Date: Thu, 26 May 2016 16:00:41 +0200 From: Gary Jennejohn <gljennjohn@gmail.com> To: "Kenneth D. Merry" <ken@FreeBSD.ORG> Cc: current@freebsd.org Subject: Re: Recognizing SMR HDDs Message-ID: <20160526160041.6bf738b8@ernst.home> In-Reply-To: <20160526134120.GA3146@mithlond.kdm.org> References: <20160526084253.6588938f@ernst.home> <20160526123445.GA2105@mithlond.kdm.org> <20160526152921.1c91f61a@ernst.home> <20160526134120.GA3146@mithlond.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 26 May 2016 09:41:20 -0400 "Kenneth D. Merry" <ken@FreeBSD.ORG> wrote: > On Thu, May 26, 2016 at 15:29:21 +0200, Gary Jennejohn wrote: > > On Thu, 26 May 2016 08:34:45 -0400 > > "Kenneth D. Merry" <ken@FreeBSD.ORG> wrote: > > > > > On Thu, May 26, 2016 at 08:42:53 +0200, Gary Jennejohn wrote: > > > What kind of drive is it? > > > > > > > ST8000AS 0002-1NA17Z 0X03 > > Can you send the output of 'camcontrol inquiry daX -v' and > 'camcontrol identify daX -v'? > > There is a quirk for that particular drive to identify it as Drive Managed. > When attached behind a SAS controller it looks like this: > > # camcontrol inquiry da12 -v > pass12: <ATA ST8000AS0002-1NA AR17> Fixed Direct Access SPC-4 SCSI device > pass12: Serial Number Z8407Y52 > pass12: 600.000MB/s transfers, Command Queueing Enabled > Thanks for the info. Here the requested output: camcontrol inquiry da0 -v pass5: <ST8000AS 0002-1NA17Z 0X03> Fixed Direct Access SPC-4 SCSI device pass5: Serial Number 000000000000 pass5: 400.000MB/s transfers camcontrol identify da0 -v camcontrol: sending ATA ATA_IDENTIFY via pass_16 with timeout of 30000 msecs pass5: Raw identify data: 0: 0c5a 3fff c837 0010 0000 0000 003f 0000 8: 0000 0000 2020 2020 2020 2020 2020 2020 16: 5a38 3430 3339 4738 0000 8000 0000 4152 24: 3133 2020 2020 5354 3830 3030 4153 3030 32: 3032 2d31 4e41 3137 5a20 2020 2020 2020 40: 2020 2020 2020 2020 2020 2020 2020 8010 48: 4000 2f00 4000 0200 0200 0007 3fff 0010 56: 003f fc10 00fb 5c10 ffff 0fff 0000 0007 64: 0003 0078 0078 0078 0078 0000 0000 0000 72: 0000 0000 0000 001f 8d0e 0004 00cc 0040 80: 03f0 001f 346b 7d61 6163 3469 bc41 6163 88: 407f 81e7 81e7 0000 fffe 0000 fe00 0000 96: 0000 0000 0000 0000 2ab0 a381 0003 0000 104: 0000 0000 6003 0000 5000 c500 7b0e 5cbe 112: 0000 0000 0000 0000 0000 0000 0000 40dc 120: 409c 0000 0000 0000 0000 0000 0000 0000 128: 0021 2ab0 a381 2ab0 a381 2020 0002 0140 136: 0108 5000 3c06 3c0a 0000 003c 0000 0008 144: 0000 0000 bdff 0280 0000 0000 0008 0000 152: 0000 0000 0000 8000 0000 0184 8b00 8008 160: 0000 0000 0000 0000 0000 0000 0000 0000 168: 0000 0000 0000 0000 0000 0000 0000 0000 176: 0000 0000 0000 0000 0000 0000 0000 0000 184: 0000 0000 0000 0000 0000 0000 0000 0000 192: 0000 0000 0000 0000 0000 0000 0000 0000 200: 0000 0000 0000 0000 0000 0000 30a5 0000 208: 0000 4000 0000 0000 0000 0000 0000 0000 216: 0000 175c 0000 0000 0000 0000 107f 0000 224: 0000 0000 0000 0000 0000 0000 0000 0000 232: 0000 0000 0000 0000 0000 0000 0000 0000 240: 0000 0000 0000 0000 0000 0000 0000 0000 248: 0000 0000 0000 0000 0000 0000 0000 6aa5 camcontrol: sending ATA READ_NATIVE_MAX_ADDRESS48 via pass_16 with timeout of 1000 msecs pass5: Raw native max data: 0: 0000 0000 0000 0000 0000 0000 error = 0x00, sector_count = 0x0000, device = 0x00, status = 0x00 pass5: <ST8000AS0002-1NA17Z AR13> ACS-2 ATA SATA 3.x device pass5: 400.000MB/s transfers protocol ATA/ATAPI-9 SATA 3.x device model ST8000AS0002-1NA17Z firmware revision AR13 serial number Z84039G8 WWN 5000c5007b0e5cbe cylinders 16383 heads 16 sectors/track 63 sector size logical 512, physical 4096, offset 0 LBA supported 268435455 sectors LBA48 supported 15628053168 sectors PIO supported PIO4 DMA supported WDMA2 UDMA6 media RPM 5980 Feature Support Enabled Value Vendor read ahead yes yes write cache yes yes flush cache yes yes overlap no Tagged Command Queuing (TCQ) no no Native Command Queuing (NCQ) yes 32 tags NCQ Queue Management no NCQ Streaming no Receive & Send FPDMA Queued no SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no automatic acoustic management no no media status notification no no power-up in Standby yes no write-read-verify no no unload yes yes general purpose logging yes yes free-fall no no Data Set Management (DSM/TRIM) no Host Protected Area (HPA) yes no 15628053168/1 HPA - Security no -- Gary Jennejohn
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160526160041.6bf738b8>