Date: Mon, 9 Dec 2013 22:49:33 +0200 From: Aleksandr Rybalko <ray@freebsd.org> To: Marc UBM <ubm.freebsd@googlemail.com> Cc: current@freebsd.org Subject: Re: svn commit: r259016 - in head/sys: conf dev/drm2 dev/drm2/i915 dev/drm2/radeon dev/fb dev/vt kern modules/drm2/i915kms modules/drm2/radeonkms sparc64/sparc64 sys teken Message-ID: <20131209224933.99cffd23.ray@freebsd.org> In-Reply-To: <20131208163610.86e9e1ccc892aaf255d4cfb2@gmail.com> References: <201312052238.rB5McsVN020719@svn.freebsd.org> <20131208163610.86e9e1ccc892aaf255d4cfb2@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 8 Dec 2013 16:36:10 +0100 Marc UBM <ubm.freebsd@googlemail.com> wrote: > Hiho! :-) > > Thanks a lot for working on this! > > As soon as X is started, things work fine. Before that (as soon as vt > is initialized after the boot menu), output on all ttys is flickering, > resolution is at 640x480 (guessing here) and changing anything via > vidcontrol fails with "inappropriate ioctl for device". Also, screen > output starts overlapping, but a "clear" command fixes that > temporarily. The "Alt-Gr" key does nothing, manually entering ascii > keycodes via alt+number (e.g. alt-124 for |) works. > > Relevant pciconf output: > > vgapci0@pci0:0:2:0: class=0x030000 card=0x40011297 chip=0x2e328086 > rev=0x03 hdr=0x00 vendor = 'Intel Corporation' > device = '4 Series Chipset Integrated Graphics Controller' > class = display > subclass = VGA > > vgapci1@pci0:0:2:1: class=0x038000 card=0x40011297 chip=0x2e338086 > rev=0x03 hdr=0x00 vendor = 'Intel Corporation' > device = '4 Series Chipset Integrated Graphics Controller' > class = display > > Best regards, > Marc > > > > > -- > Marc "UBM" Bocklet <eternal.ubm@gmail.com> > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe@freebsd.org" Hi Marc, yeah I seen same at the test board <Intel Ironlake (D) SVGA controller> vgapci0@pci0:0:2:0: class=0x030000 card=0x00368086 chip=0x00428086 First thought was about firmware(BIOS) bug related to VGA graphic mode. Are your board made by Intel too (mine is INTEL DH55HC)? WBW -- Aleksandr Rybalko <ray@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131209224933.99cffd23.ray>