Date: Tue, 2 Nov 2004 16:21:46 +0200 From: Dan Cojocar <dan.cojocar@gmail.com> To: Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw> Cc: freebsd-current@freebsd.org Subject: Re: -CURRENT booting locks up during EHCI detection Message-ID: <b37cb09704110206215b0be5cc@mail.gmail.com> In-Reply-To: <0410282203035.15747@www.mmlab.cse.yzu.edu.tw> References: <0410282203035.15747@www.mmlab.cse.yzu.edu.tw>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 28 Oct 2004 22:04:03 +0800 (CST), Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw> wrote: > Motherboard: MSI 865PE Neo2 > -CURRENT cvsup'ed about 3 days ago, SCHED_4BSD, no PREEMPTION. > > Sometime it froze during boot(see following dmesg for the freeze point), > right after ehci0 was deteceted: No panic, hard lock up, manually escape > to debugger doesn't work since the keyboard doesn't respond anymore. > > Following are the verbose booting message while successful booting. > Search for "freeze" to locate the freeze point. > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-CURRENT #0: Mon Oct 25 17:26:21 CST 2004 > root@bsd.ethome.com.tw:/usr/src/sys/i386/compile/bsd > Preloaded elf kernel "/boot/kernel/kernel" at 0xc07e6000. > Preloaded splash_image_data "/boot/chuck1.bmp" at 0xc07e626c. > Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc07e62bc. > Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07e6368. > Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07e6414. > Preloaded elf module "/boot/kernel/sound.ko" at 0xc07e64c0. > Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc07e656c. > Preloaded elf module "/boot/kernel/usb.ko" at 0xc07e6618. > Preloaded elf module "/boot/kernel/ums.ko" at 0xc07e66c0. > Preloaded elf module "/boot/kernel/umass.ko" at 0xc07e6768. > Preloaded elf module "/boot/kernel/agp.ko" at 0xc07e6814. > Table 'FACP' at 0x1fff0030 > Table 'APIC' at 0x1fff00c0 > MADT: Found table at 0x1fff00c0 > MP Configuration Table version 1.4 found at 0xc00f60d0 > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 1: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 2: enabled > SMP: Added CPU 1 (AP) > ACPI APIC Table: <AMIINT INTEL865> > Calibrating clock(s) ... i8254 clock: 1193207 Hz > Timecounter "i8254" frequency 1193207 Hz quality 0 > Calibrating TSC clock ... TSC clock: 2434149468 Hz > CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2434.15-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 536805376 (511 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000829000 - 0x000000001f6b3fff, 518565888 bytes (126603 pages) > avail memory = 519737344 (495 MB) > APIC ID: physical 0, logical 0:0 > APIC ID: physical 1, logical 0:1 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > bios32: Found BIOS32 Service Directory header at 0xc00fdb50 > bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xdb81 > pnpbios: Found PnP BIOS data at 0xc00f7540 > pnpbios: Entry = f0000:632f Rev = 1.0 > Other BIOS signatures found: > APIC: CPU 0 has ACPI ID 1 > APIC: CPU 1 has ACPI ID 2 > MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > ioapic0: intpin 0 -> ExtINT (edge, high) > ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) > ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) > ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) > ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) > ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) > ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) > ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) > ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) > ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) > ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) > ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) > ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) > ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) > ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) > ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) > ioapic0: intpin 16 -> PCI IRQ 16 (level, low) > ioapic0: intpin 17 -> PCI IRQ 17 (level, low) > ioapic0: intpin 18 -> PCI IRQ 18 (level, low) > ioapic0: intpin 19 -> PCI IRQ 19 (level, low) > ioapic0: intpin 20 -> PCI IRQ 20 (level, low) > ioapic0: intpin 21 -> PCI IRQ 21 (level, low) > ioapic0: intpin 22 -> PCI IRQ 22 (level, low) > ioapic0: intpin 23 -> PCI IRQ 23 (level, low) > MADT: intr override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > ioapic0: intpin 2 trigger: edge > ioapic0: intpin 2 polarity: high > MADT: intr