 %2B0100." <200001270736.IAA33837@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
JFWIW, this sounds like something that I "fixed" in the old wd driver, where a device 'echoed' on the bus after it was deselected. Increasing the timeout between deselecting the device and trying to talk again to the bus was, AFAIR, the workaround then. > It seems Alex wrote: > > > > OK - here's the part relevant to ata: > > > > > > ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xfcf0-0xfcff at device > > 1.1 on pci0 > > ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 > > ata0: mask=03 status0=50 status1=00 > > ata0: mask=03 status0=50 status1=00 > > ata0: devices = 0x1 > > ata0 at 0x01f0 irq 14 on ata-pci0 > > ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 > > ata1: mask=03 status0=00 status1=00 > > ata1: mask=03 status0=00 status1=00 > > ata1: devices = 0xc > > Here it sees two devices, apparently you cdrom is reacting both on > master AND slave addresses :( > > > ata1-slave: ata_command: timeout waiting for intr > > ata1-slave: identify failed > > But when we try to talk to it it fails... > > > ata0-master: success setting up UDMA2 mode on PIIX4 chip > > But when we try to talk to it it fails... > > > Any ideas? > > I'll try to come up with a patch that solves this... > > -Søren > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > -- \\ Give a man a fish, and you feed him for a day. \\ Mike Smith \\ Tell him he should learn how to fish himself, \\ msmith@freebsd.org \\ and he'll hate you for a lifetime. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200001271827.KAA02470>