Date: Wed, 05 Jan 2005 10:52:56 +0100 From: Peter Rog <peter@soeteharing.nl> To: freebsd-net@freebsd.org Subject: Bridge and router Message-ID: <41DBB8F8.4060206@soeteharing.nl>
next in thread | raw e-mail | index | archive | help
Gents, I will first tell you my situation:(Sorry for my weak english) Internet --- Cisco 5200 VXR router(not manageble) --- Hub --- FreeBSD Bridge(IPFW firewall) --- LAN This situation works fine... In this situation i have 1 c-class subnet (255 address routed to the hub) 2 months ago the was configured a second c-class subnet on the same segment. Only different configured; one c-class subnet split in to 4 subnets with 64 addresses each. The first 2 are located on the same segment behind the FreeBSD Bridge. The 3th is routed like this: x.x.2.128 - 192 is by the router send to the x.x.1.2. This FreeBSD Router, located next to the FreeBSD Bridge, is connected to the Hub. The otherside to the intranet. Now i want to combine these two machine`s. I have a HP DL 140 (pizzabox) with 3 network interfaces. One for the hub(bge0), one for the LAN(bge1) and one for the intranet(xl0). This al works,... only nog more than a minute. It seems that the firewall hangs itself by looping packets or something. The machine has 3 interfaces, bge0 - WAN - x.x.1.2 - bridge activated bge1 - LAN - no ip - bridge activated xl0 - intranet - x.x.2.129 - no bridge The Sysctl has the bge0 and bge1 in promisc ! the rc.conf has the "Gateway_enable="YES". Can somebody tell me if there is a solution,...? Thanks. Peter Rog
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41DBB8F8.4060206>