override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > ioapic0: intpin 9 polarity: high > ioapic0 <Version 2.0> irqs 0-23 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > random: <entropy source, Software, Yarrow> > io: <I/O> > mem: <memory> > Pentium Pro MTRR support enabled > null: <null device, zero device> > acpi0: <AMIINT INTEL865> on motherboard > acpi0: [MPSAFE] > pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086) > pcibios: BIOS version 2.10 > Found $PIR table, 14 entries at 0xc00f7b70 > PCI-Only Interrupts: none > Location Bus Device Pin Link IRQs > embedded 0 1 A 0x60 3 4 6 7 10 11 12 14 15 > embedded 0 1 B 0x61 3 4 6 7 10 11 12 14 15 > embedded 0 2 A 0x60 3 4 6 7 10 11 12 14 15 > embedded 0 3 B 0x62 3 4 6 7 10 11 12 14 15 > embedded 0 29 A 0x60 3 4 6 7 10 11 12 14 15 > embedded 0 29 B 0x63 3 4 6 7 10 11 12 14 15 > embedded 0 29 C 0x62 3 4 6 7 10 11 12 14 15 > embedded 0 29 D 0x6b 3 4 5 6 7 12 14 15 > embedded 0 31 A 0x62 3 4 6 7 10 11 12 14 15 > embedded 0 31 B 0x61 3 4 6 7 10 11 12 14 15 > slot 1 2 0 A 0x60 3 4 6 7 10 11 12 14 15 > slot 1 2 0 B 0x61 3 4 6 7 10 11 12 14 15 > slot 1 2 0 C 0x62 3 4 6 7 10 11 12 14 15 > slot 1 2 0 D 0x63 3 4 6 7 10 11 12 14 15 > slot 2 2 1 A 0x61 3 4 6 7 10 11 12 14 15 > slot 2 2 1 B 0x62 3 4 6 7 10 11 12 14 15 > slot 2 2 1 C 0x63 3 4 6 7 10 11 12 14 15 > slot 2 2 1 D 0x60 3 4 6 7 10 11 12 14 15 > slot 3 2 2 A 0x62 3 4 6 7 10 11 12 14 15 > slot 3 2 2 B 0x63 3 4 6 7 10 11 12 14 15 > slot 3 2 2 C 0x60 3 4 6 7 10 11 12 14 15 > slot 3 2 2 D 0x61 3 4 6 7 10 11 12 14 15 > slot 4 2 3 A 0x63 3 4 6 7 10 11 12 14 15 > slot 4 2 3 B 0x60 3 4 6 7 10 11 12 14 15 > slot 4 2 3 C 0x61 3 4 6 7 10 11 12 14 15 > slot 4 2 3 D 0x62 3 4 6 7 10 11 12 14 15 > slot 5 2 5 A 0x61 3 4 6 7 10 11 12 14 15 > slot 5 2 5 B 0x62 3 4 6 7 10 11 12 14 15 > slot 5 2 5 C 0x63 3 4 6 7 10 11 12 14 15 > slot 5 2 5 D 0x60 3 4 6 7 10 11 12 14 15 > slot 6 2 4 A 0x60 3 4 6 7 10 11 12 14 15 > slot 6 2 4 B 0x61 3 4 6 7 10 11 12 14 15 > slot 6 2 4 C 0x62 3 4 6 7 10 11 12 14 15 > slot 6 2 4 D 0x63 3 4 6 7 10 11 12 14 15 > embedded 2 9 A 0x68 3 4 6 7 10 11 12 14 15 > embedded 2 9 B 0x69 3 4 6 7 10 11 12 14 15 > embedded 2 9 C 0x6a 3 4 6 7 10 11 12 14 15 > embedded 2 9 D 0x6b 3 4 5 6 7 12 14 15 > embedded 2 10 A 0x69 3 4 6 7 10 11 12 14 15 > embedded 2 8 A 0x68 3 4 6 7 10 11 12 14 15 > AcpiOsDerivePciId: bus 0 dev 31 func 0 > AcpiOsDerivePciId: bus 0 dev 31 func 0 > acpi0: Power Button (fixed) > AcpiOsDerivePciId: bus 0 dev 0 func 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 4, width = 1 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > ACPI timer looks GOOD min = 3, max = 3, width = 0 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > unknown: not probed (disabled) > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu1: Failed to attach throttling P_CNT > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > ACPI PCI link initial configuration: > pci0: <ACPI PCI bus> on pcib0 > pci0: physical bus=0 > map[10]: type 3, range 32, base f8000000, size 26, enabled > found-> vendor=0x8086, dev=0x2570, revid=0x02 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x2571, revid=0x02 > bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x0d (3250 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 0000e000, size 5, enabled > pcib0: matched entry for 0.29.INTA > pcib0: slot 29 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x24d2, revid=0x02 > bus=0, slot=29, func=0 > class=0c-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > map[20]: type 4, range 32, base 0000e400, size 5, enabled > pcib0: matched entry for 0.29.INTB > pcib0: slot 29 INTB hardwired to IRQ 19 > found-> vendor=0x8086, dev=0x24d4, revid=0x02 > bus=0, slot=29, func=1 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=19 > map[20]: type 4, range 32, base 0000e800, size 5, enabled > pcib0: matched entry for 0.29.INTC > pcib0: slot 29 INTC hardwired to IRQ 18 > found-> vendor=0x8086, dev=0x24d7, revid=0x02 > bus=0, slot=29, func=2 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=18 > map[20]: type 4, range 32, base 0000ec00, size 5, enabled > pcib0: matched entry for 0.29.INTA > pcib0: slot 29 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x24de, revid=0x02 > bus=0, slot=29, func=3 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > map[10]: type 1, range 32, base febffc00, size 10, enabled > pcib0: matched entry for 0.29.INTD > pcib0: slot 29 INTD hardwired to IRQ 23 > found-> vendor=0x8086, dev=0x24dd, revid=0x02 > bus=0, slot=29, func=7 