Date: Sat, 30 Jul 2016 16:39:40 -0700 From: Mark Millard <markmi@dsl-only.net> To: freebsd-stable@freebsd.org, freebsd-arm <freebsd-arm@freebsd.org> Subject: BETA3 new message on rpi2 boot (just one boot?): dhclient[836]: send_packet: No buffer space available Message-ID: <15DC680E-7CED-4522-930B-EABF2C7EFA72@dsl-only.net>
next in thread | raw e-mail | index | archive | help
[This appears to be something that does not repeat (often?) but I = figured I'd mention it.] I've not seen this send_packet report before the first BETA3 boot: > # dmesg -a | tail > Configuring vt: blanktime. > Performing sanity check on sshd configuration. > Starting sshd. > Starting cron. > Starting background file system checks in 60 seconds. > =20 > Sat Jul 30 16:14:32 PDT 2016 > wlan0: link state changed to UP > Jul 30 16:14:35 rpi2 dhclient[836]: send_packet: No buffer space = available > Jul 30 16:15:08 rpi2 login: ROOT LOGIN (root) ON ttyu0 Trying shutdown -r now again to see if it repeated shows that it did = not. So far I do not see later problems in the first or later boots. Context: > # uname -apKU > FreeBSD rpi2 11.0-BETA3 FreeBSD 11.0-BETA3 #2 r303469M: Fri Jul 29 = 19:09:12 PDT 2016 = markmi@FreeBSDx64:/usr/obj/clang/arm.armv6/usr/src/sys/RPI2-NODBG arm=20= > armv6 1100120 1100120 FYI: > ue0: link state changed to DOWN > ue0: link state changed to UP > Starting Network: lo0 ue0. > lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128=20 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1=20 > inet 127.0.0.1 netmask 0xff000000=20 > groups: lo=20 > nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> > ue0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 > options=3D80009<RXCSUM,VLAN_MTU,LINKSTATE> > ether b8:27:eb:5e:35:df > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > Starting devd. > urtwn0: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr = 4> on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > Starting dhclient. > DHCPREQUEST on ue0 to 255.255.255.255 port 67 > DHCPACK from 192.168.0.1 > bound to 192.168.0.119 -- renewal in 15768000 seconds. > wlan0: Ethernet address: 00:e0:4c:1d:49:24 > Created wlan(4) interfaces: wlan0. > Starting wpa_supplicant. > Starting Network: wlan0. > wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 = mtu 1500 > ether 00:e0:4c:1d:49:24 > groups: wlan=20 > ssid "" channel 1 (2412 MHz 11b) > regdomain FCC country US authmode WPA1+WPA2/802.11i privacy = MIXED > deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 wme roaming = MANUAL > bintval 0 > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > add host 127.0.0.1: gateway lo0 fib 0: route already in table > add host ::1: gateway lo0 fib 0: route already in table > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > Generating host.conf. =3D=3D=3D Mark Millard markmi at dsl-only.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15DC680E-7CED-4522-930B-EABF2C7EFA72>