Date: Mon, 29 Dec 2008 13:59:12 +0100 (CET) From: Matthias Andree <matthias.andree@gmx.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/130021: Switching CAPS/NUM LOCK or virtual terminal freezes computer (audio) for some time Message-ID: <20081229125912.2C8B918A3B@merlin.emma.line.org> Resent-Message-ID: <200812291300.mBTD01pp011066@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 130021
>Category: kern
>Synopsis: Switching CAPS/NUM LOCK or virtual terminal freezes computer (audio) for some time
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Dec 29 13:00:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator: Matthias Andree
>Release: FreeBSD 7.1-PRERELEASE i386
>Organization:
>Environment:
System: FreeBSD merlin.emma.line.org 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #8: Tue Dec 23 12:15:14 CET 2008 root@merlin.emma.line.org:/usr/obj/usr/src/sys/MA7 i386
>Description:
Switching virtual consoles or keyboard qualifiers such as CAPS LOCK, or NUM
LOCK, freezes my computer for a fraction of a seconds. This causes hard disk
and audio to stall and mute (if displaying text consoles) or make snarling
noises (if displaying X11).
I have a USB keyboard. dmesg below with angle brackets replaced by parentheses,
but first my kernel configuration:
##############################
$ cat /sys/i386/conf/MA7
include GENERIC
ident MA7
nomakeoption DEBUG
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_PRIQ
options INCLUDE_CONFIG_FILE
##############################
$ dmesg | tr '<>' '()'
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #8: Tue Dec 23 12:15:14 CET 2008
root@merlin.emma.line.org:/usr/obj/usr/src/sys/MA7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2500+ (1822.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff(FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE)
AMD Features=0xc0400800(SYSCALL,MMX+,3DNow!+,3DNow!)
real memory = 1073721344 (1023 MB)
avail memory = 1028263936 (980 MB)
ACPI APIC Table: (ASUS A7V600-X)
ioapic0: Changing APIC ID to 2
ioapic0 (Version 0.3) irqs 0-23 on motherboard
bktr_mem: memory holder loaded
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: (ASUS A7V600-X) on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: (32-bit timer at 3.579545MHz) port 0xe408-0xe40b on acpi0
acpi_button0: (Power Button) on acpi0
pcib0: (ACPI Host-PCI bridge) port 0xcf8-0xcff on acpi0
pci0: (ACPI PCI bus) on pcib0
agp0: (VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge) on hostb0
agp0: aperture size is 128M
pcib1: (ACPI PCI-PCI bridge) at device 1.0 on pci0
pci1: (ACPI PCI bus) on pcib1
vgapci0: (VGA-compatible display) mem 0xe5000000-0xe5ffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
nvidia0: (GeForce FX 5200) on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
xl0: (3Com 3c905-TX Fast Etherlink XL) port 0xd800-0xd83f at device 10.0 on pci0
miibus0: (MII bus) on xl0
nsphy0: (DP83840 10/100 media interface) PHY 24 on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:60:97:bc:c5:f4
xl0: [ITHREAD]
sym0: (895) port 0xd400-0xd4ff mem 0xe4800000-0xe48000ff,0xe4000000-0xe4000fff irq 16 at device 13.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: [ITHREAD]
bktr0: (BrookTree 878) mem 0xe7000000-0xe7000fff at device 14.0 on pci0
bktr0: [GIANT-LOCKED]
bktr0: [ITHREAD]
bktr0: Hauppauge Model 61324 D129
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote control.
pci0: (multimedia) at device 14.1 (no driver attached)
atapci0: (VIA 6420 SATA150 controller) port 0xd000-0xd007,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: (ATA channel 0) on atapci0
ata2: [ITHREAD]
ata3: (ATA channel 1) on atapci0
ata3: [ITHREAD]
atapci1: (VIA 8237 UDMA133 controller) port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa000-0xa00f irq 20 at device 15.1 on pci0
ata0: (ATA channel 0) on atapci1
ata0: [ITHREAD]
ata1: (ATA channel 1) on atapci1
ata1: [ITHREAD]
uhci0: (VIA 83C572 USB controller) port 0x9800-0x981f at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: (VIA 83C572 USB controller) on uhci0
usb0: USB revision 1.0
uhub0: (VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1) on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: (VIA 83C572 USB controller) port 0x9400-0x941f at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: (VIA 83C572 USB controller) on uhci1
usb1: USB revision 1.0
uhub1: (VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1) on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: (VIA 83C572 USB controller) port 0x9000-0x901f at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: (VIA 83C572 USB controller) on uhci2
usb2: USB revision 1.0
uhub2: (VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1) on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: (VIA 83C572 USB controller) port 0x8800-0x881f at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: (VIA 83C572 USB controller) on uhci3
usb3: USB revision 1.0
uhub3: (VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1) on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: (VIA VT6202 USB 2.0 controller) mem 0xe3800000-0xe38000ff at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: (VIA VT6202 USB 2.0 controller) on ehci0
usb4: USB revision 2.0
uhub4: (VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1) on usb4
uhub4: 8 ports with 8 removable, self powered
uhub5: (vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2) on uhub4
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
ubt0: (Broadcom Corp ANYCOM USB-200 ROM, class 224/1, rev 2.00/3.41, addr 3) on uhub5
