Date: Mon, 20 Oct 2008 01:25:04 +0900 From: Norikatsu Shigemura <nork@FreeBSD.org> To: pyunyh@gmail.com Cc: Daniel Gerzo <danger@FreeBSD.org>, Norikatsu Shigemura <nork@FreeBSD.org>, stable@FreeBSD.org, yongari@FreeBSD.org Subject: Re: re0 problem Message-ID: <20081020012504.95adc0ca.nork@FreeBSD.org> In-Reply-To: <20081018020248.GB31303@cdnetworks.co.kr> References: <755632516.20081018001504@rulez.sk> <20081018020248.GB31303@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Pyun! On Sat, 18 Oct 2008 11:02:48 +0900 Pyun YongHyeon <pyunyh@gmail.com> wrote: > re(4) didn't require special PHY handling for 8169/8110 > controllers. Did it ever work on older FreeBSD releases? I vaguely > remember nork@ (Norikatsu Shigemura) also said Carbus GbE > (RTL8169SBL) is not working but he could see successful attachment > of rgephy(4). > How about plugging UTP cable to controller before loading driver? On the latest 8-current, I got a probe failed: FreeBSD pelsia.ninth-nine.com 8.0-CURRENT FreeBSD 8.0-CURRENT #28: Sun Oct 12 21:55:35 JST 2008 nork@pelsia.ninth-nine.com:/usr/obj/usr/src/sys/PELSIA amd64 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xa000-0xa0ff mem 0xf0300000-0xf03001ff irq 16 at device 0.0 on pci3 re0: Chip rev. 0x10000000 re0: MAC rev. 0x00000000 re0: PHY write failed re0: PHY write failed re0: PHY read failed re0: MII without any phy! device_attach: re0 attach returned 6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - But, old current is ok. FreeBSD melfina.ninth-nine.com 8.0-CURRENT FreeBSD 8.0-CURRENT #74: Thu Aug 28 05:24:38 JST 2008 nork@melfina.ninth-nine.com:/usr/obj/usr/src/sys/MELFINA i386 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0x3100-0x31ff mem 0xb0103000-0xb01031ff irq 22 at device 0.0 on cardbus0 re0: Reserved 0x200 bytes for rid 0x14 type 3 at 0xb0103000 cbb0: Opening memory: cbb0: Normal: 0xb0103000-0xb0103fff re0: Chip rev. 0x10000000 re0: MAC rev. 0x00000000 miibus1: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:e0:4c:77:ab:e8 re0: [MPSAFE] re0: [FILTER] rgephy0: detached miibus1: detached cbb0: Opening memory: re0: detached - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081020012504.95adc0ca.nork>