Date: Thu, 6 Dec 2007 12:01:21 GMT From: Andrey Sudakov <cub0head@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/118459: Freeze under high-load with SMP until keypressed Message-ID: <200712061201.lB6C1Lgu007821@www.freebsd.org> Resent-Message-ID: <200712061210.lB6CA2GN058724@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 118459
>Category: misc
>Synopsis: Freeze under high-load with SMP until keypressed
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Dec 06 12:10:02 UTC 2007
>Closed-Date:
>Last-Modified:
>Originator: Andrey Sudakov
>Release: FreeBSD 6.2
>Organization:
Kaspersky labs
>Environment:
>Description:
Under very high load (no CPU %idle time, high %interrupt(network) or %system (context switching) time) server sometimes completly stops: no processes are running (i see no logs entries), no network responses (no ping responses). When any key on console is hit server unfreezes and continues to work untill it freezes again. The problem shows only when SMP is enabled in kernel. Without SMP option everything works fine. The problem persist in a varios hardware configurations (i386, amd64) at least on IBM servers (x3650, x3250) or some Supermicro Pentium D machines.
==============
amd64 IBM x3650:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p8 #4: Fri Nov 16 13:32:35 MSK 2007
root@www8.doamin.com:/usr/obj/usr/src/sys/WWW8
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz (2660.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 9663676416 (9216 MB)
avail memory = 8287969280 (7904 MB)
ACPI APIC Table: <IBM SERVALNT>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <IBM SERVALNT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
cpu4: <ACPI CPU> on acpi0
acpi_throttle4: <ACPI CPU Throttling> on cpu4
acpi_throttle4: failed to attach P_CNT
device_attach: acpi_throttle4 attach returned 6
cpu5: <ACPI CPU> on acpi0
acpi_throttle5: <ACPI CPU Throttling> on cpu5
acpi_throttle5: failed to attach P_CNT
device_attach: acpi_throttle5 attach returned 6
cpu6: <ACPI CPU> on acpi0
acpi_throttle6: <ACPI CPU Throttling> on cpu6
acpi_throttle6: failed to attach P_CNT
device_attach: acpi_throttle6 attach returned 6
cpu7: <ACPI CPU> on acpi0
acpi_throttle7: <ACPI CPU Throttling> on cpu7
acpi_throttle7: failed to attach P_CNT
device_attach: acpi_throttle7 attach returned 6
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci26: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci26
pci27: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci27
pci28: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci27
pci36: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.3 on pci26
pci37: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib6
aac0: <IBM ServeRAID-8k> port 0x5000-0x50ff mem 0xc9e00000-0xc9ffffff,0xc7fe0000-0xc7ffffff irq 17 at device 0.0 on pci4
aac0: Enabling 64-bit address support
aac0: New comm. interface enabled
aac0: Adaptec Raid Controller 2.0.0-1
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 5.0 on pci0
pci69: <PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci7: <ACPI PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 7.0 on pci0
pci68: <PCI bus> on pcib10
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib12
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2), v0.9.6> mem 0xce000000-0xcfffffff irq 16 at device 0.0 on pci3
bce0: ASIC ID 0x57081020; Revision (B2); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bce0: Ethernet address: 00:1a:64:63:a7:71
bce0: [GIANT-LOCKED]
pcib13: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci5: <ACPI PCI bus> on pcib13
pcib14: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib14
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2), v0.9.6> mem 0xca000000-0xcbffffff irq 17 at device 0.0 on pci6
bce1: ASIC ID 0x57081020; Revision (B2); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bce1: Ethernet address: 00:1a:64:63:a7:73
bce1: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0x2200-0x221f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x2600-0x261f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x2a00-0x2a1f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x2e00-0x2e1f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib15: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib15
pci1: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x480-0x48f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Cypress Cypress USB Keyboard / PS2 Mouse, rev 1.00/0.01, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Cypress Cypress USB Keyboard / PS2 Mouse, rev 1.00/0.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd1: IBM IBM RSA2, rev 1.10/0.01, addr 2, iclass 3/1
kbd3 at ukbd1
ums1: IBM IBM RSA2, rev 1.10/0.01, addr 2, iclass 3/1
ums1: X report 0x0002 not supported
device_attach: ums1 attach returned 6
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-T10N/1.00> at ata1-master UDMA33
aacd0: <RAID 0/1> on aac0
aacd0: 858000MB (1757184000 sectors)
ipmi0: IPMI device rev. 0, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 3
ipmi0: Attached watchdog
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
Trying to mount root from ufs:/dev/aacd0s1a
>How-To-Repeat:
My test server freeze after 8 days 'stress' with ~1000 load average.
>Fix:
Not to use SMP on high-load
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200712061201.lB6C1Lgu007821>