Date: Thu, 13 Oct 2016 16:57:19 +0000 (UTC) From: Ed Maste <emaste@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r307223 - head/sys/contrib/octeon-sdk Message-ID: <201610131657.u9DGvJFA032663@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: emaste Date: Thu Oct 13 16:57:19 2016 New Revision: 307223 URL: https://svnweb.freebsd.org/changeset/base/307223 Log: Convert  U+00AD soft hyphen to - in Cavium Octeon SDK Linux's copy of the Cavium SDK does not have these non-ASCII characters and this reduces noise in diffs when comparing the two. Sponsored by: The FreeBSD Foundation Modified: head/sys/contrib/octeon-sdk/cvmx-dma-engine.h head/sys/contrib/octeon-sdk/cvmx-higig.h head/sys/contrib/octeon-sdk/cvmx-pcie.c head/sys/contrib/octeon-sdk/cvmx-raid.h Modified: head/sys/contrib/octeon-sdk/cvmx-dma-engine.h ============================================================================== --- head/sys/contrib/octeon-sdk/cvmx-dma-engine.h Thu Oct 13 16:45:01 2016 (r307222) +++ head/sys/contrib/octeon-sdk/cvmx-dma-engine.h Thu Oct 13 16:57:19 2016 (r307223) @@ -87,7 +87,7 @@ typedef union PCIe memory space pointers in the LAST POINTERS block in the OUTBOUND, INBOUND, and EXTERNAL-ONLY cases. Must be zero in the INTERNAL-ONLY case. Must be zero on chips with PCI */ - cvmx_dma_engine_transfer_t type : 2; /**< Type A given PCI DMA transfer is either OUTBOUND (read from L2/DRAM, + cvmx_dma_engine_transfer_t type : 2; /**< Type - A given PCI DMA transfer is either OUTBOUND (read from L2/DRAM, write into PCI / PCIe memory space), INBOUND (read from PCI / PCIe memory space, write into L2/DRAM), INTERNAL-ONLY (read from L2/DRAM, write into L2/DRAM), or EXTERNAL-ONLY (read from PCIe memory space, write into PCIe memory space). */ @@ -95,14 +95,14 @@ typedef union work-queue entry that is submitted by the hardware after completing the DMA; when WQP = 0, PTR (if non-zero) is a pointer to a byte in local memory that is written to 0 by the hardware after completing the DMA. */ - uint64_t c : 1; /**< C Counter. 1 = use counter 1, 0 = use counter 0. + uint64_t c : 1; /**< C - Counter. 1 = use counter 1, 0 = use counter 0. The C bit selects between the two counters (NPEI_DMA_CNTS[DMA0,DMA1]) that can optionally be updated after an OUTBOUND or EXTERNAL-ONLY transfer, and also selects between the two forced-interrupt bits (NPEI_INT_SUMn[DMA0_FI, DMA1_FI]) that can optionally be set after an OUTBOUND or EXTERNAL-ONLY transfer. C must be zero for INBOUND or INTERNAL-ONLY transfers. */ - uint64_t ca : 1; /**< CA Counter add. + uint64_t ca : 1; /**< CA - Counter add. When CA = 1, the hardware updates the selected counter after it completes the PCI DMA OUTBOUND or EXTERNAL-ONLY Instruction. - If C = 0, PCIE_DMA_CNT0 is updated @@ -117,13 +117,13 @@ typedef union When CA = 0, the hardware does not update any counters. For an INBOUND or INTERNAL-ONLY PCI DMA transfer, CA must never be set, and the hardware never adds to the counters. */ - uint64_t fi : 1; /**< FI Force interrupt. + uint64_t fi : 1; /**< FI - Force interrupt. When FI is set for an OUTBOUND or EXTERNAL-ONLY transfer, the hardware sets a forced interrupt bit after it completes the PCI DMA Instruction. If C = 0, NPEI_INT_SUMn[DMA0_FI] is set, else NPEI_INT_SUMn[DMA1_FI] is set. For an INBOUND or INTERNAL-ONLY PCI DMA operation, FI must never be set, and the hardware never generates interrupts. */ - uint64_t ii : 1; /**< II Ignore the I bit (i.e. the I bit of the PCI DMA instruction local pointer). + uint64_t ii : 1; /**< II- Ignore the I bit (i.e. the I bit of the PCI DMA instruction local pointer). For OUTBOUND transfers when II = 1, ignore the I bit and the FL bit in the DMA HDR alone determines whether the hardware frees any/all of the local buffers in the FIRST POINTERS area: @@ -134,7 +134,7 @@ typedef union - when (FL I) is true, the hardware frees the local buffer when II=0. For INBOUND, INTERNAL-ONLY, and EXTERNAL-ONLY PCI DMA transfers, II must never be set, and local buffers are never freed. */ - uint64_t fl : 1; /**< FL Free local buffer. + uint64_t fl : 1; /**< FL - Free local buffer. When FL = 1, for an OUTBOUND operation, it indicates that the local buffers in the FIRST BUFFERS area should be freed. If II = 1, the FL bit alone indicates whether the local buffer should be freed: @@ -145,7 +145,7 @@ typedef union - when (FL