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=23 > powerspec 2 supports D0 D3 current D0 > found-> vendor=0x8086, dev=0x244e, revid=0xc2 > bus=0, slot=30, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x24d0, revid=0x02 > bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 0000fc00, size 4, enabled > found-> vendor=0x8086, dev=0x24db, revid=0x02 > bus=0, slot=31, func=1 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=255 > map[20]: type 4, range 32, base 00000c00, size 5, enabled > pcib0: matched entry for 0.31.INTB > pcib0: slot 31 INTB hardwired to IRQ 17 > found-> vendor=0x8086, dev=0x24d3, revid=0x02 > bus=0, slot=31, func=3 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=17 > map[10]: type 4, range 32, base 0000dc00, size 8, enabled > map[14]: type 4, range 32, base 0000d800, size 6, enabled > map[18]: type 1, range 32, base febffa00, size 9, enabled > map[1c]: type 1, range 32, base febff900, size 8, enabled > pcib0: matched entry for 0.31.INTB > pcib0: slot 31 INTB hardwired to IRQ 17 > found-> vendor=0x8086, dev=0x24d5, revid=0x02 > bus=0, slot=31, func=5 > class=04-01-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=17 > powerspec 2 supports D0 D3 current D0 > agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 > agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 > agp0: allocating GATT for aperture of size 64M > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xf000-0xfff > pcib1: memory decode 0xfc900000-0xfe9fffff > pcib1: prefetched decode 0xf3f00000-0xf7efffff > pci1: <PCI bus> on pcib1 > pci1: physical bus=1 > map[10]: type 1, range 32, base fd000000, size 24, enabled > pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff > map[14]: type 3, range 32, base f4000000, size 25, enabled > pcib1: device (null) requested decoded memory range 0xf4000000-0xf5ffffff > pcib0: matched entry for 0.1.INTA > pcib0: slot 1 INTA hardwired to IRQ 16 > pcib1: slot 0 INTA is routed to irq 16 > found-> vendor=0x10de, dev=0x002d, revid=0x15 > bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) > intpin=a, irq=16 > powerspec 1 supports D0 D3 current D0 > pci1: <display, VGA> at device 0.0 (no driver attached) > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1 > kbd: new array size 4 > kbd1 at ukbd0 > kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0 > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ums0: IBM Corporation product 0x310b, rev 2.00/1.10, addr 3, iclass 3/1 > ums0: 3 buttons and Z dir. > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0 > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0 > uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00 > uhci3: [GIANT-LOCKED] > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0 > > [ ... freeze here sometimes ... ] > > ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00 > ehci0: [GIANT-LOCKED] > ehci_pci_attach: companion usb0 > ehci_pci_attach: companion usb1 > ehci_pci_attach: companion usb2 > ehci_pci_attach: companion usb3 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xc000-0xcfff > pcib2: memory decode 0xfea00000-0xfeafffff > pcib2: prefetched decode 0xfff00000-0xfffff > pcib2: Subtractively decoded bridge. > ACPI PCI link initial configuration: > pci2: <ACPI PCI bus> on pcib2 > pci2: physical bus=2 > map[10]: type 4, range 32, base 0000cc00, size 7, enabled > pcib2: device (null) requested decoded I/O range 0xcc00-0xcc7f > pcib2: matched entry for 2.2.INTA > pcib2: slot 2 INTA hardwired to IRQ 18 > found-> vendor=0x1022, dev=0x2020, revid=0x10 > bus=2, slot=2, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns) > intpin=a, irq=18 > map[10]: type 4, range 32, base 0000c800, size 6, enabled > pcib2: device (null) requested decoded I/O range 0xc800-0xc83f > pcib2: matched entry for 2.5.INTA > pcib2: slot 5 INTA hardwired to IRQ 17 > found-> vendor=0x1191, dev=0x8040, revid=0x01 > bus=2, slot=5, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=17 > powerspec 1 supports D0 D3 current D0 > map[10]: type 1, range 32, base feaef000, size 12, enabled > pcib2: device (null) requested decoded memory range 0xfeaef000-0xfeaeffff > map[14]: type 4, range 32, base 0000c400, size 6, enabled > pcib2: device (null) requested decoded I/O range 0xc400-0xc43f > pcib2: matched entry for 2.8.INTA > pcib2: slot 8 INTA hardwired to IRQ 20 > found-> vendor=0x8086, dev=0x1050, revid=0x02 > bus=2, slot=8, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) > intpin=a, irq=20 > powerspec 2 supports D0 D1 D2 D3 current D0 > pci2: <mass storage, SCSI> at