Date: Tue, 2 Oct 2018 18:38:57 -0700 From: Jeff Chan <jeffc@supranet.net> To: freebsd-fs@freebsd.org Subject: "ZFS: can't find pool by guid" after reboot during 11.1 to 11.2 upgrade Message-ID: <609311573.20181002183857@supranet.net>
next in thread | raw e-mail | index | archive | help
Hi Folks,
Apologies in advance if this isn't the right place to ask. Wasn't
sure if it was perhaps related to the 11.2 ZFS-related boot loader
changes though.
During a FreeBSD upgrade from 11.1 to 11.2, after the reboot step
between freebsd-update installs, got an error from the boot loader:
ZFS: can't find pool by guid
ZFS: can't find pool by guid
ZFS: can't find pool by guid
can't load 'kernel'
Booting from memstick USB into liveCD to get some diagnostics:
root@:~ # gpart show
=> 34 5860533101 da0 GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 diskid/DISK-Z1Z36VFN00009426QDUJ GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 da1 GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 da2 GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 da3 GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 diskid/DISK-Z1Z38VVZ000094274QNB GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 diskid/DISK-Z1Y084BY GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 34 5860533101 diskid/DISK-Z1Y2YWBN0000C524DDKE GPT (2.7T)
34 6 - free - (3.0K)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-swap (8.0G)
16778280 5843754848 3 freebsd-zfs (2.7T)
5860533128 7 - free - (3.5K)
=> 1 62652415 da4 MBR (30G)
1 1600 1 !239 (800K)
1601 1505616 2 freebsd [active] (735M)
1507217 61145199 - free - (29G)
=> 0 1505616 da4s2 BSD (735M)
0 16 - free - (8.0K)
16 1505600 1 freebsd-ufs (735M)
=> 1 62652415 diskid/DISK-0336216080014934 MBR (30G)
1 1600 1 !239 (800K)
1601 1505616 2 freebsd [active] (735M)
1507217 61145199 - free - (29G)
=> 0 1505616 diskid/DISK-0336216080014934s2 BSD (735M)
0 16 - free - (8.0K)
16 1505600 1 freebsd-ufs (735M)
(da4 is the USB drive, obviously)
root@:~ # zpool import
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
pool: zroot
id: 12421595622411140545
state: ONLINE
status: Some supported features are not enabled on the pool.
action: The pool can be imported using its name or numeric identifier, though
some features will not be available without an explicit 'zpool upgrade'.
config:
zroot ONLINE
raidz1-0 ONLINE
diskid/DISK-Z1Z36VFN00009426QDUJ ONLINE
diskid/DISK-Z1Z38VVZ000094274QNB ONLINE
diskid/DISK-Z1Y084BY ONLINE
diskid/DISK-Z1Y2YWBN0000C524DDKE ONLINE
pool: zroot
id: 6087619269570541526
state: ONLINE
status: Some supported features are not enabled on the pool.
action: The pool can be imported using its name or numeric identifier, though
some features will not be available without an explicit 'zpool upgrade'.
config:
zroot ONLINE
raidz1-0 ONLINE
da0p3 ONLINE
da1p3 ONLINE
da2p3 ONLINE
da3p3 ONLINE
Not able to import zroot by name:
root@:~ # zpool import -fR /mnt zroot
cannot import 'zroot': more than one matching pool
import by numeric ID instead
What's the best way to fix this?
Also the zpool hasn't been upgraded in a long time, and I wonder if
that interacted with the 11.2 boot loader code change:
https://www.freebsd.org/releases/11.2R/relnotes.html#boot-loader
> 9.1. Boot Loader Changes
>
> The boot code and loader(8) have been updated to check for
> unsupported ZFS feature flags. If unsupported features are active,
> the pool is not considered as a bootable pool, and a diagnostic
> message is printed to the console. [r321519]
and the related patch:
https://svnweb.freebsd.org/base?view=revision&revision=321519
If we should do a zpool upgrade, can that be done from the liveCD
safely? This is a hot spare of a production system, and it would be
nice if it could be restored to operation with a few commands.
There's (always) the chance that a hard drive is wearing out too,
though recent zpool scrubs seem fine, and smartctl errors look ok.
Much easier to fix from a running system if needed.
Thanks in advance for any advice!
Cheers,
Jeff C.
--
Jeff Chan
mailto:jeffc@supranet.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?609311573.20181002183857>