Date: Sat, 5 Apr 2014 17:54:00 +0000 (UTC) From: Luiz Otavio O Souza <loos@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r264153 - head/sys/arm/ti Message-ID: <201404051754.s35Hs0fQ007379@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: loos Date: Sat Apr 5 17:53:59 2014 New Revision: 264153 URL: http://svnweb.freebsd.org/changeset/base/264153 Log: - Fix the setup of interrupts for banks 2 and 3 on AM335x. On AM335x each one of the four GPIO banks has two physical interrupt lines, so we now allocate resources and setup our interrupt handler for all the (8) available interrupts. On OMAP3 and OMAP4 there is only one interrupt for each GPIO bank (6 banks, 6 interrupts), but there are two set of registers where the first one is used to setup the delivery of interrupts to the MPU and the second set, setup the delivery of interrupts to the DSP. On AM335x, each set of registers controls each one of the interrupt lines. - Remove nonexistent registers for OMAP4 and AM335x, replace their use with the correct ones for these SoCs. - Remove stray whitespace. Based on OMAP3, OMAP4 and AM335x TRMs. Tested on Beaglebone-black. Modified: head/sys/arm/ti/ti_gpio.c Modified: head/sys/arm/ti/ti_gpio.c ============================================================================== --- head/sys/arm/ti/ti_gpio.c Sat Apr 5 17:29:40 2014 (r264152) +++ head/sys/arm/ti/ti_gpio.c Sat Apr 5 17:53:59 2014 (r264153) @@ -124,10 +124,6 @@ __FBSDID("$FreeBSD$"); #define TI_GPIO_FALLINGDETECT 0x014C #define TI_GPIO_DEBOUNCENABLE 0x0150 #define TI_GPIO_DEBOUNCINGTIME 0x0154 -#define TI_GPIO_CLEARIRQENABLE1 0x0160 -#define TI_GPIO_SETIRQENABLE1 0x0164 -#define TI_GPIO_CLEARIRQENABLE2 0x0170 -#define TI_GPIO_SETIRQENABLE2 0x0174 #define TI_GPIO_CLEARWKUPENA 0x0180 #define TI_GPIO_SETWKUENA 0x0184 #define TI_GPIO_CLEARDATAOUT 0x0190 @@ -140,17 +136,21 @@ __FBSDID("$FreeBSD$"); #if defined(SOC_OMAP3) #define MAX_GPIO_BANKS 6 #define FIRST_GPIO_BANK 1 +#define INTR_PER_BANK 1 #define TI_GPIO_REV 0x00000025 #elif defined(SOC_OMAP4) #define MAX_GPIO_BANKS 6 #define FIRST_GPIO_BANK 1 +#define INTR_PER_BANK 1 #define TI_GPIO_REV 0x50600801 #elif defined(SOC_TI_AM335X) #define MAX_GPIO_BANKS 4 #define FIRST_GPIO_BANK 0 +#define INTR_PER_BANK 2 #define TI_GPIO_REV 0x50600801 #endif #define PINS_PER_BANK 32 +#define MAX_GPIO_INTRS MAX_GPIO_BANKS * INTR_PER_BANK /** * ti_gpio_mem_spec - Resource specification used when allocating resources @@ -158,6 +158,15 @@ __FBSDID("$FreeBSD$"); * * This driver module can have up to six independent memory regions, each * region typically controls 32 GPIO pins. + * + * On OMAP3 and OMAP4 there is only one physical interrupt line per bank, + * but there are two set of registers which control the interrupt delivery + * to internal subsystems. The first set of registers control the + * interrupts delivery to the MPU and the second set control the + * interrupts delivery to the DSP. + * + * On AM335x there are two physical interrupt lines for each GPIO module. + * Each interrupt line is controlled by