Date: Thu, 19 Jan 2017 11:13:42 +0100 From: =?iso-8859-1?Q?M=26S_-_Krasznai_Andr=E1s?= <Krasznai.Andras@mands.hu> To: "freebsd-current@freebsd.org" <freebsd-current@freebsd.org> Subject: USB_ERR_TIMEOUT, USB_ERR_IOERROR in Freebsd-current Message-ID: <3B0F582294DE3E448963BA62DC306AEE4708990A0B@exchange.mands.hu>
index | next in thread | raw e-mail
[-- Attachment #1 --] Hi I have FreeBSD-current on a Lenovo T510 laptop. Since a few weeks I observe the following error messages during boot: usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) uhub2: 8 ports with 8 removable, self powered usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT sdhci_pci0-slot0: Controller timeout sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x00000400 sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00004007 sdhci_pci0-slot0: Timeout: 0x0000000e | Int stat: 0x00000001 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000001 sdhci_pci0-slot0: Caps: 0x01e032b2 | Max curr: 0x00000040 sdhci_pci0-slot0: =========================================== usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR The error slows down the boot process, otherwise I did not observe other problems. The same laptop did not show similar error messages with FreeBSD-11, nor with any earlier version. I attached the dmesg output, kernel configuration and pciconf -lv output. Did anybody experience similar things? best regards Üdvözlettel: Krasznai András rendszermérnök M&S Informatikai Zrt. 1136 Budapest, Pannónia u. 11. Tel: +36 (1) 703-2923 Fax: +36 (1) 703-2949 Mobil: +36 (30) 703-2923 E-mail: krasznai.andras@mands.hu<mailto:krasznai.andras@mands.hu> [-- Attachment #2 --] # # GENERIC-NODEBUG -- WITNESS and INVARIANTS free kernel configuration file # for FreeBSD/amd64 # modified # This configuration file removes several debugging options, including # WITNESS and INVARIANTS checking, which are known to have significant # performance impact on running systems. When benchmarking new features # this kernel should be used instead of the standard GENERIC. # This kernel configuration should never appear outside of the HEAD # of the FreeBSD tree. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # include GENERIC ident GEN12 nooptions BUF_TRACKING nooptions FULL_BUF_TRACKING nooptions DEADLKRES nooptions INVARIANTS nooptions INVARIANT_SUPPORT nooptions WITNESS nooptions WITNESS_SKIPSPIN nooptions MALLOC_DEBUG_MAXZONES nooptions VESA nodevice xhci # USB 3.0 support not in kernel options LINPROCFS # Linux ABI/API compatibility options LINSYSFS # Linux SYS filesystem, extra re. GENERI options TMPFS # Efficient memory filesystem, extra re. options COMPAT_LINUX32 # linuxulator support 32-bit options COMPAT_43 options CD9660_ICONV options MSDOSFS_ICONV options LIBICONV [-- Attachment #3 --] hostb0@pci0:255:0:0: class=0x060000 card=0x219617aa chip=0x2c628086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QuickPath Architecture Generic Non-core Registers' class = bridge subclass = HOST-PCI hostb1@pci0:255:0:1: class=0x060000 card=0x219617aa chip=0x2d018086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QuickPath Architecture System Address Decoder' class = bridge subclass = HOST-PCI hostb2@pci0:255:2:0: class=0x060000 card=0x219617aa chip=0x2d108086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QPI Link 0' class = bridge subclass = HOST-PCI hostb3@pci0:255:2:1: class=0x060000 card=0x219617aa chip=0x2d118086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '1st Generation Core i3/5/7 Processor QPI Physical 0' class = bridge subclass = HOST-PCI hostb4@pci0:255:2:2: class=0x060000 card=0x219617aa chip=0x2d128086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '1st Generation Core i3/5/7 Processor Reserved' class = bridge subclass = HOST-PCI hostb5@pci0:255:2:3: class=0x060000 card=0x219617aa chip=0x2d138086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '1st Generation Core i3/5/7 Processor Reserved' class = bridge subclass = HOST-PCI hostb6@pci0:0:0:0: class=0x060000 card=0x219317aa chip=0x00448086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor DRAM Controller' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x215a17aa chip=0x00468086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor Integrated Graphics Controller' class = display subclass = VGA none0@pci0:0:22:0: class=0x078000 card=0x215f17aa chip=0x3b648086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset HECI Controller' class = simple comms uart2@pci0:0:22:3: class=0x070002 card=0x216217aa chip=0x3b678086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset KT Controller' class = simple comms subclass = UART em0@pci0:0:25:0: class=0x020000 card=0x215317aa chip=0x10ea8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '82577LM Gigabit Network Connection' class = network subclass = ethernet ehci0@pci0:0:26:0: class=0x0c0320 card=0x216317aa chip=0x3b3c8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB hdac0@pci0:0:27:0: class=0x040300 card=0x215e17aa chip=0x3b568086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset High Definition Audio' class = multimedia subclass = HDA pcib2@pci0:0:28:0: class=0x060400 card=0x216417aa chip=0x3b428086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:1: class=0x060400 card=0x216417aa chip=0x3b448086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 2' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:3: class=0x060400 card=0x216417aa chip=0x3b488086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 4' class = bridge subclass = PCI-PCI pcib5@pci0:0:28:4: class=0x060400 card=0x216417aa chip=0x3b4a8086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 5' class = bridge subclass = PCI-PCI ehci1@pci0:0:29:0: class=0x0c0320 card=0x216317aa chip=0x3b348086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB pcib6@pci0:0:30:0: class=0x060401 card=0x216517aa chip=0x24488086 rev=0xa6 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Mobile PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x216617aa chip=0x3b078086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'QM57 Chipset LPC Interface Controller' class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0x216817aa chip=0x3b2f8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller' class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0x216717aa chip=0x3b308086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset SMBus Controller' class = serial bus subclass = SMBus none2@pci0:0:31:6: class=0x118000 card=0x219017aa chip=0x3b328086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset Thermal Subsystem' class = dasp iwn0@pci0:3:0:0: class=0x028000 card=0x13158086 chip=0x00848086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'Centrino Wireless-N 1000 [Condor Peak]' class = network sdhci_pci0@pci0:13:0:0: class=0x080500 card=0x213317aa chip=0xe8221180 rev=0x01 hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'MMC/SD Host Controller' class = base peripheral subclass = SD host controller none3@pci0:13:0:1: class=0x088000 card=0x213417aa chip=0xe2301180 rev=0x01 hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller]' class = base peripheral none4@pci0:13:0:3: class=0x0c0010 card=0x213617aa chip=0xe8321180 rev=0x01 hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'R5C832 PCIe IEEE 1394 Controller' class = serial bus subclass = FireWire [-- Attachment #4 --] Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #0 r312375: Wed Jan 18 10:49:16 CET 2017 root@krasznai-a.mands.hu:/usr/obj/usr/src/sys/GEN12 amd64 FreeBSD clang version 3.9.1 (tags/RELEASE_391/final 289601) (based on LLVM 3.9.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (2394.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x29ae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AESNI> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3880095744 (3700 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-6M > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20161222/tbfadt-640) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20161222/tbfadt-742) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1197026935 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO TP-6M> on motherboard acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci1 agp0: <Intel Ironlake (M) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device pci1: <simple comms> at device 22.0 (no driver attached) uart2: <5 Series/3400 Series Chipset KT Controller> port 0x1808-0x180f mem 0xf2624000-0xf2624fff irq 17 at device 22.3 on pci1 uart2: Using 1 MSI message em0: <Intel(R) PRO/1000 Network Connection> port 0x1820-0x183f mem 0xf2600000-0xf261ffff,0xf2625000-0xf2625fff irq 20 at device 25.0 on pci1 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: f0:de:f1:1b:a9:56 em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf2828000-0xf28283ff irq 23 at device 26.0 on pci1 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac0: <Intel 5 Series/3400 Series HDA Controller> mem 0xf2620000-0xf2623fff irq 17 at device 27.0 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci1 pci3: <ACPI PCI bus> on pcib3 iwn0: <Intel Centrino Wireless-N 1000> mem 0xf2400000-0xf2401fff irq 17 at device 0.0 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci1 pcib4: [GIANT-LOCKED] pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci1 pci4: <ACPI PCI bus> on pcib5 sdhci_pci0: <RICOH R5CE822 SD> mem 0xf2500000-0xf25000ff irq 16 at device 0.0 on pci4 sdhci_pci0: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci0 pci4: <serial bus, FireWire> at device 0.3 (no driver attached) ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf2828400-0xf28287ff irq 19 at device 29.0 on pci1 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci1 pci5: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci1 isa0: <ISA bus> on isab0 ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0x1860-0x1867,0x1814-0x1817,0x1818-0x181f,0x1810-0x1813,0x1840-0x185f mem 0xf2827000-0xf28277ff irq 16 at device 31.2 on pci1 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdd000-0xdffff,0xe0000-0xeffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 NULL mp in getnewvnode() fuse-freebsd: version 0.4.4, FUSE ABI 7.8 Timecounters tick every 1.000 msec hdacc0: <Conexant CX20585 HDA CODEC> at cad 0 on hdac0 hdaa0: <Conexant CX20585 Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20585 (Right Analog)> at nid 25 and 27 on hdaa0 pcm1: <Conexant CX20585 (Internal Analog)> at nid 31 and 35 on hdaa0 unknown: <Conexant CX20585 HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached) hdacc1: <Intel Ibex Peak HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Ibex Peak Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 4 on hdaa1 pcm3: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 5 on hdaa1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: 3 ports with 3 removable, self powered uhub0: 3 ports with 3 removable, self powered ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) uhub2: 8 ports with 8 removable, self powered usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT sdhci_pci0-slot0: Controller timeout sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x00000400 sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00004007 sdhci_pci0-slot0: Timeout: 0x0000000e | Int stat: 0x00000001 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000001 sdhci_pci0-slot0: Caps: 0x01e032b2 | Max curr: 0x00000040 sdhci_pci0-slot0: =========================================== usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device ada0: Serial Number S21PNSBG206397X ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 238475MB (488397168 512 byte sectors) usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ890 SB01> Removable CD-ROM SCSI device cd0: Serial Number UG99 132820 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) mmcsd0: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed 8GB <SDHC SD8GB 3.0 SN 6D3EA2A9 MFG 06/2013 by 39 PH> at mmc0 50.0MHz/4bit/65535-block Trying to mount root from ufs:/dev/ada0s3a [rw,noatime]... usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR wlan0: Ethernet address: f0:de:f1:1b:a9:56 lagg0: link state changed to DOWN iwn0: iwn_read_firmware: ucode rev=0x271f0501 usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub3: 6 ports with 6 removable, self powered usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) Link state changed to up em0: link state changed to UP lagg0: link state changed to UP ugen0.3: <Broadcom Corp Broadcom Bluetooth Device> at usbus0 link_elf_obj: symbol elf64_linux_vdso_fixup undefined linker_load_file: Unsupported file type usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR ugen0.4: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus0 usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR ugen1.3: <Unknown > at usbus1 (disconnected) uhub_reattach_port: could not allocate new device ugen1.3: <Logitech USB-PS2 Optical Mouse> at usbus1 ums0 on uhub2 ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 3> on usbus1 ums0: 8 buttons and [XYZT] coordinates ID=0help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B0F582294DE3E448963BA62DC306AEE4708990A0B>