Date: Tue, 30 Aug 2005 21:31:26 +0100 From: Robert Slade <bsd@bathnetworks.com> To: Vizion <vizion@vizion.occoxmail.com> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Re: Proliant 5000 sever Fbsd 5.4 (re)boot problem Message-ID: <1125433886.14752.13.camel@lmail.bathnetworks.co.uk> In-Reply-To: <200508301320.44459.vizion@vizion.occoxmail.com> References: <1125428745.6664.37.camel@lmail.bathnetworks.co.uk> <200508301210.39835.vizion@vizion.occoxmail.com> <1125433344.14752.2.camel@lmail.bathnetworks.co.uk> <200508301320.44459.vizion@vizion.occoxmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 2005-08-30 at 21:20, Vizion wrote: > On Tuesday 30 August 2005 13:22, the author Robert Slade contributed to the > dialogue on- > Re: Proliant 5000 sever Fbsd 5.4 (re)boot problem: > > >On Tue, 2005-08-30 at 20:10, Vizion wrote: > >> On Tuesday 30 August 2005 12:05, the author Robert Slade contributed to > >> the dialogue on- > >> > >> Proliant 5000 sever Fbsd 5.4 (re)boot problem: > >> >Hiya, > >> > > >> >I've been working on this beasty on and off for some time. It's a Quad > >> >processor 1 Gbyte of memory and 5 scsi drives using the 2p raid > >> >controller setup as 2 raid arrays + 1 spare. > >> > > >> >The machine works fine with 5.4 release #0 with the supplied generic > >> >kernel. > >> > > >> >The problem(s) I have been having are: > >> > > >> >1. When I recompiled the Kernel with SMP support, I get random reboots. > >> >It also fails to boot sometimes failing at the point after waiting for > >> >the scsi drives to settle. I get some error codes and Fbsd fails to find > >> >the boot device. > >> > > >> >2. I CVSuped to 5.4 release #2 and recompiled the Kernel with SMP > >> >support. This does to boot at all. It gets as far as the waiting 15s for > >> >scsi devices to settle, then (appears to) reset the scsi controller and > >> >immediately tries to access the drives (does not wait). I have tried > >> >recompiling with scsi_delay set to 30000 (30s) with no change. > >> > > >> >I have checked dmesg and message logs but there is nothing related to > >> >the problem(s) there. > >> > > >> >I have gone back to the 5.4 release #0 single processor kernel for now > >> >which is a shame as the machine is slow without the multi processor > >> >support. > >> > > >> >The only thing out of the ordinary I have noted is a tx underunn -- > >> >increasing threshold to 512 bytes message which appears related to > >> >running kde remotely via vncserver and tinync. > >> > > >> >Any ideas, I can send conf files etc if needed. > >> > > >> >Thanks > >> > > >> >Rob > >> > >> What are your bios setting? > >> My guess is that you have not made the right setting using the siftware > >> and configuration utilities > >> david > > > >David, > > > >Thanks. The BIOS setting appear ok - OS type is set as UNIX (Small disk > >geometry) and the machine passes all the diagnostics. > > > >Rob > > I cannot remember - but I have sneaking notion that you need to set it as > linux Tried that too :-). I think that the problem is that with 5.4 release #2 it is trying to access that scsi drives immediately then inducing the kernel panic for 15s. Rather than inducing the panic 1st. Rob
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1125433886.14752.13.camel>