Date: Thu, 06 Apr 2006 15:44:38 +0930 From: Adrian Murphy <amurphy@gsoft.com.au> To: freebsd-current@freebsd.org Subject: Re: Interrupt storm on IRQ11 Message-ID: <4434B1CE.9050102@gsoft.com.au> In-Reply-To: <4433E08A.3010802@fastmail.fm> References: <4433E08A.3010802@fastmail.fm>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------040500040801020903020504 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, I too have a similar problem. I have a Dell Inspiron 8000 and the wireless card (Alloy WLT245401) which has a TI chipset. I have used the ndis scheme successfully for the last few months with current dated November 3 2005. I updated current on March 30th. Now I get the interrupt storm on irq 10. Unlike Patrick, I always get an interrupt storm, whether the card is inserted at boot time or if it is inserted later. See my dmesg below. The devices Patrick has on irq 11 (vgapci0, uhci0, xl0) are attached to irq 10 in this laptop. cardbus is also on irq10. I note the commit messages for the file src/sys/dev/cardbus/cardbus.c indicate there may be issues in the current version. But that is dated March 1st. I have tried increasing sysctl hw.intr_storm_threshold up to 200000 from 500 but it doesn't seem to help, so far. Thanks, Adrian Patrick Bowen wrote: > List; > > I get the following on boot in -current; > > Interrupt storm detected on "irq11:"; throttling interrupt source > > If I have my atheros card in the laptop (Dell C600) during boot I can > then do "kldload if_ath" and I'm good to go. If I plug the card in > anytime *after* I get to the login prompt it's non-functional. > > When the card is in the slot at boot, and after I "kldload if_ath" I see; > > ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, > RF2413, RF5413) > ath0: <Atheros 5212> mem 0x88000000-0x8800ffff at device 0.0 on > cardbus1 > ath0: Ethernet address: 00:13:46:b6:19:ea > ath0: mac 7.8 phy 4.5 radio 5.6 > > If I plug the card in later all I see is; > > ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, > RF2413, RF5413) > > I'm wondering if this is related to RM's recent commits. > > (full dmesg attached). > > Thanks, > Patrick > > > ------------------------------------------------------------------------ > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 7.0-CURRENT #1: Sat Apr 1 21:34:55 CST 2006 > pbowen@sg1.sgc.org:/usr/obj/usr/src/sys/GENERIC > WARNING: WITNESS option enabled, expect reduced performance. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Pentium III (601.37-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 536719360 (511 MB) > avail memory = 515604480 (491 MB) > kbd1 at kbdmux0 > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL CPi R > on motherboard > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > battery1: <ACPI Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xf8000000-0xfbffffff,0xfdffc000-0xfdffffff irq 11 at device 0.0 on pci1 > cbb0: <TI1420 PCI-CardBus Bridge> at device 3.0 on pci0 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb1: <TI1420 PCI-CardBus Bridge> at device 3.1 on pci0 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x860-0x86f at device 7.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > pci0: <bridge> at device 7.3 (no driver attached) > pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0 > pcm0: <SigmaTel STAC9721/23 AC97 Codec> > xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xf3ffdc00-0xf3ffdc7f,0xf3ffd800-0xf3ffd87f irq 11 at device 16.0 on pci0 > miibus0: <MII bus> on xl0 > tdkphy0: <TDK 78Q2120 media interface> on miibus0 > tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:04:76:48:c7:b2 > pci0: <simple comms> at device 16.1 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio0: [FAST] > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ppc0: [GIANT-LOCKED] > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 601367225 Hz quality 800 > Timecounters tick every 1.000 msec > Interrupt storm detected on "irq11:"; throttling interrupt source > cardbus1: <network, ethernet> at device 0.0 (no driver attached) > ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master UDMA33 > acd0: CDRW <HL-DT-ST CD-RW GCE-8080N/2.06> at ata1-master PIO4 > Trying to mount root from ufs:/dev/ad0s1a > cpu0: too many short sleeps, backing off to C1 > ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > ath0: <Atheros 5212> mem 0x88000000-0x8800ffff at device 0.0 on cardbus1 > ath0: Ethernet address: 00:13:46:b6:19:ea > ath0: mac 7.8 phy 4.5 radio 5.6 > ath0: link state changed to UP > > > ------------------------------------------------------------------------ > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" --------------040500040801020903020504 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #4: Fri Mar 31 15:08:44 CST 2006 root@priscilla.gsoft.com.au:/usr/obj/usr/src/sys/PRISCILLA Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (698.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536780800 (511 MB) avail memory = 515854336 (491 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem 0xe8000000-0xebffffff,0xfcffc000-0xfcffffff irq 11 at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcm0: <ESS Technology Maestro3> port 0xdc00-0xdcff mem 0xf6ffe000-0xf6ffffff irq 5 at device 3.0 on pci2 pcm0: <SigmaTel STAC9721/23 AC97 Codec> pcib3: <PCI-PCI bridge> at device 6.0 on pci2 pci8: <PCI bus> on pcib3 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xf8fff000-0xf8ffffff,0xf8e00000-0xf8efffff irq 10 at device 4.0 on pci8 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:20:e0:65:13:1d pci8: <simple comms> at device 8.0 (no driver attached) cbb0: <TI4451 PCI-CardBus Bridge> at device 15.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI4451 PCI-CardBus Bridge> at device 15.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Texas Instruments PCI4451> mem 0xf6ffd800-0xf6ffdfff,0xf6ff8000-0xf6ffbfff irq 10 at device 15.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 5b:4f:c0:00:3f:ff:ff:ff fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xbce0-0xbcff irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FAST] sio1 port 0x2f8-0x2ff,0x280-0x287 irq 3 drq 3 on acpi0 sio1: type 16550A sio1: [FAST] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 698472961 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB <FUJITSU MHT2060AT 0022> at ata0-master UDMA100 acd0: CDROM <TEAC CD-ROM CD-224E/3.7C> at ata0-slave UDMA33 cd0 at ata0 bus 0 target 1 lun 0 cd0: <TEAC CD-224E 3.7C> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s2a ums0: <vendor 0x1241 product 0x1122, class 0/0, rev 1.00/1.00, addr 2> on uhub0 ums0: 5 buttons and Z dir. Interrupt storm detected on "irq10:"; throttling interrupt source --------------040500040801020903020504--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4434B1CE.9050102>