I) is true, the hardware frees the local buffer when II=0. For an INBOUND, INTERNAL-ONLY, or EXTERNAL-ONLY PCI DMA transfer, FL must never be set, and local buffers are never freed. */ - uint64_t nlst : 4; /**< NLST Number Last pointers. + uint64_t nlst : 4; /**< NLST - Number Last pointers. The number of pointers in the LAST POINTERS area. In the INBOUND, OUTBOUND, and EXTERNAL-ONLY cases, the LAST POINTERS area contains PCI components, and the number of 64-bit words @@ -156,7 +156,7 @@ typedef union - HDR.NLST Note that the sum of the number of 64-bit words in the LAST POINTERS and FIRST POINTERS area must never exceed 31. */ - uint64_t nfst : 4; /**< NFST Number First pointers. + uint64_t nfst : 4; /**< NFST - Number First pointers. The number of pointers in the FIRST POINTERS area. In the INBOUND, OUTBOUND, and INTERNAL-ONLY cases, the FIRST POINTERS area contains local pointers, and the number of 64-bit words required @@ -166,7 +166,7 @@ typedef union components, and the number of 64-bit words required in the FIRST POINTERS area is: - HDR.NFST + ((HDR.NFST + 3)/4) where the division removes the fraction. */ - uint64_t addr : 40; /**< PTR Pointer, either a work-queue-entry pointer (when WQP = 1) or a local + uint64_t addr : 40; /**< PTR - Pointer, either a work-queue-entry pointer (when WQP = 1) or a local memory pointer (WQP = 0). When WQP = 1 and PTR 0x0, the hardware inserts the work-queue entry indicated by PTR into a POW input queue after the PCI DMA operation is @@ -186,12 +186,12 @@ typedef union uint64_t u64; struct { - uint64_t i : 1; /**< I Invert free. + uint64_t i : 1; /**< I - Invert free. This bit gives the software the ability to free buffers independently for an OUTBOUND PCI DMA transfer. I is not used by the hardware when II is set. I must not be set, and buffers are never freed, for INBOUND, INTERNAL-ONLY, and EXTERNAL-ONLY PCI DMA transfers. */ - uint64_t back : 4; /**< Back Backup amount. + uint64_t back : 4; /**< Back - Backup amount. Allows the start of a buffer that is to be freed during an OUTBOUND transfer to be different from the ptr value. Back specifies the amount to subtract from the pointer to reach the start when freeing a buffer. @@ -200,13 +200,13 @@ typedef union Back is only used by the hardware when the buffer corresponding to ptr is freed. Back must be 0x0, and buffers are never freed, for INBOUND, INTERNAL-ONLY, and EXTERNAL-ONLY PCI DMA transfers. */ - uint64_t pool : 3; /**< Pool Free pool. + uint64_t pool : 3; /**< Pool - Free pool. Specifies which pool (of the eight hardware-managed FPA free pools) receives the buffer associated with ptr when freed during an OUTBOUND transfer. Pool is only used when the buffer corresponding to ptr is freed. Pool must be 0x0, and buffers are never freed, for INBOUND, INTERNAL-ONLY, and EXTERNAL-ONLY PCI DMA transfers. */ - uint64_t f : 1; /**< F Full-block writes are allowed. + uint64_t f : 1; /**< F - Full-block writes are allowed. When set, the hardware is permitted to write all the bytes in the cache blocks covered by ptr, ptr + Size - 1. This can improve memory system performance when the write misses in the L2 cache. @@ -218,12 +218,12 @@ typedef union F must not be set for local pointers that are not written to: - The local pointers in the FIRST POINTERS area for OUTBOUND and INTERNAL-ONLY transfers. */ - uint64_t a : 1; /**< A Allocate L2. + uint64_t a : 1; /**< A - Allocate L2. This is a hint to the hardware that the cache blocks should be allocated in the L2 cache (if they were not already). */ - uint64_t l : 1; /**< L Little-endian. + uint64_t l : 1; /**< L - Little-endian. When L is set, the data at ptr is in little-endian format rather than big-endian. */ - uint64_t size : 13; /**< Size Size in bytes of the contiguous space specified by ptr. A Size value of 0 is + uint64_t size : 13; /**< Size - Size in bytes of the contiguous space specified by ptr. A Size value of 0 is illegal. Note that the sum of the sizes in the FIRST POINTERS area must always exactly equal the sum of the sizes/lengths in the LAST POINTERS area: - In the OUTBOUND and INBOUND cases, the HDR.NFST size fields in the Modified: head/sys/contrib/octeon-sdk/cvmx-higig.h ============================================================================== --- head/sys/contrib/octeon-sdk/cvmx-higig.h Thu Oct 13 16:45:01 2016 (r307222) +++ head/sys/contrib/octeon-sdk/cvmx-higig.h Thu Oct 13 16:57:19 2016 (r307223) @@ -120,11 +120,11 @@ typedef struct multicast (unknown L2 multicast and IPMC) packets. This field is used when OPCODE is 011 or 100 Semantics of PFM bits are as follows; For registered L2 multicast packets: - PFM= 0 Flood to VLAN - PFM= 1 or 2 Send to group members in the L2MC table + PFM= 0 - Flood to VLAN + PFM= 1 or 2 - Send to group members in the L2MC table For unregistered L2 multicast packets: - PFM= 0 or 1 Flood to VLAN - PFM= 2 Drop the packet */ + PFM= 0 or 1 - Flood to VLAN + PFM= 2 - Drop the packet */ uint32_t src_port_tgid : 6; /**< If the MSB of this field is set, then it indicates the LAG the packet ingressed on, else it represents the physical port the packet ingressed on. */ uint32_t dst_port : 5; /**< Port number of destination port on which the packet needs to egress. */ @@ -138,10 +138,10 @@ typedef struct uint32_t cng_low : 1; /**< Semantics of CNG_HIGH and CNG_LOW are as follows: The following encodings are to make it backward compatible: [CNG_HIGH, CNG_LOW] - COLOR - [0, 0] Packet is green - [0, 1] Packet is red - [1, 1] Packet is yellow - [1, 0] Undefined */ + [0, 0] - Packet is green + [0, 1] - Packet is red + [1, 1] - Packet is yellow + [1, 0] - Undefined */ uint32_t dst_modid_low : 5; /**< Bits [4-: 0] of Module ID of the destination port on which the packet needs to egress. */ } s; } dw1; @@ -273,11 +273,11 @@ typedef struct multicast (unknown L2 multicast and IPMC) packets. This field is used when OPCODE is 011 or 100 Semantics of PFM bits are as follows; For registered L2 multicast packets: - PFM= 0 Flood to VLAN - PFM= 1 or 2 Send to group members in the L2MC table + PFM= 0 - Flood to VLAN + PFM= 1 or 2 - Send to group members in the L2MC table For unregistered L2 multicast packets: - PFM= 0 or 1 Flood to VLAN - PFM= 2 Drop the packet */ + PFM= 0 or 1 - Flood to VLAN + PFM= 2 - Drop the packet */ uint32_t src_t : 1; /**< If the MSB of this field is set, then it indicates the LAG the packet ingressed on, else it represents the physical port the packet ingressed on. */ uint32_t reserved_11_12 : 2; Modified: head/sys/contrib/octeon-sdk/cvmx-pcie.c ============================================================================== --- head/sys/contrib/octeon-sdk/cvmx-pcie.c Thu Oct 13 16:45:01 2016 (r307222) +++ head/sys/contrib/octeon-sdk/cvmx-pcie.c Thu Oct 13 16:57:19 2016 (r307223) @@ -722,8 +722,8 @@ retry: /* Setup BAR2 attributes */ /* Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) */ - /* PTLP_RO,CTLP_RO should normally be set (except for debug). */ - /* WAIT_COM=0 will likely work for all applications. */ + /* - PTLP_RO,CTLP_RO should normally be set (except for debug). */ + /* - WAIT_COM=0 will likely work for all applications. */ /* Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]) */ if (pcie_port) { @@ -1139,8 +1139,8 @@ static int __cvmx_pcie_rc_initialize_gen /* Setup BAR2 attributes */ /* Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) */ - /* PTLP_RO,CTLP_RO should normally be set (except for debug). */ - /* WAIT_COM=0 will likely work for all applications. */ + /* - PTLP_RO,CTLP_RO should normally be set (except for debug). */ + /* - WAIT_COM=0 will likely work for all applications. */ /* Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]) */ pemx_bar_ctl.u64 = cvmx_read_csr(CVMX_PEMX_BAR_CTL(pcie_port)); pemx_bar_ctl.s.bar1_siz = 3; /* 256MB BAR1*/ Modified: head/sys/contrib/octeon-sdk/cvmx-raid.h ============================================================================== --- head/sys/contrib/octeon-sdk/cvmx-raid.h Thu Oct 13 16:45:01 2016 (r307222) +++ head/sys/contrib/octeon-sdk/cvmx-raid.h Thu Oct 13 16:57:19 2016 (r307223) @@ -125,7 +125,7 @@ typedef union { uint64_t reserved_58_63 : 6; /**< Must be zero */ uint64_t fw : 1; /**< When set, indicates that RAD can modify any byte in any (128B) cache line touched - by L2/DRAM addresses OWORD[PTR] through OWORD[PTR]+CWORD[SIZE]1. + by L2/DRAM addresses OWORD[PTR] through OWORD[PTR]+CWORD[SIZE]-1. Setting OWORD[FW] can improve hardware performance, as some DRAM loads can be avoided on L2 cache misses. The Q OWORD[FW] must not be set when CWORD[Q_CMP] is set, and the P OWORD[FW] must not be set when
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201610131657.u9DGvJFA032663>