device 2.0 (no driver attached) > pci2: <mass storage, SCSI> at device 5.0 (no driver attached) > fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xc400-0xc43f mem 0xfeaef000-0xfeaeffff irq 20 at device 8.0 on pci2 > fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaef000 > fxp0: using memory space register mapping > fxp0: PCI IDs: 8086 1050 1462 728c 0002 > fxp0: Dynamic Standby mode is enabled > miibus0: <MII bus> on fxp0 > inphy0: <i82562ET 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: bpf attached > fxp0: Ethernet address: 00:0c:76:4c:36:02 > fxp0: [MPSAFE] > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 > ata0: channel #0 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=50 > ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> > ata0: [MPSAFE] > ata1: channel #1 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=50 ostat1=00 > ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 > ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> > ata1: [MPSAFE] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xdc00-0xdcff mem 0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0 > pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xfebffa00 > pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xfebff900 > pcm0: [GIANT-LOCKED] > pcm0: <C-Media Electronics CMI9739 AC97 Codec (id = 0x434d4961)> > pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement > pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4 > pcm0: sndbuf_setmap 1f1af000, 4000; 0xd94f3000 -> 1f1af000 > pcm0: sndbuf_setmap 1f1a4000, 4000; 0xd94f7000 -> 1f1a4000 > psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0065 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0065 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3-00, 3 buttons > psm0: config:00000000, flags:00000008, packet size:4 > psm0: syncmask:08, syncbits:00 > sio0: irq maps: 0xc821 0xc831 0xc821 0xc821 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: irq maps: 0xc821 0xc831 0xc821 0xc821 > sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 4 on acpi0 > sio1: type 16550A > unknown: not probed (disabled) > unknown: not probed (disabled) > ppc0: using extended I/O port range > PC873xx probe at 0x2e got unknown ID 0x0 > ppc0: ECP SPP ECP+EPP SPP > ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > plip0: bpf attached > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > ppc: ppc0 already exists; skipping it > sio: sio0 already exists; skipping it > sio: sio1 already exists; skipping it > Trying Read_Port at 203 > Trying Read_Port at 243 > Trying Read_Port at 283 > Trying Read_Port at 2c3 > Trying Read_Port at 303 > Trying Read_Port at 343 > Trying Read_Port at 383 > Trying Read_Port at 3c3 > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > orm0: <ISA Option ROMs> at iomem 0xe0000-0xe0fff,0xc0000-0xcffff on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 > pcic1: not probed (disabled) > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > fb0: vga0, vga, type:VGA (5), flags:0x7007f > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > fb0: init mode:24, bios mode:3, current mode:24 > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > Device configuration finished. > Timecounter "TSC" frequency 2434149468 Hz quality -100 > Timecounters tick every 10.000 msec > lo0: bpf attached > cpu0: set speed to 100.0% > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin > ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin > ata0-master: setting PIO4 on Intel ICH5 chip > ata0-master: setting UDMA100 on Intel ICH5 chip > ata0-slave: setting PIO4 on Intel ICH5 chip > ata0-slave: setting UDMA100 on Intel ICH5 chip > ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master > ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B > ad0: 16 secs/int, 1 depth queue, UDMA100 > GEOM: new disk ad0 > [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/1/63 s:63 l:46492047 > [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:46492110 l:13544370 > [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > GEOM: Configure ad0s1, start 32256 length 23803928064 end 23803960319 > GEOM: Configure ad0s2, start 23803960320 length 6934717440 end 30738677759 > ad1: <HDS722516VLAT80/V34OA6EA> ATA-6 disk at ata0-slave > ad1: 157066MB (321672960 sectors), 319120 C, 16 H, 63 S, 512 B > ad1: 16 secs/int, 1 depth queue, UDMA100 > ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin > ata1-master: setting PIO4 on Intel ICH5 chip > ata1-master: setting UDMA66 on