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294
umass0: (Generic USB2.0 Card Reader, class 0/0, rev 2.00/1.9c, addr 4) on uhub5
isab0: (PCI-ISA bridge) at device 17.0 on pci0
isa0: (ISA bus) on isab0
pcm0: (VIA VT8237) port 0xe000-0xe0ff at device 17.5 on pci0
pcm0: [ITHREAD]
pcm0: (Analog Devices AD1980 AC97 Codec)
pcm0: (VIA DXS Enabled: DXS 4 / SGD 1 / REC 1)
vr0: (VIA VT6102 Rhine II 10/100BaseTX) port 0x8400-0x84ff mem 0xe3000000-0xe30000ff at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x78
miibus1: (MII bus) on vr0
rlphy0: (RTL8201L 10/100 media interface) PHY 1 on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0e:a6:1d:48:f4
vr0: [ITHREAD]
uhci4: (VIA 83C572 USB controller) port 0x8000-0x801f at device 19.0 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: (VIA 83C572 USB controller) on uhci4
usb5: USB revision 1.0
uhub6: (VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1) on usb5
uhub6: 2 ports with 2 removable, self powered
uhci5: (VIA 83C572 USB controller) port 0x7800-0x781f at device 19.1 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: (VIA 83C572 USB controller) on uhci5
usb6: USB revision 1.0
uhub7: (VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1) on usb6
uhub7: 2 ports with 2 removable, self powered
ehci1: (VIA VT6202 USB 2.0 controller) mem 0xe2800000-0xe28000ff at device 19.2 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb5 usb6
usb7: (VIA VT6202 USB 2.0 controller) on ehci1
usb7: USB revision 2.0
uhub8: (VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1) on usb7
uhub8: 4 ports with 4 removable, self powered
fwohci0: (VIA Fire II (VT6306)) port 0x7400-0x747f mem 0xe2000000-0xe20007ff at device 19.3 on pci0
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:06:66:45:55:5e:9b
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: (IEEE1394(FireWire) bus) on fwohci0
fwe0: (Ethernet over FireWire) on firewire0
if_fwe0: Fake Ethernet address: 02:11:06:55:5e:9b
fwe0: Ethernet address: 02:11:06:55:5e:9b
fwip0: (IP over FireWire) on firewire0
fwip0: Firewire address: 00:11:06:66:45:55:5e:9b @ 0xfffe00000000, S400, maxrec 2048
sbp0: (SBP-2/SCSI over FireWire) on firewire0
dcons_crom0: (dcons configuration ROM) on firewire0
dcons_crom0: bus_addr 0x1bf8000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
fdc0: (floppy drive controller) port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: (1440-KB 3.5" drive) on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: (16550A-compatible COM port) port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: (ACPI CPU) on acpi0
pmtimer0 on isa0
orm0: (ISA Option ROM) at iomem 0xd0000-0xd6fff pnpid ORM0000 on isa0
atkbdc0: (Keyboard controller (i8042)) at port 0x60,0x64 on isa0
atkbd0: (AT Keyboard) irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: (Parallel port) at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: (Parallel port bus) on ppc0
ppbus0: [ITHREAD]
plip0: (PLIP network interface) on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: (Printer) on ppbus0
lpt0: Interrupt-driven port
ppi0: (Parallel I/O) on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: (System console) at flags 0x100 on isa0
sc0: VGA (16 virtual consoles, flags=0x300)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: (Generic ISA VGA) at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: (Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/24.30, addr 2) on uhub0
ums0: 8 buttons and Z dir.
ukbd0: (Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 2) on uhub2
kbd2 at ukbd0
uhid0: (Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 2) on uhub2
Timecounter "TSC" frequency 1822514837 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop (= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
Waiting 5 seconds for SCSI devices to settle
acd0: DVDR (NEC DVD RW ND-4550A/1.08) at ata0-master UDMA33
ad4: 238475MB (MAXTOR STM3250310AS 3.AAA) at ata2-master SATA150
ad6: 476940MB (WDC WD5000AAJS-00YFA0 12.01C02) at ata3-master SATA150
GEOM_LABEL: Label for provider ad4s1 is msdosfs/ .
GEOM_JOURNAL: Journal 2543417790: ad4s2d contains data.
GEOM_JOURNAL: Journal 2543417790: ad4s2d contains journal.
GEOM_JOURNAL: Journal ad4s2d clean.
GEOM_JOURNAL: Journal 4108131987: ad4s2f contains data.
GEOM_JOURNAL: Journal 4108131987: ad4s2f contains journal.
GEOM_JOURNAL: Journal ad4s2f clean.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: (Generic IC1210 CF 1.9C) Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
sa0 at sym0 bus 0 target 6 lun 0da1 at umass-sim0 bus 0 target 0 lun 1
da1: (Generic IC1210 MS 1.9C) Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
sa0: (TANDBERG TDC 4222 =07:) Removable Sequential Access SCSI-2 device
sa0: 4.807MB/s transfers (4.807MHz, offset 8)
sa1 at sym0 bus 0 target 12 lun 0
sa1: (TANDBERG SLR6 0404) Removable Sequential Access SCSI-2 device
sa1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da2 at umass-sim0 bus 0 target 0 lun 2
da2: (Generic IC1210 MMC/SD 1.9C) Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 0 lun 0
cd1: (_NEC DVD_RW ND-4550A 1.08) Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: (Generic IC1210 SM 1.9C) Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
cd0 at sym0 bus 0 target 2 lun 0
cd0: (PLEXTOR CD-ROM PX-32TS 1.02) Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s2a
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
fuse4bsd: compiled against kernel config /usr/obj/usr/src/sys/MA7
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081229125912.2C8B918A3B>