a set of registers. */ static struct resource_spec ti_gpio_mem_spec[] = { { SYS_RES_MEMORY, 0, RF_ACTIVE }, @@ -175,9 +184,11 @@ static struct resource_spec ti_gpio_irq_ { SYS_RES_IRQ, 1, RF_ACTIVE | RF_OPTIONAL }, { SYS_RES_IRQ, 2, RF_ACTIVE | RF_OPTIONAL }, { SYS_RES_IRQ, 3, RF_ACTIVE | RF_OPTIONAL }, -#if !defined(SOC_TI_AM335X) { SYS_RES_IRQ, 4, RF_ACTIVE | RF_OPTIONAL }, { SYS_RES_IRQ, 5, RF_ACTIVE | RF_OPTIONAL }, +#if defined(SOC_TI_AM335X) + { SYS_RES_IRQ, 6, RF_ACTIVE | RF_OPTIONAL }, + { SYS_RES_IRQ, 7, RF_ACTIVE | RF_OPTIONAL }, #endif { -1, 0, 0 } }; @@ -196,10 +207,10 @@ struct ti_gpio_softc { * the SoC type. */ struct resource *sc_mem_res[MAX_GPIO_BANKS]; - struct resource *sc_irq_res[MAX_GPIO_BANKS]; + struct resource *sc_irq_res[MAX_GPIO_INTRS]; /* The handle for the register IRQ handlers. */ - void *sc_irq_hdl[MAX_GPIO_BANKS]; + void *sc_irq_hdl[MAX_GPIO_INTRS]; /* * The following describes the H/W revision of each of the GPIO banks. @@ -254,6 +265,20 @@ ti_gpio_write_4(struct ti_gpio_softc *sc bus_write_4(sc->sc_mem_res[bank], off, val); } +static inline void +ti_gpio_intr_clr(struct ti_gpio_softc *sc, unsigned int bank, uint32_t mask) +{ + + /* We clear both set of registers. */ +#if defined(SOC_OMAP4) || defined(SOC_TI_AM335X) + ti_gpio_write_4(sc, bank, TI_GPIO_IRQSTATUS_CLR_0, mask); + ti_gpio_write_4(sc, bank, TI_GPIO_IRQSTATUS_CLR_1, mask); +#else + ti_gpio_write_4(sc, bank, TI_GPIO_CLEARIRQENABLE1, mask); + ti_gpio_write_4(sc, bank, TI_GPIO_CLEARIRQENABLE2, mask); +#endif +} + /** * ti_gpio_pin_max - Returns the maximum number of GPIO pins * @dev: gpio device handle @@ -647,7 +672,7 @@ ti_gpio_attach_intr(device_t dev) struct ti_gpio_softc *sc; sc = device_get_softc(dev); - for (i = 0; i < MAX_GPIO_BANKS; i++) { + for (i = 0; i < MAX_GPIO_INTRS; i++) { if (sc->sc_irq_res[i] == NULL) break; @@ -674,7 +699,7 @@ ti_gpio_detach_intr(device_t dev) /* Teardown our interrupt handlers. */ sc = device_get_softc(dev); - for (i = 0; i < MAX_GPIO_BANKS; i++) { + for (i = 0; i < MAX_GPIO_INTRS; i++) { if (sc->sc_irq_res[i] == NULL) break; @@ -725,8 +750,7 @@ ti_gpio_bank_init(device_t dev, int bank } /* Disable interrupts for all pins. */ - ti_gpio_write_4(sc, bank, TI_GPIO_CLEARIRQENABLE1, 0xffffffff); - ti_gpio_write_4(sc, bank, TI_GPIO_CLEARIRQENABLE2, 0xffffffff); + ti_gpio_intr_clr(sc, bank, 0xffffffff); /* Init OE register based on pads configuration. */ reg_oe = 0xffffffff; @@ -737,7 +761,7 @@ ti_gpio_bank_init(device_t dev, int bank reg_oe &= ~(1UL << pin); } ti_gpio_write_4(sc, bank, TI_GPIO_OE, reg_oe); - + return (0); } @@ -840,10 +864,8 @@ ti_gpio_detach(device_t dev) /* Disable all interrupts */ for (i = 0; i < MAX_GPIO_BANKS; i++) { - if (sc->sc_mem_res[i] != NULL) { - ti_gpio_write_4(sc, i, TI_GPIO_CLEARIRQENABLE1, 0xffffffff); - ti_gpio_write_4(sc, i, TI_GPIO_CLEARIRQENABLE2, 0xffffffff); - } + if (sc->sc_mem_res[i] != NULL) + ti_gpio_intr_clr(sc, i, 0xffffffff); } bus_generic_detach(dev);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201404051754.s35Hs0fQ007379>