Intel ICH5 chip > acd0: <Pioneer DVD-ROM ATAPIModel DVD-106S 0122/E1.22> DVDROM drive at ata1 as master > acd0: read 6894KB/s (6894KB/s), 256KB buffer, UDMA66 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet > acd0: Writes: > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > pcm0: measured ac97 link rate at 47996 Hz, will use 48000 Hz > GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727 > GEOM: Configure ad0s2b, start 134217728 length 1073741824 end 1207959551 > GEOM: Configure ad0s2c, start 0 length 6934717440 end 6934717439 > GEOM: Configure ad0s2d, start 1207959552 length 1652555776 end 2860515327 > GEOM: Configure ad0s2e, start 2860515328 length 33554432 end 2894069759 > GEOM: Configure ad0s2f, start 2894069760 length 4040647680 end 6934717439 > GEOM: new disk ad1 > [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:220941882 > [1] f:00 typ:15 s(CHS):1023/0/1 e(CHS):1023/254/63 s:220941945 l:82654425 > [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > GEOM: Configure ad1s1, start 32256 length 113122243584 end 113122275839 > GEOM: Configure ad1s2, start 113122275840 length 42319065600 end 155441341439 > MBREXT Slice 5 on ad1s2: > [0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:82654362 > [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > GEOM: Configure ad1s5, start 32256 length 42319033344 end 42319065599 > ukbd0: at uhub0 port 1 (addr 2) disconnected > (null): at uhub1 port 1 (addr 2) disconnected > ukbd0: detached > (probe3:ata1:0:1:0): error 22 > (probe3:ata1:0:1:0): Unretryable Error > (probe3:ata1:0:1:0): error 22 > (probe3:ata1:0:1:0): Unretryable Error > (probe2:ata1:0:0:0): error 22 > (probe2:ata1:0:0:0): Unretryable Error > (probe2:ata1:0:0:0): error 6 > (probe2:ata1:0:0:0): Unretryable Error > (probe2:ata1:0:0:0): error 22 > (probe2:ata1:0:0:0): Unretryable Error > (probe0:ata0:0:0:0): error 22 > (probe0:ata0:0:0:0): Unretryable Error > (probe1:ata0:0:1:0): error 22 > (probe1:ata0:0:1:0): Unretryable Error > (probe0:ata0:0:0:0): error 22 > (probe0:ata0:0:0:0): Unretryable Error > (probe1:ata0:0:1:0): error 22 > (probe1:ata0:0:1:0): Unretryable Error > pass0 at ata1 bus 0 target 0 lun 0 > pass0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device > pass0: 66.000MB/s transfers > GEOM: new disk cd0 > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff > lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff > ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 > ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 > ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 > ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 > ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 > ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 > ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 > ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 > ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 > ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 > ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 > ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 > ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 > ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 > ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 > (cd0:ata1:0:0:0): error 6 > (cd0:ata1:0:0:0): Unretryable Error > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device > cd0: 66.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > (cd0:ata1:0:0:0): error 6 > (cd0:ata1:0:0:0): Unretryable Error > (cd0:ata1:0:0:0): error 6 > (cd0:ata1:0:0:0): Unretryable Error > (cd0:ata1:0:0:0): error 6 > (cd0:ata1:0:0:0): Unretryable Error > Mounting root from ufs:/dev/ad0s2a > start_init: trying /sbin/init > ums0: at uhub1 port 2 (addr 3) disconnected > ums0: detached > ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1 > kbd1 at ukbd0 > kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 > (null): at uhub0 port 2 (addr 3) disconnected > Linux ELF exec handler installed > procfs registered > linprocfs registered > ums0: IBM Corporation product 0x310b, rev 2.00/1.10, addr 3, iclass 3/1 > ums0: 3 buttons and Z dir. > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > Hello, I'm getting something similar with GA-7N400E, nForce2 400 chipset. In 5.3-RC1, i didn't have this problem only after updating to -current, i disabled loading the usb module and the system is booting fine, but as soon as i load usb i get this freeze. Thanks, Dan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b37cb09704110206215b0be5cc>